Anybody has info/experience with this? It would be great if could be re-purposed somehow as removable keyboard cable...The RJ11 is not connected inside the case. Matter of fact, the RJ11 jack doesn't even have the metal wires installed, and there are NO PADS inside the case to which one might assume a number pad was attached. It appears that the RJ11 was intended as a removable cable for the MiniTouch itself, since the only thing within a solder splash of the empty RJ11 jack is the jack for the AT cable to attach.
RJ11 on Monterrey Minitouch
-
Alpinist
- Location: UK
- DT Pro Member: -
While eagerly waiting for a Monterrey Minitouch on the mail (thanks again Mike!), I've been checking if its RJ11 connector is functional at all and if it could be used through some kind of adaptor as a removable cable, which would be so handy... After many searches, it seems to be of no use whatsoever according to the info below, but I can't be sure if this was the case for every single model or just for that particular one, as there was so much variation and versions of the keyboard:
-
Daniel Beardsmore
- Location: Hertfordshire, England
- Main keyboard: Filco Majestouch 1 (home)/Poker II backlit (work)
- Main mouse: MS IMO 1.1
- Favorite switch: Probably not whatever I wrote here
- DT Pro Member: -
- Contact:
-
Alpinist
- Location: UK
- DT Pro Member: -
Thank you Daniel. I missed that as I was checking the wrong entry on the wiki. I was looking at the SIIG MiniTouch
wiki/SIIG_MiniTouch
Cheers
wiki/SIIG_MiniTouch
Cheers