Looking to sell some more boards to consolidate my stuffs. This goes for everything: these are old stuffs, I tried my best to describe the condition of each item with my best ability but it is possible that I might miss some wear and tear.
KPT84 with pine white alps : 30 gbp
This is a project of mine that I currently do not need and someone might find some kicks out of this.
Keyboard is KPT84, originally came with alps clone. I replaced the switches with pine white alps, cleaned and wax boiled.
The og cable was cut, so i made a new one. There is one bridging on the pcb. I painted the case in vintage white color.
Keycaps are double shot for the most part, pad print for some uncommon caps such as 1u ctrl, 1u alt. Some yellowing here.
I currently have this keyboard in XT mode and used through my soarer converter, it works fine. However it is at the end a rebuilt keyboard and I have not used it for an extended period of time so it could be janky in some places that I do not know about.
Spoiler:
Looking to sell this board, some yellowing on the case and caps, switches were cleaned and lubed with dry lube, 7.5 to 8 imo, i have not looked into converted it yet, a soarer might do the job
Asking for 170 eur+ shipping
4- Focus FK2000plus - 75GBP: pine white alps, good cond, some deformed caps for unknown reason, does not affect function at all
Spoiler:
1- GH80-1800 - 135 GBP : The start of this project was that i have a g81 case + caps i like to save. It was in ansi layout, so in order to make it iso i have to add some other caps i have around. Some heavy marks on some caps, can be a bother i understand, but the reason i tried to save them was that the main caps are in good condition no shine no yellow. Built with JWK jwick red switches, linear, bottoming out 60g, Filmed and lubed with kryptox 205(on housing) and 105 (on spring). Durock stabs + one cherry stab for the + on the numpad. PCB is GH-1800 by Maartenwut fuly porogrammable + PC plate. The case is a g81 case painted over with metal gun color, to accommodate the addition of the plate it has to be modded. OG double shot caps as mentioned, the remaining ansi caps will be included as well since i have no use of them other wise.
Spoiler:
2- Filco - 50 GBP: with xiangmin switch, in pristine condition when it came to me and has been kept like that ever since. Switches are smooth, a tat heavy for my taste. Use Ps2 protocol
Spoiler:
Price: 45 gbp or $60
Toshiba alps caps, a t1200 module i belive, i bought the module alone so not sure about the whole thing. Good condition caps
1- m0110a - 60 GBP
This has mitsumi standard mechanical switches type 1. Switches are good, this board has been usb converted, even tho the converter is very home made ish XD.
IT came to me without the stabs for the spacebar, missing one cap (up arrow), and the screws for the case. Therefore i had to improvise new stabs wires and inserts using parts from a cherry my keyboard. The spacebar works totally fine. New screws were provided as can be seen from the pic of the bottom. A replacement cap was bought, unfortunately it is off color. Last but not least importance: please see the current layout of the keyboard in the pic below
Spoiler:
2- mck 860 with blue alps - 90GBP
I bought this as the restoration work of someone else. I think he did a decent job of lubing the switches, painting the plate. He sanded the case to rid off the yellow, which i dont really agree with. Cable was worked on the reduce the original length. The keyboard works fine, switches are decent however they are a bit muted and not to my liking. Caps are decently thick but printed. Overall im not using this one much and it is just redundant in my cave.
Spoiler:
G80 - 0427/ 0624 or "That OG NCR XT keyboard" - 150 GBP + shipping
board speaks xt, tested with soarer all keys registered. Be mindful that nav cluster via soarer dont give the right inputs (number instead of nav keys) but the rest works just fine. Converter is not included. One screw was broken, doesnt affect anything tho.
1- Acer kb102a with salmon, DE layout
Price: 85 gbp
I bought chassis, caps, pcb, and plate from another member in DT. I revived this board with SKCM salmon. Swiches were cleaned and lubed on the sliding rails with OKS477. I rate them 7.5. Since buying the chassis second hand, there are some discoloring, chips on the board. Feet and screws were missing, and i was able to find only a few that can be used to screw plastic. All and all, i think those are just minor issues really the board is still solid. Also the caps were not original, no idea what board it was from.
Spoiler:
4- HHKB
Price: 100 gbp
Bought like new condition in box, and and used for like 2 minutes until i put it away ever since. Topre is not for me. 6- Duck viper V3
Dunno if DT is of interest for this, but i have a duck viper V3 built with mauve lubed filmed, fr4 plate + 2 extra plates for sale. OG cherry wob keycaps from a 1800 + space from other set.
Price: 380 gbp with caps, 340 without
1- M0116 with salmon
Price: 75 gbp
Salmon switches, they are in great condition and i lubed the sliding rails of the top housing with a light coat of OKS 477. Since salmon was not lubed to begin with, I think this up the switch a notch. PCB has two bridging, not done by me, came to me that way. Tested and the whole board is working fine except the = on the numpad.
Spoiler:
Og cherry dyesub SAD
Price: 95 gbp
Desc: very good condition set, just a bit dusty
Wyse Wy60 modded with jwk tactile switch - 70 gbp sold
Wyse wy 60 model, came with mx black but they are pretty scratchy, i tried but can't salvage them. I put in new switches, tactile, made by jwk. Very smooth switches with satisfying bump, similar feeling with T1, thockier. You can get the old switches included if you like, but you heard my warning. Board is usb converted, the rest are original.
1- Z150 UK layout, Merlin branded, SKCL green I think 7/10, keyboard untested.
Majority of the caps are dyesub. The ones that are specific to the UK layout are double shot, hence they are yellowed as seen.
Asking for 120 GBP + shipping
1- Custom HHKB style - 250GBP + ship
This keyboard is from an exclusive GB in China, by the maker Revo. The specs:
- Milled polycarb body, aluminum top piece anode in yellow color. No dent or ding on the keyboard.
- Brass weight, this is the first that was produced in the total of 69 keyboards in this GB, hence the weight is numbered 1/69. Bottom of the board is made of steel and has a mirror finish. There is an extra bottom piece with different style (sandblasted). The extra is a bit dirty but will clean up well.
- Alu plate, JWK FFF linear switches, pcb is solder.
- Gasket mount.
- Programable using VIA (pretty easy and I will provide you with the file to config this using via). Underglowing led
NO CAPS are included
SOLD
Last edited by ntv242ver2 on 01 Feb 2023, 16:14, edited 51 times in total.
GLWS nam!
