Favorite rubber dome keyboard?
- Daniel Beardsmore
- Location: Hertfordshire, England
- Main keyboard: Filco Majestouch 1 (home)/Poker II backlit (work)
- Main mouse: MS IMO 1.1
- Favorite switch: Probably not whatever I wrote here
- DT Pro Member: -
- Contact:
Yes they are — after all, they confirmed to me that "Monterey" switches were from SMK, remember? ;-) Also, they provided the identity of the manufacturer of the Cherry MX clones they used (Yali AKA Aristotle, who were only able to tell me that they no longer manufacture those switches).
I dropped a message to my contact there in the hope that they might still have the part numbers for the little Mitsumi switches (KLT-11/KLT-II/KLT-2, depending), but I've not heard back, nor did I hear back from Mitsumi.
I assume NMB still make keyboards, too, and Silitek/Lite-On. I'm more curious who Dell's "secret" OEMs are (e.g. who made the Dell L-100 keyboard?) Dell currently have Primax as one of their keyboard OEMs (another company from Dongguan in China), which is a new name to me, and the Primax-made OptiPlex keyboard isn't bad at all. (Not to be confused with Primark.)
-
- Location: Cairns, Australia
- Main keyboard: Leopold FC700R
- Main mouse: Whatever is laying around. Don't use it much
- Favorite switch: Cherry Red + O-rings
- DT Pro Member: -
- Contact:
I really like Apple's current generation scissor switch keyboards when they are brand new. In fact, I like them better than the mechanical keyboards I've tried (haven't tried many).
But they quickly deteriorate into something horrible and buying a new keyboard frequently is outside my budget range.
So I only use their bluetooth keyboard for my tablet. And I generally only use the tablet for stuff that doesn't involve much typing. Honestly I just use the touchscreen keyboard most of the time.
But they quickly deteriorate into something horrible and buying a new keyboard frequently is outside my budget range.
So I only use their bluetooth keyboard for my tablet. And I generally only use the tablet for stuff that doesn't involve much typing. Honestly I just use the touchscreen keyboard most of the time.
- Muirium
- µ
- Location: Edinburgh, Scotland
- Main keyboard: HHKB Type-S with Bluetooth by Hasu
- Main mouse: Apple Magic Mouse
- Favorite switch: Gotta Try 'Em All
- DT Pro Member: µ
I used to like scissor switch boards before I got into mechanicals. They feel too THUMP THOMP THOMP to me now, with their immediate hard landing. Especially the shallower ones Apple uses on Mac laptops nowadays. When it comes to saving space (and actually getting into laptops) they are a winner, and the backlighting is better than any mechanical's, but everything else is compromised and that's the stuff I really care about.
Touch screen typing is an odd one. I do a lot of it as well. More effective than it should be. A keyboard which takes no physical space at all has the supreme advantage of always being there, no matter what. And, honestly, I'd rather type on an iPad all day than most cheap keyboards!
Touch screen typing is an odd one. I do a lot of it as well. More effective than it should be. A keyboard which takes no physical space at all has the supreme advantage of always being there, no matter what. And, honestly, I'd rather type on an iPad all day than most cheap keyboards!
-
- Location: Austria
- Main keyboard: filco, zowie
- Main mouse: SS RAW, Mionix
- Favorite switch: brown
- DT Pro Member: -
Cherry eVolution STREAM XT - very silent light, smooth feeling. Good affordable keyboard with scissor switches.
- stratokaster
- Location: Dublin, Ireland
- Main keyboard: Filco Minila Air
- Main mouse: Contour Unimouse WL / Apple Magic Trackpad 2
- Favorite switch: Alps SKCM Green
- DT Pro Member: -
- Contact:
I concur. The Mitsumi-made white Apple keyboard is definitely the worst keyboard I have ever owned. Mushy and squishy and just downright awful. BTW, I have an old Mitsumi-branded keyboard with tactile buckling rubber sleeve switches and it's miles better than this Apple-branded piece of junk.Muirium wrote: I made the mistake of buying one, sight unseen. They were not cheap (yet). And my first impressions were: whoah, look at that thing, it's so white and clear and shiny! And heavy! But once I had it out the box, it turned into the biggest dirt magnet imaginable. I've seen cream topped trifles with better staying power after a few days.
