deskthority

Stuff that is free together with the other stuff - only free TOGETHER with something you PAY (I just say it, because there always some begging people in my DMs who can't read).

DCS blank keycaps for a iso tkl, I wrote with permanent maker on them
https://i.imgur.com/svzkRkB.jpg
https://i.imgur.com/5ssTiFc.jpg
Keycaps tkl iso de, cheap ones
https://i.imgur.com/FtrzDNU.jpg

Sale:

Red scarf 3 keyboard
PCB is fried
96% keyboard
Gateron red
Backlight and RGB underglow
CNC milled Aluminium case (high lip) with acrylic backplate and a self-made steel backplate
From a Massdrop group buy
I fried the PCB with a static shock, now it just spams buttons, maybe can replace the controller or simply just drop in a new 96% PCB, the case is still very nice
45€
https://i.imgur.com/wM3EXai.jpg
https://i.imgur.com/tb0Q4u5.jpg
https://i.imgur.com/ZjPjxNK.jpg
https://i.imgur.com/ZbcM6ar.jpg
https://i.imgur.com/LRhmHpd.jpg




Buger bbox Cyber 60% case
Like new, but I had to cut two standoffs, because the interfered with the PCB, if you use a standard 60% PCB those standoffs will not be used 15€

60% keyboard
Uses a original gh60 PCB
Tab key is not working, otherwise everything works (the slider switch has no function and was before for the backlight)
The keyboard is in a rough shape
Switches are gateron black
The plate is cut in some places
https://i.imgur.com/vOyuX9D.jpg
https://i.imgur.com/otXERlq.jpg
https://i.imgur.com/AWr6HVS.jpg
https://i.imgur.com/LOw6jfb.jpg
Comes together with:
60% original poker case
Outside is relatively okay, there are two marks on the right lip
Inside is dremeled out, because, there was PCB with backlight installed and it didn't fit, if you put a PCB in place (everything works normally) you can't see anything from the damaged inside
https://i.imgur.com/iAfd6ZY.jpg
https://i.imgur.com/27yYuRt.jpg
https://i.imgur.com/GaZecjI.jpg
And official cherry neoprene keyboard bag
20€

bag with the really crappy unsoldered mx blues
2€
https://i.imgur.com/bKSoA7z.jpg
https://i.imgur.com/GC1j4wA.jpg
https://i.imgur.com/zJCZqX3.jpg
https://i.imgur.com/S1tN2Mk.jpg


DT SA keycap row 3
Grey from 7bit groupbuy
The stem is a bit loose, if you turn the keyboard it will not fall, but it kinda feels like you have lubed the stem if you put it on. 3€ BUY everything of the above for: 60€

Now the real stuff:
Model F62. I think I paid around 360€ for it. (I know it's now cheaper) It is from the first run.
It has some small blemishes, which are normal for the first run.
I installed a solenoid and a solenoid driver board.
It hast one piece German iso keycaps (OG IBM)
It also has relegendable keycaps and blank keycaps.
Practical unused
I want 370€ for it. [Not for sale anymore]
https://i.imgur.com/w1du5Bn.jpg
https://i.imgur.com/otNYpTz.jpg
https://i.imgur.com/S0iUi6i.jpg
https://i.imgur.com/qJsPxWl.jpg
https://i.imgur.com/dewaVk9.jpg
https://i.imgur.com/rof9KtM.jpg
https://i.imgur.com/cEXDVcc.jpg
https://i.imgur.com/s2hdwVo.jpg
https://i.imgur.com/95HN0Hw.jpg
https://i.imgur.com/NnY7WKv.jpg
https://i.imgur.com/zw85aF1.jpg

Sold
I also have a IBM 5251 beamspring, didn't take pictures jet, because I thought on greedbay I will have more luck (the last Beamer sold kinda low here and to be honest, I need the money). Working and restored, new foam, solenoid driver and solenoid, 800€ - hard to part with it, but yeah..

Ah, and I get the complain quite often, I will ship slowly. I am not a machine and work 5 days a week, so if you want same day shipping, amazon might be the better seller. Of course I will do my best;).

Shipping preferred EU, but lets see. Pickup Berlin.

pmd

Sold some stuff and reduced some prices.

bump, reduced prices, some stuff is sold

Bump

Bump and final price reduction

Beamspring sold for 700€. Other stuff is still available.

PM’d

Chinese gmk Set sold, also bump

Bump, get everything for 60€:).