Page 1 of 7
For Sale: Genuine Cherry/GMK Stabilizers
Posted: 14 Jun 2017, 21:32
by faxe
Code: Select all
ISO TKL60% (3x 2u, 6.25 or 7u, PCB or Plate) 6 Euro
ANSI TKL60% (4x 2u, 6.25 or 7u, PCB or Plate) 7 Euro
ISO Full (6x 2u, 6.25 or 7u, PCB or Plate) 9 Euro
ANSI Full (7x 2u, 6.25 or 7u, PCB or Plate) 10 Euro
ISO TKL60% (3x 2u, 6.25 or 7u, Screw In) 7 Euro
ANSI TKL60% (4x 2u, 6.25 or 7u, Screw In) 8 Euro
ISO Full (6x 2u, 6.25 or 7u, Screw In) 10 Euro
ANSI Full (7x 2u, 6.25 or 7u, Screw In) 11 Euro
Super Lube 1CC (only with stabilizer kit) 1 Euro
Torx Screw instead of Philips head +0,75 Euro
Single Stabilizers (2u,
3u, 6.25u, 7u) and single wires (6.25,7) also available!
Posted: 16 Jun 2017, 05:30
by gnmar2723
Are they genuine or china knock-off?
Posted: 16 Jun 2017, 08:28
by faxe
Genuine.
Posted: 16 Jun 2017, 12:56
by xantiema
What is the shipment cost ? ISO Full (6x 2u, 6.25 or 7u) 11 Euro
Are they screw-in?
Posted: 16 Jun 2017, 13:45
by Stabilized
xantiema wrote: ↑What is the shipment cost ? ISO Full (6x 2u, 6.25 or 7u) 11 Euro
From the OP:
faxe wrote: ↑
Includes free shipping worldwide!
xantiema wrote: ↑Are they screw-in?
No, they are the ones that use plastic clips.
Posted: 16 Jun 2017, 14:04
by faxe
What Stabilized said
Posted: 19 Jun 2017, 03:51
by gnmar2723
Ok, now that I've found some time, PM'D!
Posted: 21 Jun 2017, 22:04
by Ravahan
Would like to buy a set, located in the netherlands, please pm me
Posted: 22 Jun 2017, 08:36
by faxe
Replied!
Posted: 22 Jun 2017, 13:56
by TuxKey
Nice GB...
just a couple days ago i was looking in to the Tada68 and mailed KBDfans guys asking if it they were using Cherry or replica's
Lots of people complaining about rattling and such..
Answer was no not Cherry..
Not the answer you would like to hear..
I would love to join..but i'm far , far away from building my own keyboard or modding..
Just started to look in to soldering iron's and desoldering guns..and all that is involved with that..
Even the current WhiteVox Kickstart has an option for a kit, and i presume the freedom to go with the Vanilla layout that i prefer above the true-fox layout.
perhaps in the future..i can join these kind of GB and know what i'm doing..For now i'l have to stick with the k-type prebuild board. (don't look forward to all the customs crap i wil have to pay..hate that chit.)
Posted: 29 Jun 2017, 10:32
by hypkx
Got also my stabilisers, really fast delivery and a good product, works perfect. Thanks faxe.
Posted: 06 Jul 2017, 08:27
by faxe
Still more available! Also Bump goes the weasel.
Posted: 07 Jul 2017, 12:44
by hypkx
I ask for a friend, are 6,5u wires also available?
Posted: 07 Jul 2017, 15:19
by faxe
Sorry, 6.5 u wires are not available. Out of interest, where would you need it?
Posted: 07 Jul 2017, 16:34
by t8c
A guy on reddit can custom length stab wire using copper plated steel wire
https://www.reddit.com/r/MechanicalKeyb ... pper_wire/ .
Posted: 07 Jul 2017, 17:52
by hypkx
I can make them also, what I probably also will do. Thanks for the answer I just want to check if there is a easier way. He will build a custom keyboard, the same I build already (look in the picture section of the forum).
Posted: 22 Jul 2017, 14:57
by faxe
Everything still available. Also, *bump*
Posted: 13 Aug 2017, 15:20
by Veggis
PMd
Posted: 30 Aug 2017, 10:56
by Roboduck
I would like to buy 2 ANSI TKL/60% sets!
Posted: 31 Aug 2017, 08:26
by faxe
PM'ed! Also, everything still available!
Posted: 31 Aug 2017, 21:15
by Glue415
Hi, new to deskthority, would like to get some stabs, could you pm me when you have the time? thanks.
Posted: 31 Aug 2017, 21:34
by faxe
PM'ed! And welcome to deskthority!
Posted: 07 Sep 2017, 11:29
by faxe
Bumpity Bump! Also, will be at
MECHANICON 2017 with special offers!
Posted: 15 Sep 2017, 04:55
by iDarKz
Ordered a set this weekend, shipped Monday and received them Thursday. If you're looking for stabs I can only recommend faxe. Thanks again
Posted: 15 Sep 2017, 14:58
by faxe
You are welcome!
Posted: 09 Oct 2017, 08:53
by faxe
Less than a week to
Mechanicon! Meet me there for stabilizers! (and keyboard talk)
Posted: 30 Oct 2017, 09:41
by faxe
Monday in between two weekends bump!
Posted: 03 Nov 2017, 17:56
by Sputnik
@faxe: you have a pm
Posted: 03 Nov 2017, 18:45
by faxe
You have a reply! And now a package on the way!
Posted: 04 Nov 2017, 17:27
by TuxKey
do you have sum left? i'm expecting my k-type any day now and think i'l be needing a set to replace the stabilisers on it.
but would also need the correct lube..the only thing i know how to get here is Super Lube..
But asked people for tips and help..