Cherry MX and Matias switches

[7bit]

Because prices hare higher and because I need to pay for the switches before they are reserved for us, I need 100% payment for all preorders.

I will send out invoices with 100% prices instead of 50%.

Thanks!

[matt3o]

is this still valid?

Code: Select all

Order-ID      |Stock| Price|Cur|Product code
MXBROWN       |   50|  0.65|EUR|MX1A-G1NN
MXDARKGREY    |    3|  0.65|EUR|MX1A-21NN
MXGREEN       |    6|  0.65|EUR|MX1A-F1NN
MXGREY        |   11|  0.65|EUR|MX1A-D1NN
MXRED         | >500|  0.55|EUR|MX1A-L1NN

[7bit]

Code: Select all

Order-ID      |Stock| Price|Cur|Product code
MXBROWN       |   50|  0.65|EUR|MX1A-G1NN
MXDARKGREY    |    3|  0.65|EUR|MX1A-21NN
MXGREEN       |    6|  0.65|EUR|MX1A-F1NN
MXGREY        |   11|  0.65|EUR|MX1A-D1NN
MXRED         | >500|  0.55|EUR|MX1A-L1NN

Code: Select all

Order-ID      |Stock| Price|Cur|Product code
MXDARKGREY/NW |   32|  0.65|EUR|MX1A-21NW
MXGREEN/NW    |   35|  0.65|EUR|MX1A-F1NW
MXGREY/NW     |   55|  0.65|EUR|MX1A-D1NW
MXLOCK/NW     |   18|  2.90|EUR|MX1A-31NW
MXRED/NW      |  123|  0.65|EUR|MX1A-L1NW

Seems to be still valid.

[matt3o]

okay time to hit some of your stocks... I need some spares... is there a MOQ?

[Dubsgalore]

7Bit Should we order for the GH60 Groupbuy via PM or an Order Form?

[matt3o]

not receiving confirmation emails from CherryMX... hope I did everything right

[7bit]

Now it should work again.

GH60: I've set something up to make sure everybody can order and let the stuff be shipped to the GH60 distributor.

Just add a line

GH60

to your order and it should work.

[matt3o]

paypal money request just arrived (and already paid). thanks...

what about stabilizer?

[7bit]

I don't have any stabilisers.

[matt3o]

expand your business!

oh right... you are the anti-stabilizer guy!

[pix3l_fodder]

Just got an email through and my order has doubled in price what's going on there? I preordered to save money but its cost me double! Is that a mistake?

[7bit]

The previous price was the 50% pre-payment. Now, I need to get 100% because of the higher MOQ to pay for the pre-order.

If you look at you old invoice you find lines looking like this:

MXBLUEP | 73|preorder| 0.27|EUR|MX1A-E1NN (Preorder price: 0.54EUR)

[pix3l_fodder]

That's annoying, it's wasn't very clear now ill be charged twice by PayPal, I would have made the payment in one lump sum. Ill send payment asap

[7bit]

Sorry, but 0.27 EUR would be far less than what a switch costs even with the old price.

Also, PayPal fees are 4% no matter how many payments you make.

[pix3l_fodder]

Sorry I worked it out incorrectly, think there's a conversion fee too but it doesn't matter now. I just thought I had paid in full through following instructions I didn't work anything out ahead of time. Lesson learnt I guess. I still do appreciate your services!

[mashby]

Paid.

[mbreslin]

I have paid twice but combined should be enough, please let me know if everything is ok?

Thanks!

[vardhana]

Dear 7bit

I orderd switches for GH60.
I wrote with reference to the following examples written in http://geekhack.org/index.php?topic=414 ... #msg828904.

MXBLUEP 61
GH60
your@email_address.com

I received a invoice mail.

Dear vardhana,

here is your invoice:

I need your shipping address!!!

Please send a message to user 'CherryMX' @ Deskthority
in the following form:

(OMISSION)

Order-ID |Description |Price|Qty|Pcs|Total
GH60 |GH60 order | 0.00| 1| 0| 0.00
(Switches I ordered are following...)

Is this OK?
Don't I need to send my shipping address?

[7bit]

I've seen that some of you got that message and that the shipping addresses where not set to "Order will be shipped to the GH60 distributor.".

I can't reproduce that error for the moment, so just ignore it..

I will ship all orders which contain the GH60 kit to the GH60 distributors, no matter what is in the address field.

[mbreslin]

I paid twice because for some reason the invoice came with only half my switches (which I paid) then later the full invoice with all of the switches. So I subtracted my original payment from the new total and sent the remainder. I hope this is ok.

[vardhana]

Thanks.
I'll pay asap.

[Acanthophis]

Oh boy, I received 18 payments in the last 31 hours.
Damn this GH60 GB...

Update is coming in a bit.

[7bit]

Looks more like 7bit, with one bit being an hour.

[kekstee]

Damn, the GH60 gb is nearing it's deadline and I still can't decide which switches I should get. Boring Browns like all my keyboards or something fancy?

[mbreslin]

one set reds one set browns and 2 gh60's for me.

[Acanthophis]

Payment/"shipping" update

Payments from matt3o, mm87, abc, maasto, mbreslin, mashby, FuckingUsername, samwisekoi, HoffmanMyster, n0rvig, skkhai, Bimgao, pix3l_fodder, Affect656, vardhana, and Muffet have been received and marked as shipped for Paypal purposes (to keep them from locking up the PP account). Invoices may or may not reflect the payments yet. Keep checking this thread for the actual ship date(s), or spam this thread/7bit via PM the message "WHERE ARE MY SWITCHES, DID YOU SEND THEM YET." This only includes payments to me via Paypal. Note that the address on your Paypal notifications/notes are not necessarily the addresses 7bit will ship your switches to, he ships to the address on your invoice.

[Play3r]

Hi Guys, pretty new to all this group buy stuff. What exactly do I need to do to order 100 green switches?

[7bit]

If you want plate mountable switches (without the 2 extra pins), then just order (ie send a message to CherryMX):
MXGREENP 100
your e-mail address
ADDRESS
your shipping address

or
MXGREENP/NW 100
if you want the PCB-mount variant.

The P means pre-order. They are not in stock and will be delivered in September or more likely in October.

[huttala]

Anyone else experiencing problems with MX White switches?

Like 50% of my switches barely clicks at all. I LOVE the switches that does click, but this makes the board unusable since some are tactile and click while the other switches don't. Really annoying.

I've tried to change the stem from a clicking switch to a switch that did not click and it seems like it's the stems that are failing because when I changed the stem the non clicking switch started to click.

It would be awesome with some feedback regarding this problem since I really, really like the working switches.

[Jmneuv]

The observations we discussed in the "ergo white" thread suggest that the adjustment of the click (or the soft click) comes mainly from a tiny dab of grease inside the "clicky slider" (the black part). Variation in amount and distribution might be producing the different sounding switches.
I imagine they break in and even out some over time.
Or you could clear the grease, or re-lube them more meticulously.