Replace switches in a mouse (Roccat Kone XTD)

[Yosuu]

Is it possible and if so how hard to replace the left and right button switches mouse buttons in a mouse? More sepcifically the Roccat Kone XTD, also would you have to solder?

[Rayndalf]

Do you found a picture of the PCB? It should be a pretty easy, assuming they're normal omrons. With a little flux and a solder pump it shouldn't be too bad, but sometimes solder really wants to stick to the PCB.

[Yosuu]

Heres a picture of the pcb https://imgur.com/a/P5lZ9V8, thanks for the help.

[Rayndalf]

Those are standard size microswitches, so any video about switch replacement should be applicable.
https://youtu.be/NL-V9Pi_en4&t=2m15s

[anthonymak]

try this before you decide to replace the microswitch.

https://www.youtube.com/watch?v=eDoXMJyimDU

[Tahoma]

They should be relatively easy to desolder and replace, as they are through-hole mount and a nice size to work with.

I’d first remove as much solder as possible with a pump or braid, then heat each pin in turn with an iron and work it free (protect your fingers from the heat).