First time I've done a respray. Light wet and dry, then two coats of Rustoleum primer then two coats of Rustoleum Gun Metal. I protected the main keys with 10mm stickers, the space bar stabilizers and kickstand housings with Blutack.
I tried retrobriting the case but it didn't work - it was too far gone, however the space bar did come up ok.
Oh and look after those springs - I've managed to loose one, and there aren't too many keys on a Happy Hacking keyboard that are unused!
Mark.
Resprayed Happy Hacking Keyboard
- urbancamo
- Location: Windermere, UK
- Main keyboard: HHKB PRo 2
- Main mouse: Kensington Pro
- Favorite switch: Topre
- DT Pro Member: -
- Contact:
- Attachments
-
- IMG_20220416_121303.jpg (3.17 MiB) Viewed 1698 times
- urbancamo
- Location: Windermere, UK
- Main keyboard: HHKB PRo 2
- Main mouse: Kensington Pro
- Favorite switch: Topre
- DT Pro Member: -
- Contact:
Found the spring woot! I never seem to be able to do a job like this without taking it apart multiple times.
- wobbled
- Location: USA
- Main keyboard: HHKB PD-KB300 Pro 1
- Main mouse: Logitech MX Master 3
- Favorite switch: Topre
- DT Pro Member: 0192
I'm surprised your retrobrite didn't work, I've gone from a bronzed near-orange Pro 1 to bleached white. Do you have any before pictures?
I've always found those coil springs like to attached to one another - a small magnet is a great way to find & detach them when this happens.
Since you've gone for a grey colour, I'd be intrigued to see what these stickers would look like on there
https://www.aliexpress.com/item/1005001 ... 5f88AGSZrU
Silver could look pretty neat.
I've always found those coil springs like to attached to one another - a small magnet is a great way to find & detach them when this happens.
Since you've gone for a grey colour, I'd be intrigued to see what these stickers would look like on there
https://www.aliexpress.com/item/1005001 ... 5f88AGSZrU
Silver could look pretty neat.
- hellothere
- Location: Mesa, AZ USA
- Main keyboard: Lots
- Main mouse: CST2545W-RC
- Favorite switch: TopreAlpsHallEffectTopreAlpsHallEffectTopreAlps
a. Really nice job on the paint.
b. Oooh. Thanks for the linky. I've made a couple inquiries at a couple places that make nametags and I haven't received any responses.
b. Oooh. Thanks for the linky. I've made a couple inquiries at a couple places that make nametags and I haven't received any responses.
- urbancamo
- Location: Windermere, UK
- Main keyboard: HHKB PRo 2
- Main mouse: Kensington Pro
- Favorite switch: Topre
- DT Pro Member: -
- Contact:
Thanks for the info. To be honest I probably didn't give the retrobrite the best shot, so I'm sure you're right. However I wanted to give the painting a go as it is not permanent a solution and the metallic gun metal does look great!wobbled wrote: ↑17 Apr 2022, 00:27I'm surprised your retrobrite didn't work, I've gone from a bronzed near-orange Pro 1 to bleached white. Do you have any before pictures?
I've always found those coil springs like to attached to one another - a small magnet is a great way to find & detach them when this happens.
Since you've gone for a grey colour, I'd be intrigued to see what these stickers would look like on there
https://www.aliexpress.com/item/1005001 ... 5f88AGSZrU
Silver could look pretty neat.