IDENTIFY THE KEYBOARD thread

[Muirium]

Looks like it could be some slider over dome/membrane switch. Those are never any good, or at all interesting in other ways, to my knowledge.

Though I must admit Terry has me schooled on Space Invaders!

[Touch_It]

Doesn't look like stackpole at all to me. Like previously said, likely slider over membrane.

[terrycherry]

Looks like it could be some slider over dome/membrane switch. Those are never any good, or at all interesting in other ways, to my knowledge.

Though I must admit Terry has me schooled on Space Invaders!

Except the "Micro switch dome with slider" switch keyboard, this slider over dome is fascinating to type. It better than much more semi-mechanical keyboard, especially the "(Linear)Grey shell black slider with orange dome". I think it could better than model m if I can make it work and test on PC !

[gogusrl]

What's the blue switch ?

[stratokaster]

Looks like it could be some slider over dome/membrane switch. Those are never any good, or at all interesting in other ways, to my knowledge.

Though I must admit Terry has me schooled on Space Invaders!

Except the "Micro switch dome with slider" switch keyboard, this slider over dome is fascinating to type. It better than much more semi-mechanical keyboard, especially the "(Linear)Grey shell black slider with orange dome". I think it could better than model m if I can make it work and test on PC !

There are many rather nice "slider over dome" keyboards. For example, NMB slider with dome switches are very good for a rubber dome. BTW, Topre is also technically "slider over dome"

[terrycherry]

What's the blue switch ?

The top slider look like KPT switch Blue (rectangular slider) but the top was branded AE7.
And the bottom shell seems like the KPT-like switch but the base was differed the KPT switch and KPT-like switch.
I don't get any idea. Is the blue switch came with yellow KPT-like switches keyboard?
You should assemble this strange switch to see what difference it has.

[gogusrl]

Nope, they're from two different keyboards. Trying to decide which one to use in my next numpad

[terrycherry]

Please share the keyboard with that unknown rectangular blue switch.
Is the yellow one better than the blue?

[gogusrl]

I'll post more pics tonight. Both were bigass enter keyboards with generic alps doubleshots.

[gogusrl]

[stratokaster]

Aha! I know this keyboard, it was made by Key Mouse Enterprises (KME). AFAIK, they are still making keyboards of the nastiest possible kind.

Those switches are definitely not genuine Alps. The keycaps must be fairly thick doubleshots.

BTW, there were also rubber dome boards using the same case and the same FCC ID. Those come with Cherry MX-compatible doubleshots. I have one set of such caps with pad-printed red Cyrillic legends.

[gogusrl]

The keycaps are regular thin alps mount doubleshots but the switches are exquisite. I need someone to hook me with a single blue alps so I have a something to compare them to.

[seebart]

Could be KPT or another Alps clone.

http://deskthority.net/wiki/KPT_switch

[gogusrl]

They look and feel identical.




When I find the spring from the blue one or move my ass to desolder another one I'll take more pics.

[terrycherry]

So nice, the blue one is more like the KPT-like switch inside!
Could you take out the two metal leaves and make two spring together to compare of them.

I think this blue switch should be the another one variant of KPT-like switch.
Many KPT-like switches have the numbering "AB" on the base shell and this blue variant marked "AB" on the base shell too. It should be the same family. Maybe this is the later variant of "KPT-like switch" family.

[gogusrl]

oh man, they're a pain in the ass to desolder because the pins are bent and then soldered. so 1 move turns into 3 moves (heat it, straighten it up, heat it again & suck it all up). I'll get back to you when it's done

[terrycherry]

It hard to desolder when the pins were bent.
1. Put the knife on the bent
2. Keeping heat the solder until the knife lift up the pin.(be careful the gun)

[andrewjoy]

You could do that , or you could use this

http://www.ebay.co.uk/itm/Duratool-D006 ... SwT5tWLybc

[gogusrl]

I'm using this : http://yihua-soldering.com/product-1-2- ... -en/147658

and this : http://www.aliexpress.com/item/Prokits- ... 19850.html

[terrycherry]

I'm using the ProsKit pump but the another model.

01.jpg (602.42 KiB) Viewed 6592 times

Windstar RG-150_.jpg (379.61 KiB) Viewed 6592 times

IMG_4029.jpg (935.24 KiB) Viewed 6592 times

[stratokaster]

This keyboard looks vaguely familiar, but I can't quite put my finger on it. Probably something Taiwanese and Alps-like

260325506_1_1000x700_pride-expression-nikolaev.jpg (97.91 KiB) Viewed 6585 times

[Kristoffer]

Found a Clevy Keyboard at a local market, a really weird keyboard with huge keys. Can someone help me identify the switches? It haves a really nice clicky sound

Here are some pictures, and info on the keyboard

http://clevy.com/products/clevy-keyboard


I can take some better picture tomorrow if needed

[Chyros]

Generally you have to open up Alps clones to properly identify them, but in the meantime I'm going to guess Alps type T5 clone (they look very much like my own clicky T5s).

[Kristoffer]

Generally you have to open up Alps clones to properly identify them, but in the meantime I'm going to guess Alps type T5 clone (they look very much like my own clicky T5s).

Thanks for your fast reply.
I will open one tomorrow and post some new pictures

[webdev80]

Hi there, keyboard novice here. Looking for help to identify a keyboard:

I found the perfect keyboard for me, but unfortunately it was in a pc pool of our university and I didn't note down the model. However I think, it might have been distinctive enough to be identifiable:

The layout was rather casual, i.e. not "large" like a model M
The keys were distinctively "high", like the keys on this board, but even higher:
http://deskthority.net/photos-f62/ibm-m ... 12048.html

It also featured integrated LEDs on the numlock and scroll lock keys , like these:
http://deskthority.net/wiki/File:Key_Tronic_101.jpg

iirc, the brandname was hewlett packard, but I guess, that doesn't say too much....


Any help is grately appreciated!!

[ramnes]

Something like that? http://www.ebay.com/itm/181929611665

Edit: doesn't seem to have the LEDs.

[webdev80]

the "hewlett packard"-brand was the least significant bit from my description .... ^^

To sum it up:

• "normal" form factor (i.e. NOT large like a model M)
• rather high keys, like here: http://deskthority.net/photos-f62/ibm-m ... 12048.html
• integrated status-LEDs on numlock and scroll lock

Thanx in advance =D

[webdev80]

found it xD

[gogusrl]

that looks like a rubberdome.

[stratokaster]

Rubberdome with integrated LEDs? Must be Fujitsu-made.