Hi all,
I have a M0110A that I'd like to use. Searching around I've found this https://github.com/tmk/tmk_keyboard/tre ... /m0110_usb and Hasu's related posts, but I'm still really unclear and what I need to do on a hardware level to rig up a converter. I've used a Teensy and TMK before, but a more in-depth guide would help me out a bunch.
M0110A converter?
-
seebart
- Offtopicthority Instigator
- Location: Germany
- Main keyboard: Rotation
- Main mouse: Steelseries Sensei
- Favorite switch: IBM capacitive buckling spring
- DT Pro Member: 0061
- Contact:
Hello dothedog and welcome to DT!
Hasu's related posts are pretty clear, if you've used a Teensy and TMK before not sure what you need?
workshop-f7/tmk-keyboard-firmware-colle ... ?hilit=tmk
https://github.com/tmk/tmk_keyboard/wiki
Hasu's related posts are pretty clear, if you've used a Teensy and TMK before not sure what you need?
workshop-f7/tmk-keyboard-firmware-colle ... ?hilit=tmk
https://github.com/tmk/tmk_keyboard/wiki
-
dothedog
- Location: San Francisco
- Main mouse: g502
- Favorite switch: Brown ALPS
- DT Pro Member: -
Hi seebart. Sorry for not being clear. I've one done a simple project with a teensy, just soldering rows and columns and getting it to work. So I'm pretty much still a newb. What exactly do I solder to the teensy?