[orders closed] 2x unit Plate mount Cherry stabs
- HzFaq
- Location: Windsor, UK
- Main keyboard: Phantom
- Main mouse: CST L-Trac
- Favorite switch: MX Clears
- DT Pro Member: -
Costars are a bit of a pain in the arse to be honest, you have to make a bend to go around the switch and then make the hooks on the end as well so there are about 8 bends that all have to be in line and the right depth etc. Cherry's are easy as there are only 2 bends, plus I already had similar sized wires to use as templates which I don't for Costar. Also, lastly, the wire I used is soft as balls which is fine for Cherry stabs as they sit under the switch and don't take nearly as much abuse as the Costar ones do when changing caps so are much less likely to warp or bend.
Short answer is no, sorry! I think WASD sell them though if you can get a few others together you could do a Costar mini GB.
Short answer is no, sorry! I think WASD sell them though if you can get a few others together you could do a Costar mini GB.
- scottc
- ☃
- Location: Remote locations in Europe
- Main keyboard: GH60-HASRO 62g Nixies, HHKB Pro1 HS, Novatouch
- Main mouse: Steelseries Rival 300
- Favorite switch: Nixdorf 'Soft Touch' MX Black
- DT Pro Member: -
Thanks for the explanation! Unfortunately, we've already got 6.25U spacebar stabs by Costar - that's all WASD has. I naively bought Costar stabs a while back without realising that it probably wouldn't fit my original 6U Cherry spacebar...
Thanks anyway.
Thanks anyway.
- kbdfr
- The Tiproman
- Location: Berlin, Germany
- Main keyboard: Tipro MID-QM-128A + two Tipro matrix modules
- Main mouse: Contour Rollermouse Pro
- Favorite switch: Cherry black
- DT Pro Member: 0010
- rindorbrot
- Location: Bavaria, Germany
- Main keyboard: Phantom, GON NerD 2.0 TKL
- Main mouse: Zowie ZA11
- Favorite switch: MX Ergo-Clear, Nixdorf Soft-Touch
- DT Pro Member: 0029
lol!
- Broadmonkey
- Fancy Rank
- Location: Denmark
- Main keyboard: Whitefox
- Main mouse: Zowie FK2
- Favorite switch: MX Black
- DT Pro Member: -
- Contact:
I'd still really like to know who that person is and if he/she is active on any forum.
- kbdfr
- The Tiproman
- Location: Berlin, Germany
- Main keyboard: Tipro MID-QM-128A + two Tipro matrix modules
- Main mouse: Contour Rollermouse Pro
- Favorite switch: Cherry black
- DT Pro Member: 0010
I just cannot imagine this is not the case.Broadmonkey wrote:I'd still really like to know who that person is and if he/she is active on any forum.
HzFaq wrote:If anyone can find them, kbdfr can .
Of course it makes me curious,
but even if I did find out, I wouldn't tell who it is.
I would just say that I know
-
- Location: Lithuania
- Main keyboard: MJ2 TKL
- Main mouse: Logitech lx5
- Favorite switch: MX brown
- DT Pro Member: -
I received at the same time everybody else did. Thanks again!HzFaq wrote:Has everyone got their packages? I know some have replied in the thread already, I just want to make sure everyone has what they paid for.
- HzFaq
- Location: Windsor, UK
- Main keyboard: Phantom
- Main mouse: CST L-Trac
- Favorite switch: MX Clears
- DT Pro Member: -
Just as a quick thing, I do have limited leftovers (less than 15 sets at this point) but I'm moving house next week so won't be able to sell any on for a while. Getting rid of the extra's is on my to do list though, just not for the next couple of weeks .
-
- Location: London, UK
- DT Pro Member: -
Can I secure 8 sets of them pls? I'm in London UK and I can see you're from Slough... I'm not in a hurry for them.