But the real problem was using it. The case was okay, as there's quite a lot of plastic there (albeit quite the worst choice for transparency), but the feel was dead trout on slimy newspaper. I wanted to like it, but soon enough I hated it so much that I have it to thank for waking me up to keyboards in the first place. I never realised they were important before I got sore hands from one, and a sick stomach whenevr I saw it in daylight.
(Sorry for necroposting
![Rolling Eyes :roll:](./images/smilies/icon_rolleyes.gif)
Last edited by stratokaster on 09 Nov 2015, 18:56, edited 1 time in total.
- seebart
- Offtopicthority Instigator
- Location: Germany
- Main keyboard: Rotation
- Main mouse: Steelseries Sensei
- Favorite switch: IBM capacitive buckling spring
- DT Pro Member: 0061
- Contact:
Any Topre keyboard.Favorite rubber dome keyboard?
![Mr. Green :mrgreen:](./images/smilies/icon_mrgreen.gif)
- seebart
- Offtopicthority Instigator
- Location: Germany
- Main keyboard: Rotation
- Main mouse: Steelseries Sensei
- Favorite switch: IBM capacitive buckling spring
- DT Pro Member: 0061
- Contact:
- XMIT
- [ XMIT ]
- Location: Austin, TX area
- Main keyboard: XMIT Hall Effect
- Main mouse: CST L-Trac Trackball
- Favorite switch: XMIT 60g Tactile Hall Effect
- DT Pro Member: 0093
- Muirium
- µ
- Location: Edinburgh, Scotland
- Main keyboard: HHKB Type-S with Bluetooth by Hasu
- Main mouse: Apple Magic Mouse
- Favorite switch: Gotta Try 'Em All
- DT Pro Member: µ
- keycap
- Location: United States
- Main keyboard: '88 Model M, DFK777 SKCM Blue
- Main mouse: A paperclip and a string
- Favorite switch: Alps SKCM, IBM buckling spring
- DT Pro Member: -
I remember using KeyTronic domes for almost my whole life. Very acceptable dome board. I've also acquired a few flimsy, cheap office keyboards a while ago and one of them just so happened to be a midnight-grey Dell keyboard. The domes weren't too bad at all. The keyboard's construction was horrible, though. Even pressing down on a key made it creak, and the stabilizers were made out of cheap plastic.
- Hypersphere
- Location: USA
- Main keyboard: Silenced & Lubed HHKB (Black)
- Main mouse: Logitech G403
- Favorite switch: Topre 45/55g Silenced; Various Alps; IBM Model F
- DT Pro Member: 0038
Ages ago I had an AST rubber dome keyboard that I rather liked. I recall that it had deep-dish homing keys. Perhaps one influence on my positive memory of this board is that I am partial to brand names that have three letters (AST, HAL, IBM, NEC).
- shreebles
- Finally 60%
- Location: Cologne, Germany
- Main keyboard: FaceW 45g Silent Red /NerD60 MX Red
- Main mouse: Logitech G303 / GPro (home) MX Anywhere 2 (work)
- Favorite switch: Silent Red, Old Browns, Buckling Spring,
- DT Pro Member: 0094
I have a mech at work but have a Cherry G83 / RS 6000 as a backup. In brand new, these feel quite nice, definitely better than the worst mechanical keyboards. But if I actually used it it would probably feel pretty meh after a while.
At least it has full travel and the keycaps have the same profile as Cherry MX keycaps. And a rough texture, unfortunately with laser infills which fade so quickly. I think Cherry has almost ceased making these in favor of more "modern" (=cheap and flat) designs.
At least it has full travel and the keycaps have the same profile as Cherry MX keycaps. And a rough texture, unfortunately with laser infills which fade so quickly. I think Cherry has almost ceased making these in favor of more "modern" (=cheap and flat) designs.
