Page 1 of 1

IBM Model F XT conversion question

Posted: 10 Jul 2017, 11:11
by SeanTNT
Hello,

I recently came upon a IBM Model F but it has a XT cable. So I was wondering if it was possible to convert it to a PS/2 with something like this.
http://www.ebay.com/itm/6-Pin-Mini-Din- ... Sw0j9ZWEd8 to this http://www.ebay.com/itm/NEW-PS2-to-USB- ... xyB0VRs7eh. I would have bought the XT/AT to USB sold by orihalcon on ebay but I already have the PS/2 to USB from a Model M.

Thanks.
Sean

Posted: 10 Jul 2017, 13:35
by wobbled
Wont work because the Model F speaks XT and that is an AT adapter, you'll need the soarers converter from orihalcon.

Posted: 10 Jul 2017, 13:36
by SeanTNT
Thanks for the info

Posted: 10 Jul 2017, 13:41
by wobbled
Just to be sure, it's the 83 key XT you bought with the weird layout right? And not the 84 Key AT?

Posted: 11 Jul 2017, 02:11
by SeanTNT
Yes, it the 83 kye with the step keys instead of stabilizers

Posted: 11 Jul 2017, 02:28
by orihalcon
I think you can actually use an AT to PS/2 adapter with the XT as long as you then use it with the PS/2 to USB Soarer's converter as the pins all end up being the same and the Soarer's Converter will auto-detect the XT protocol :)