Taking One for the Team: HP 46011A Keyboard

[OldIsNew]

I've seen these boards a number of times and have wondered about them. I've seen a post or two saying they are rubber dome but they didn't seem definitive. So ... when I came across one, for not a lot, I bought it. I thought the red keys and such looked kinda cool.

front.jpg (346.36 KiB) Viewed 6438 times

back.jpg (262.82 KiB) Viewed 6438 times

label.jpg (237.59 KiB) Viewed 6438 times

So here's the deal: It is rubber dome, but hey - sometimes that can be ok.

keys2.jpg (265.17 KiB) Viewed 6438 times

Here's the back board - notice the copper tracings. They are facing toward the back and the non-conductive side towards the keys. Guess had some left over PCBs:

backboard.jpg (269.63 KiB) Viewed 6438 times

Here's the back of the membrane:

membrane1.jpg (627.12 KiB) Viewed 6438 times

front of membrane and rubber domes:

membrane2.jpg (281.72 KiB) Viewed 6438 times

Another view:

keys1.jpg (252.35 KiB) Viewed 6438 times

OK so it's rubber dome, but how does it feel?

Well, I would have to say that if Hans Gruber put a gun to my head and said "Either type a twenty page term paper on this keyboard, or stick a red hot needle into your right eye," I would ask him to at least let me think about it for a minute.

I'm not really sure I'm going to make the attempt to convert this one.

[Blaise170]

I've always wondered about these and never picked one up because I'd always heard that they are rubber dome. My finances appreciate your sacrifice. I'll make the assumption then that most HP terminal boards are rubber dome, since they all have the same key shape.

[Daniel Beardsmore]

So not too bad, then, all round?

What does the writing say on the membrane? Any hint as to which muppets made this thing for HP?

[OldIsNew]

So not too bad, then, all round?

What does the writing say on the membrane? Any hint as to which muppets made this thing for HP?

Well I guess as compared to a hot needle in the eye.

Here are the claims of responsibility on the membrane:

20180224_212417.jpg (135.37 KiB) Viewed 6321 times

20180224_212614.jpg (128.46 KiB) Viewed 6321 times

[Daniel Beardsmore]

Strange, I would have expected the membrane to have come from some company in Taiwan.

[Noobmaen]

Interesting to see these also come in a rubber dome version, I thought all HP 460XX keyboards with this layout were in fact Fujitsu leaf spring. On closer inspection, this looks like the rubber dome version, because the rounded protrusion around the stem is visible beneath the top row keycaps, while this is evidently leaf spring

[Chyros]

Heh, it's almost af if everyone really WANTS these to be mechanical because they look pretty interesting xD .

[Noobmaen]

Heh, it's almost af if everyone really WANTS these to be mechanical because they look pretty interesting xD .

Some of these definitely are Fujitsu leaf spring:

[OldIsNew]

Some of these definitely are Fujitsu leaf spring:

As you noted, a very similar board - but not the same one. The leaf spring version you found is a 46010A:

10a.jpg (30.46 KiB) Viewed 6209 times

My rubberdome is a 46011A:

label.jpg (237.59 KiB) Viewed 6209 times

So I think you've pointed out a very helpful tip for sure. I would like a FLS version of this board and at least it looks like we now know what we need to look for!

[Noobmaen]

Here is another one which sold recently, this time in mint condition. I suspect it's the rubber dome version based on the rounded bump below the top row key caps.

[Blaise170]

And so the plot thickens!

Anecdotally it looks like the last digit gives switch type, with 0 indicating Fujitsu and 1 indicating rubber dome. Makes me wonder what other versions of this board might exist.

[elecplus]

I have had plenty of both. They turn banana yellow in under 6 months. I sold mine to HP dealers for about $10 per board and counted myself very lucky. There were absolutely awful to me. The caps felt gritty, the typing on both Fujitsu and RD was bad. I do not pick these up from recyclers at all anymore. Sun makes a much better Fujitsu keyboard.

[Blaise170]

I have had plenty of both. They turn banana yellow in under 6 months. I sold mine to HP dealers for about $10 per board and counted myself very lucky. There were absolutely awful to me. The caps felt gritty, the typing on both Fujitsu and RD was bad. I do not pick these up from recyclers at all anymore. Sun makes a much better Fujitsu keyboard.

The Japanese boards I've found with Fujitsu have been quite nice, specifically the FM Towns keyboards I've bought. Interesting that the feel could differ so much between manufacturers. Have you by chance seen any other switches in HP terminal boards?

[elecplus]

The Japanese boards I've found with Fujitsu have been quite nice, specifically the FM Towns keyboards I've bought. Interesting that the feel could differ so much between manufacturers. Have you by chance seen any other switches in HP terminal boards?

Yes. I came across an old box of HP keyboards last week. I will try to post some pics on Tuesday.

[Findecanor]

As you noted, a very similar board - but not the same one. The leaf spring version you found is a 46010A:
...
My rubberdome is a 46011A:

I have had a rubber dome one in Swedish layout. It was a 46021AS.
Yes, I had also bough it in the hopes that it would have been a leaf-spring keyboard.

It was unusual though in that it used an ANSI Return key and all the textual legends were in Swedish and mixed-caps except for CTRL and ESC. On almost every other platform Swedish layout legends are in English.

[OldIsNew]

OK, so I've cleaned up the board and even lubed the rubber domes and switches with a low viscosity plastic safe silicon product. I still don't really like the feel of the switches - the thing is I never buy a board without the intention of making it work if I can. I'm still very unsure I want to spend anymore time on this one.
Here's a video of typing on it - this board is NOT converted - it's just me banging away on it.

So here's the question: Should I try to get it working, or just dig a hole in my backyard and give it a decent burial? At this point what you say (if anything) determines its fate. Thanks for any input. If I get none, or "dig the hole, " I won't feel so bad.

[Blaise170]

Donate it to a thrift store and claim it on your tax returns.

[Clavius]

If you have no intention of ever using it, why bother? In my opinion rubbish is only elevated to 'vintage collectible' if it represents something significant like being the peak of engineering excellence, or is still practically usable. If its not that, its just rubbish and is better recycled.

[urbancamo]

I worked for a software house between 1992 and 1993 and they ported their 4GL to any and every Unix machine where a license was bought. The guy who sat behind me had a HP Unix workstation with one of these style keyboards and I remember back in the day how much it sucked. I was on the VAX/VMS porting team and had a LK401 keyboard, so didn't really fair much better. When I got off the porting team I was using a 386 workstation running Interactive Unix and salvaged/repaired an alps based keyboard to use on it, infinitely nicer

However, I returned to VAX/VMS land in a 'retro' sense and have since acquired a Cherry Black VMS layout keyboard - an altogether much nicer experience!

Peace. Mark.

[OldIsNew]

Yes, I think it is for the best. It's in a happier place now.

bye.jpg (299.75 KiB) Viewed 5998 times