- stratokaster
- Location: Dublin, Ireland
- Main keyboard: Filco Minila Air
- Main mouse: Contour Unimouse WL / Apple Magic Trackpad 2
- Favorite switch: Alps SKCM Green
- DT Pro Member: -
- Contact:
This week I helped a friend of mine with his Mac. He uses Logitech DiNovo Mac Edition, I must say it's really good for a rubber dome board. Looks pretty sweet too.
-
- Location: USA
- Main keyboard: IBM M
- Main mouse: Logitech Trackman Thumb
- Favorite switch: IBM M buckling spring
- DT Pro Member: -
- Contact:
I used one of these early on as a replacement for a Model M for a 486 build back in the early 1990s. While it was no M, it was quite nice. I actually still have it (and the 486) and even have a newer model of the same keyboard with the windows keys. The newer one seems to have less key wobble and more 'snap' in the keys.
Keytronic is still around and all their keyboards come with a lifetime warranty, which is pretty neat imo.
![Cool 8-)](./images/smilies/icon_cool.gif)
-
- DT Pro Member: -
I want to add one more to my previous suggestions: Cherry Evolution Stream XT (G85‑23100EU‑2).
If you were late to the party and are unable to track down an Enermax Aurora Lite or Logitech Ultra-X the G85-23100 is what you want. In fact I prefer it to the easily available Siig Premium Aluminum.
Surprising that Cherry's scissor switch implementation is more satisfying to type on than their MX line!
![Mr. Green :mrgreen:](./images/smilies/icon_mrgreen.gif)
- seebart
- Offtopicthority Instigator
- Location: Germany
- Main keyboard: Rotation
- Main mouse: Steelseries Sensei
- Favorite switch: IBM capacitive buckling spring
- DT Pro Member: 0061
- Contact:
- keycap
- Location: United States
- Main keyboard: '88 Model M, DFK777 SKCM Blue
- Main mouse: A paperclip and a string
- Favorite switch: Alps SKCM, IBM buckling spring
- DT Pro Member: -
My absolute favorite rubber dome keyboard looks very generic and it's not even too old. It's an HP model no. 5187 keyboard. The keys are fairly rattly, the case construction is average, and the keyboard barely weighs anything... but the tactility is nothing short of surprising for a keyboard that looks this mediocre. Very clean, smooth and snappy tactility with no noticeable binding or scratchiness. The keyboard itself isn't even in good condition either, it's quite dusty and has a few yellowed key caps.
I have absolutely no clue why it feels so good. Opened it up and the dome sheet looks average at best, nothing out of the ordinary as for the design of domes. I did find out that the stabilized keys use built-in sliders, but every other key is mounted into a plastic barrel like usual. If the keys weren't as rattly and the overall construction was better, I'd put it ahead of most mechanical keyboards that I've tried.
I have absolutely no clue why it feels so good. Opened it up and the dome sheet looks average at best, nothing out of the ordinary as for the design of domes. I did find out that the stabilized keys use built-in sliders, but every other key is mounted into a plastic barrel like usual. If the keys weren't as rattly and the overall construction was better, I'd put it ahead of most mechanical keyboards that I've tried.
- fohat
- Elder Messenger
- Location: Knoxville, Tennessee, USA
- Main keyboard: Model F 122-key terminal
- Main mouse: Microsoft Optical Mouse
- Favorite switch: Model F Buckling Spring
- DT Pro Member: 0158
Not sure whether that HP came after the merger with Compaq, but I felt that Compaq keyboards from the late-1990s-early-2000s were very nice and I used them for several years after getting an SK-2800 with a Compaq system about the time that XP came out.
- snuci
- Vintage computer guy
- Location: Ontario, Canada
- DT Pro Member: 0131
- Contact:
Haven't seen this thread before. My favourite all around is my Sun Compact 1 keyboard. It's an uncommon tenkeyless version because it came with a Sun Voyager portable computer. It's also in the Smithsonian with the Sun Voyager they have there so "Go Rubberdome!"
- keycap
- Location: United States
- Main keyboard: '88 Model M, DFK777 SKCM Blue
- Main mouse: A paperclip and a string
- Favorite switch: Alps SKCM, IBM buckling spring
- DT Pro Member: -
Definitely came after the merge with Compaq. Its FCC ID dates from around 2005.