deskthority

Got your lube =)))

Would like to have a "hhkb" set for the upcoming GH60. Interested.

I go through paypal and print off addresses when I ship. It's a pain in the ass to sift through all my PMs and such to see if people want me to ship somewhere else. Plus paypal only protects the seller if they ship to the "seller protection address" that people enter into their paypal accounts. It'...

I'm in for 2 =).

My order has been cancelled due to some issues. So, I was wondering if anyone has these kits they're willing to sell. ROUND3/ALPHA |A-Z and Punctuation keys |32.00| 1| 54| 32.00 ROUND3/SPACEOLD/BLACK|7 units Cherry no Windows | 2.00| 1| 1| 2.00 ROUND3/SPACEOLD/GREY |7 units Cherry no Windows | 2.00|...

I'm interested in one also. Is it too late?

Index wrote:I just received my invoice, it seems that my invoice is empty. I paid for my invoice awhile ago (I think 1-2 months ago), is there a reason why my invoice is empty? Just a bit worried.

I asked this before (didn't get an answer) but I'm a bit confused/worried about my invoice still.

I just received my invoice, it seems that my invoice is empty. I paid for my invoice awhile ago (I think 1-2 months ago), is there a reason why my invoice is empty? Just a bit worried.

I see the groupbuy is now finished. However, I am just now sending the shipment info. I hope this isn't too late.

Not gonna lie, this project is put on hold for awhile. Why? Because Guild Wars 2. Been waiting for that game since 2006 (or whenever it was first announced).

Found a mini usb smt port that I can use with the PCB.

http://www.hirose.co.jp/cataloge_hp/e24000019.pdf

Just need to make a new footprint for it.

Bpiphany, freaking baller. I'm so close to finishing this (couldn't have done it w/o you), then off to prototyping.

Yeah, I figured out and fixed the problem with the diodes a couple of hours after I posted the update. I still need to go verify all the components and make sure they're being wired correctly. As for that Poker Mount, is that for the Mini USB connector?

Moar Updates!!: Completed: - Fixed the layout of the cherry mx footprints (based on .75" instead of 19mm). - Swapped all through-hole diodes with SOD-123 diodes. Todo: - Fix spacebar footprint (still 6.25u, needs to be 7.00u). - Place the USB footprint. - Place all resistors, diodes, capacitors, cry...

New update! - Added .brd and .net files. - Most of the .brd is done, just need to do the following: 1) change the spacebar footprint to 7.00u. 2) change the dip switch from a 3 to a 4. 3) place all the resistors 4) figure out the correct placement for the mini usb 5) change all the diodes to SMT

bpiphany wrote:Did I point you to my KiCAD tutorial files on github already? I added frames to the Cherry footprints there to make it obvious that they are correctly spaced. I really should continue writing on that thing today...

Omg, can I steal some of those files!??!?!

Edit: I'm stealing all of it.

So, I think I'm almost done with this. I just need to figure out the correct spacing between the cherry mx footprints.

Updated the schematic. =)

Nevermind, just found out a pull up resistor is the same as a regular resistor...

Also, bpiphany do you have a KiCAD .lib and .mod file for a pull up resistor?

Should I get SMD diodes also? Probably should.

Ahh kk, makes sense. I now know what a fuse does.

Well I'm pretty sure this pcb is going to be pretty much done by the end of this week.

Since it's designed to fit in poker cases, I wonder if a groupbuy (like the Phantom) would be popular. Or course, I would not want to deal with that at all. =/

I think for the DIP-switches, you really only need to connect one of the sides to GND, and use pull-up resistors on the pin you connect to the other side. That way you will know which way the DIP is switched, and it gives you double the number of DIPs =) And I don't think it is a very good idea to ...

New update!

1) Added dip switches
2) Pruned some outdated files
3) Created a github repo for the entire project: https://github.com/callenrosario/index_keyboard

Hmm, I think for the free pins, i'll connect a dip switch. Just like how to Poker has a dipswitch.

I think I can connect a 3 switch Dip Switch using the ICSP pins and the 3 Leftover pins.

Here's an updated version, tried to follow ur advice bpiphany.

There are still some wires that look like they end up in the middle of nowhere. And I think it is customary to only use vertical and horizontal wires with 90° bends, for a good reason... Sorry about that, I literally just did what u told me to do in the geekhack forum and just connected the wires f...

Here are the project files with the required .lib and .mod files. Sorry, about that. Also, what are you talking about spilling my username and os, where is that stored?

Here's the updated project files with both the breakout board and the cherry switches.

Can someone please look over the schematic? I know nothing about pcb design and I'm pretty much doing this for the first time.

Hi all, Been working on this PCB for the past week using KiCAD. I got my layout done, I just need to add in the Teensy into the PCB. However I want to use the SMD components from the teensy. I've got the correct microcontroller on it already, I just need to mini usb and the rest of the Teensy compon...