[WTS] New, unused vintage Hall Effect switches Zbrojovka Brno 262.12 keyboard - working on AT !! - SOLD
Posted: 11 May 2020, 18:47
New, unused vintage Hall Effect switches Zbrojovka Brno 262.12 keyboard - working on AT !!
Made in 1990 by Brno Small Arms Factory in Czechoslovakia, not former Soviet or Russia
.
The keyboard has a AT protocol ROM content, can be equiped also with XT ROM content.
ROM concent is stored on Intel D8748 (this model) or can be stored on TESLA MHB 8748C (east European block clone of Intel).
Caps are thick doubleshot ABS.
Uses TESLA Hall sensors - it is a copy of the Micro Switch SW or SD Series sensors made in central Europe in 1980's and 90's.
More photos at the end of article in Spoiler.
Condition:
New, unused, clean - may has some dust or mess.
Nice white color.
Caps are in perfect shape, with rough untouched surface. No chips or scratches on the top, only several small scratches and chips on the sides caused by incorectly storage (only in thick plastic bag).
Damages, but only light:
(right ENTER,right SHIFT, right CTRL, not sure if Spacebar, - in numeric part)
Plastic body - perfect, with some small scratches in the corners, caused again because of storage.
One rubber feet is missing.
Without original box.
Contains a color photocopy of original manual and reference, I made it from original.
Tested on my PC AT iCore3 WIN10 in USB port, with 5DIN --> PS2 adapter and then PS2 --> USB. You do not need to modify the keyboard. All functions are working with this simple and cheap solution.
Keybard works nicely, all caps and LEDs are working.
Weight: 2,4KG without additional box
I accept PayPal or bank transfer for the payment.
Asking 200€ + shipping.
Shipping from Prague, Czech Republic, Europe:
EU - about 15€ - ask for specific country
USA - only with regular post (more than 2KG) - about 45€ - the cheapest way
Asia - ask for shipping, probably similar to USA
Additional photos:
Made in 1990 by Brno Small Arms Factory in Czechoslovakia, not former Soviet or Russia
.The keyboard has a AT protocol ROM content, can be equiped also with XT ROM content.
ROM concent is stored on Intel D8748 (this model) or can be stored on TESLA MHB 8748C (east European block clone of Intel).
Caps are thick doubleshot ABS.
Uses TESLA Hall sensors - it is a copy of the Micro Switch SW or SD Series sensors made in central Europe in 1980's and 90's.
- IMG_8061.JPG (1.94 MiB) Viewed 4148 times
Condition:
New, unused, clean - may has some dust or mess.
Nice white color.
Caps are in perfect shape, with rough untouched surface. No chips or scratches on the top, only several small scratches and chips on the sides caused by incorectly storage (only in thick plastic bag).
Damages, but only light:
(right ENTER,right SHIFT, right CTRL, not sure if Spacebar, - in numeric part)
Plastic body - perfect, with some small scratches in the corners, caused again because of storage.
One rubber feet is missing.
Without original box.
Contains a color photocopy of original manual and reference, I made it from original.
Tested on my PC AT iCore3 WIN10 in USB port, with 5DIN --> PS2 adapter and then PS2 --> USB. You do not need to modify the keyboard. All functions are working with this simple and cheap solution.
Keybard works nicely, all caps and LEDs are working.
Weight: 2,4KG without additional box
I accept PayPal or bank transfer for the payment.
Asking 200€ + shipping.
Shipping from Prague, Czech Republic, Europe:
EU - about 15€ - ask for specific country
USA - only with regular post (more than 2KG) - about 45€ - the cheapest way
Asia - ask for shipping, probably similar to USA
Additional photos:
Spoiler: