please do, you will make so much profit as there are a lot of people looking for someone to come up with an ISO PBT set!Ducky Nordic wrote: White ones will take about a month to have as separately sold sets as i mentioned earlier. We might do also with UK markings but at current we do not sell anything in the UK. What we definately can do is blank PBT sets, in black and in white...and maybe even some funky colorcombo
How about shipping a couple extra keys and a key cap puller?Ducky Nordic wrote:Currently the market(or actually consumer awereness) isnt big enough to make to make separate keycap sets for each nordic country.
Funny coincidence that I actually have old spare Steelseries Qck. Thanks for the tip.Ducky Nordic wrote:Yes the bottom material on the wrist rest is not succesful one unfortunately as material is too hard to hold on smooth slippery surface. I suggest cutting few large pieces of pretty thin soft rubber and attaching them on bottom. Can use an old Steelseries Qck mousemat(which is only 3mm) or similar thats about to go to the bin if you have something like that lying around.
You guys are extremely lucky. Hence the mix of white and brown Cherry MX switches will never again be available to anyone else.........that just sux.Ducky Nordic wrote:Tho you wont find tenkeyless G2PRO yet as the Assembly special edition were 1st units made for Nordics (actually 1st units to anywhere). Tenkeyless models with ABS and 3 different PBT variants will arrive within this month.
At current theres not as many resellers for the keycap sets as there are for the keyboards. At the moment the production volumes for keycap sets are low as is the consumer awereness. The keycap sets are and will be available at least from:magnetic wrote:please do, you will make so much profit as there are a lot of people looking for someone to come up with an ISO PBT set!Ducky Nordic wrote: White ones will take about a month to have as separately sold sets as i mentioned earlier. We might do also with UK markings but at current we do not sell anything in the UK. What we definately can do is blank PBT sets, in black and in white...and maybe even some funky colorcombo
p.s. where can i see the black, engraved iso set?
thanks
It would need 5 or more caps to make it proper. At current the production volumes are very low so maybe a bit later.Findecanor wrote:How about shipping a couple extra keys and a key cap puller?Ducky Nordic wrote:Currently the market(or actually consumer awereness) isnt big enough to make to make separate keycap sets for each nordic country.
Norwegian/Danish customers could swap Æ and Ø themselves.
I know that there is at least one rubber dome keyboard that was made this way.
Yes, it was menuhi wrote:Funny coincidence that I actually have old spare Steelseries Qck. Thanks for the tip.Ducky Nordic wrote:Yes the bottom material on the wrist rest is not succesful one unfortunately as material is too hard to hold on smooth slippery surface. I suggest cutting few large pieces of pretty thin soft rubber and attaching them on bottom. Can use an old Steelseries Qck mousemat(which is only 3mm) or similar thats about to go to the bin if you have something like that lying around.
Could it have been that I bought this board from you in the Assembly? Got the S/N 2 one.
...and conrats on acquiring an excellent and rare keyboard. The G2PRO tenkeyless models will range from about 119 to 159 euros depending on what kind of keycaps are on the unit.rich0d wrote:Sweet! I've been after a reasonably priced, non-CMStorm ISO tenkeyless board for a while, any idea on pricing of them?
The european market desesperatly needs blank ISO PBT keycaps !Ducky Nordic wrote:Hiya,dirge wrote:To my knowledge this is the first PBT ISO set.
Can you do UK PBT engraved?
We have already done the black ones. Heres pics from a full ISO PBT set Ducky Black on black enraved:
White ones will take about a month to have as separately sold sets as i mentioned earlier. We might do also with UK markings but at current we do not sell anything in the UK. What we definately can do is blank PBT sets, in black and in white...and maybe even some funky colorcombo
. Yes, we decided to produce some blank ISO PBT 105pcs sets. These sets will be suitable for most brand cherry keyboards as we'll make the Numlck, CapsLck and ScrLck caps without small transparent piece for led light (which would be normally done for Ducky keyboards).Djuzuh wrote:
The european market desesperatly needs blank ISO PBT keycaps !
Please tell us where we can buy a set
Hahadamorgue wrote:You are just trying to make me broke, aren't ya?
Two of the three Swedish stores you mentioned earlier claims they have no info indicating that they will begin to sell these caps. Hopefully they are wrong.
bless youDucky Nordic wrote:Yes, we decided to produce some blank ISO PBT 105pcs sets. These sets will be suitable for most brand cherry keyboards as we'll make the Numlck, CapsLck and ScrLck caps without small transparent piece for led light (which would be normally done for Ducky keyboards).Djuzuh wrote:
The european market desesperatly needs blank ISO PBT keycaps !
Please tell us where we can buy a set
We will produce blank ISO PBT 105pcs sets in black and white. Estimate for availability in stores is about 3 weeks to 1 month.
These will be available at least at a Finnish resellers called Jimms and Verkkokauppa. Their sites are http://www.jimms.fi and http://www.verkkokauppa.com. Both of them do international shipping.
mr_frag wrote:OMFG i was waitning pbt iso keycaps for one year! nice! PBT ISO blanks are posible?
Ducky Nordic wrote: Yes, we decided to produce some blank ISO PBT 105pcs sets. These sets will be suitable for most brand cherry keyboards as we'll make the Numlck, CapsLck and ScrLck caps without small transparent piece for led light (which would be normally done for Ducky keyboards).
We will produce blank ISO PBT 105pcs sets in black and white. Estimate for availability in stores is about 3 weeks to 1 month.
These will be available at least at a Finnish resellers called Jimms and Verkkokauppa. Their sites are http://www.jimms.fi and http://www.verkkokauppa.com. Both of them do international shipping.
Dont have exact dates. This is a small production run so factory will run when they have a small available slot. Also with air freight available date of departure + hubs/arrival can have variations worth days. The total estimate is a month. If sun shines for us it will be fasterdamorgue wrote:Verkkokauppa is the store from which you easiest buy Topre in Sweden. Did you have any mor exact date on when they might carry the PBT's you mentioned?
How thick are the key caps?
Yesmr_frag wrote:OMFG i was waitning pbt iso keycaps for one year! nice! PBT ISO blanks are posible?
+1birabirabärs wrote:If Ducky makes this keyboard with a Rainbow PBT-set i will get a humongous orgasm!!
As far as I know, only the lasered and engraved black ones have been released as of yet.dirge wrote:Anyone got a link for the blank pbt?
http://www.maxfps.se/product_view.aspx?productid=5367magnetic wrote:iso? where?damorgue wrote:As far as I know, only the lasered and engraved black ones have been released as of yet.dirge wrote:Anyone got a link for the blank pbt?
Just to confirm I want to say that Finnish and swedish keyboards has the same layout.damorgue wrote:I thought Finnish was the same layout as Swedish. If so, then yes. I think someone mentioned a couple of addon keys earlier in this thread that ducky might look into. These are Swedish for now it seems.
To give anyone interested some updated info on PBT caps:damorgue wrote:
http://www.maxfps.se/product_view.aspx?productid=5367
http://www.maxfps.se/product_view.aspx?productid=5368
Those are the two that have been released.
I am waiting for the white ones to be released as well before I order. Hopefully we might have word on when/if blanks will also be released and I can perhaps get those as well.
...but the caps will be made eventually. 
