[GB] NOS Alps SKCM White | GB Closed
- brasspanels
- Location: singapore
- Main keyboard: M0116
- Favorite switch: alps babyyyy
I would order a couple as well!
- swampangel
- Location: Canada
- Main keyboard: Northgate Omnikey 101
- DT Pro Member: -
https://www.reddit.com/r/mechmarket/com ... lps_white/ for anyone who was waiting for another round. Reddit does seem like the best bet to hit MOQ.
-
- Location: Stara Pazova
- Main keyboard: DZ60 Kailh BOX Navy GMK keycaps
- Main mouse: A4 Tech X7
- Favorite switch: Kailh BOX Navy
- DT Pro Member: -
Awesome.
Recently I finally completed my SKCM Blue ALPS Build, but the switches were in pretty bad shape.
It would be interesting comparing used Blue ALPS with NOS White ALPS.
Recently I finally completed my SKCM Blue ALPS Build, but the switches were in pretty bad shape.
It would be interesting comparing used Blue ALPS with NOS White ALPS.
- TheInverseKey
- Location: Great White North
- Main mouse: M570
- Favorite switch: Hi-Tek 725 Linear
- DT Pro Member: 0216
- Contact:
If you clean the switches the best you can then replace the top housing then they should turn out really well.
-
- Location: Stara Pazova
- Main keyboard: DZ60 Kailh BOX Navy GMK keycaps
- Main mouse: A4 Tech X7
- Favorite switch: Kailh BOX Navy
- DT Pro Member: -
I desoldered the switches. Gave them a denture tab bath. Lubed the stems with some dry Teflon lube.
Never realized that replacing the top housing improves ALPS switches.
Maybe I'll give that a try at one point.
What's the reasoning in that? Maybe the sliders don't slide that well in some old housing worn out by dust?
Never realized that replacing the top housing improves ALPS switches.
Maybe I'll give that a try at one point.
What's the reasoning in that? Maybe the sliders don't slide that well in some old housing worn out by dust?
- abrahamstechnology
- Location: United States
- Main keyboard: Laser with SMK Cherry mount
- Main mouse: Mitsumi ECM-S3902
- Favorite switch: Alps and Alps clones
- DT Pro Member: 0212
Replace the click leaf from a Matias one. Matias click leaves are almost identical and a worn out click leaf adds a lot of scratch to a switch (Restoring an extremely worn out and dirty Pine White Alps board right now and can confirm with a few loose switches I've modded.
Also I've found out that the WD40 Specialist dry PTFE works better than the Dupont stuff.
Also I've found out that the WD40 Specialist dry PTFE works better than the Dupont stuff.
-
- Location: Stara Pazova
- Main keyboard: DZ60 Kailh BOX Navy GMK keycaps
- Main mouse: A4 Tech X7
- Favorite switch: Kailh BOX Navy
- DT Pro Member: -
- swampangel
- Location: Canada
- Main keyboard: Northgate Omnikey 101
- DT Pro Member: -
-
- Location: KR
- Main keyboard: MKG-1
- Main mouse: K95
- Favorite switch: Futaba MA41
-
- Location: KR
- Main keyboard: MKG-1
- Main mouse: K95
- Favorite switch: Futaba MA41
Hi! I'm currently preparing an invoice by hand.
I also need to order boxes and prepare subdivisions. Shipment will end before Christmas. Please wait!
I also have a full-time job, so maybe I can forget about updates. You'll probably find the latest updates on Reddit.
- swampangel
- Location: Canada
- Main keyboard: Northgate Omnikey 101
- DT Pro Member: -
My R2 switches arrived today
-
- Location: Austria
- Main keyboard: CM Novatouch
- Main mouse: Logitech G Pro Wireless
Mine were delivered two days ago, just picked them up from my post office. Thanks for organising the group buy .
As a side note, does the korean postal service not offer printable shipping labels for consumers? Writing all by hand seems tedious.
As a side note, does the korean postal service not offer printable shipping labels for consumers? Writing all by hand seems tedious.
- Muramasa
- Location: Scotland
- Main keyboard: IBM 3276 Cyrillic
- Main mouse: Razer Deathadder
- Favorite switch: Beamspring / SKCM Blue
- DT Pro Member: -
- Contact:
It’s now March and I don’t have my order, I’m quite concerned
-
- Location: Stara Pazova
- Main keyboard: DZ60 Kailh BOX Navy GMK keycaps
- Main mouse: A4 Tech X7
- Favorite switch: Kailh BOX Navy
- DT Pro Member: -
Apparently mine got lost in shipping.
I'm now waiting for a replacement shipment with a photo confirmation that it's sent.
I'm now waiting for a replacement shipment with a photo confirmation that it's sent.
Last edited by DaOver on 09 Mar 2020, 10:12, edited 1 time in total.
-
- Location: United Stated
- Main keyboard: Ducky One 2
- Main mouse: Roccat Kone Pure
- Favorite switch: Buckling Spring
-
- Location: Stara Pazova
- Main keyboard: DZ60 Kailh BOX Navy GMK keycaps
- Main mouse: A4 Tech X7
- Favorite switch: Kailh BOX Navy
- DT Pro Member: -
He did respond to me, we exchanged a few emails.
He said he is sorry for the lost package and that he is gonna ship a new package with some spare switches that he had left.
Last I heard from him was on 27th of February, he said that he's very busy and that he'll send me the photo confirmation of a replacement package sent to me.
He said he is sorry for the lost package and that he is gonna ship a new package with some spare switches that he had left.
Last I heard from him was on 27th of February, he said that he's very busy and that he'll send me the photo confirmation of a replacement package sent to me.
-
- Location: Stara Pazova
- Main keyboard: DZ60 Kailh BOX Navy GMK keycaps
- Main mouse: A4 Tech X7
- Favorite switch: Kailh BOX Navy
- DT Pro Member: -
I decided to contact him, since it has been over a month since we heard from each other.
To my surprise I got an email back with a picture of my package. So hopefully I'll get one soon in the mail.
To my surprise I got an email back with a picture of my package. So hopefully I'll get one soon in the mail.