Question: connect points on A-Star 32U4 Micro for USB breakout board
Posted: 25 Nov 2018, 22:38
All soldering and circuit board gurus and experienced hobbyists,
I want to solder a mini-USB breakout board to an A-Star 32U4 Micro.
Can I have some pointers where the wires should be soldered to?
Here is an example of connecting a similar USB breakout board to an Arduino pro micro:
"...4 cables were directly soldered to the pro micro: The UVCC at the polyfuse input, the D+ and D- at the output of their respective 22ohm resistors..."
Information about A-Star 32U4 Micro:
https://www.pololu.com/docs/0J61/3.1
https://www.pololu.com/product/3101/resources
I want to solder a mini-USB breakout board to an A-Star 32U4 Micro.
Can I have some pointers where the wires should be soldered to?
Here is an example of connecting a similar USB breakout board to an Arduino pro micro:
"...4 cables were directly soldered to the pro micro: The UVCC at the polyfuse input, the D+ and D- at the output of their respective 22ohm resistors..."
Spoiler:
Information about A-Star 32U4 Micro:
https://www.pololu.com/docs/0J61/3.1
https://www.pololu.com/product/3101/resources