GeekHack Custom Keyboard
- webwit
- Wild Duck
- Location: The Netherlands
- Main keyboard: Model F62
- Favorite switch: IBM beam spring
- DT Pro Member: 0000
- Contact:
Look, geekhack already responded with a new t-shirt
- Moogle Stiltzkin
- Main keyboard: Cherry G80-1295 HAU NKRO Cherry Mx Black
- Main mouse: Logitech G500
- Favorite switch: Cherry Mx Brown
- DT Pro Member: -
hate to point out the obvious here, but this is deskthority forum.
So maybe .... a deskthority keyboard would be more appropriate over here
So maybe .... a deskthority keyboard would be more appropriate over here
- webwit
- Wild Duck
- Location: The Netherlands
- Main keyboard: Model F62
- Favorite switch: IBM beam spring
- DT Pro Member: 0000
- Contact:
We're not even 3 weeks old and we're excused. I think itlnstln and me are on the same line here. The (vintage) geekhack keyboard was a Siig minitouch with XM switches and some geekhack caps, you didn't hear people complain. People will buy a keyboard with simple flairs, from a name and community they know and are part of.
- sixty
- Gasbag Guru
- Main keyboard: DKSaver
- Favorite switch: Cherry MX Black
- DT Pro Member: 0060
Wait a bit for the Poker to settle. I know that one will be customizable and available for OEM. If you want, I'll hook you up with the according contact and info.keyboardlover wrote:I never gave a shit about the folks who complained in the thread though. I gave a shit about the 90+ people on board. If I could find a distributor to do it. I'd go the pre order route.
Still don't get why anyone would want a Ducky with a lame forum's nameplate on it. So GH in no way got owned. Ducky is still sucky.
As for the topic of the OCN Ducky. I am not really very impressed, but its a nice touch. Looks like most on OCN are very happy about it. We are just elitist bastards, so we are hardly impressed.
-
- Location: San Antonio, TX
- Main keyboard: Noppoo Choc Mini
- Favorite switch: Cherry Brown
- DT Pro Member: -
That will be a great GH keyboard.sixty wrote:Wait a bit for the Poker to settle. I know that one will be customizable and available for OEM. If you want, I'll hook you up with the according contact and info.
As for the topic of the OCN Ducky. I am not really very impressed, but its a nice touch. Looks like most on OCN are very happy about it. We are just elitist bastards, so we are hardly impressed.
KBL, if you want to go the Poker route, I am more than willing to help out.
- webwit
- Wild Duck
- Location: The Netherlands
- Main keyboard: Model F62
- Favorite switch: IBM beam spring
- DT Pro Member: 0000
- Contact:
200 keyboards per pallet.
- webwit
- Wild Duck
- Location: The Netherlands
- Main keyboard: Model F62
- Favorite switch: IBM beam spring
- DT Pro Member: 0000
- Contact:
Btw, the KBC poker will be available in all four switch types, but lead time of MX reds is 12-14 weeks. PBT and POM keycap options will be sold separately.
- lootbag
- Location: Hong Kong
- Main keyboard: HHKB, Duck Viper
- Main mouse: Slimblade, G502
- DT Pro Member: -
- Contact:
I am sure those will all be spoken for with no problem.webwit wrote:200 keyboards per pallet.
I would buy a few myself
- webwit
- Wild Duck
- Location: The Netherlands
- Main keyboard: Model F62
- Favorite switch: IBM beam spring
- DT Pro Member: 0000
- Contact:
I think those are the manufacturers specs, of which KBC was a customer? I think this also because of the photos (not shown here) where something (a logo probably) was erased.
- keyboardlover
- Location: USA, Greatest Country in the World.
- Main keyboard: Cherry G80-3494 Modded (home)/Realforce 87U (work)
- Main mouse: Handshoe Ergonomic Mouse
- Favorite switch: Cherry Ergo Lite Clears
- DT Pro Member: -
I like this idea, but 200 keyboards is a LOT for me to handle by myself...
- sixty
- Gasbag Guru
- Main keyboard: DKSaver
- Favorite switch: Cherry MX Black
- DT Pro Member: 0060
Just collect payments in advance. That is the only way to do such a project, imo. Collect payments, tell them "it will take XX months or weeks, please be aware of that guys" and then see what happens. The actual order required might be lower too.
- keyboardlover
- Location: USA, Greatest Country in the World.
- Main keyboard: Cherry G80-3494 Modded (home)/Realforce 87U (work)
- Main mouse: Handshoe Ergonomic Mouse
- Favorite switch: Cherry Ergo Lite Clears
- DT Pro Member: -
Physically too though. Won't I have to get 200 keyboards delivered to my home and then ship them all? The thought of all that work is like "whoa".
- webwit
- Wild Duck
- Location: The Netherlands
- Main keyboard: Model F62
- Favorite switch: IBM beam spring
- DT Pro Member: 0000
- Contact:
Not the only way to do it. OCN announced them and they were available. And they didn't "whoa" at the thought of it all. Where is the troll smiley?
- keyboardlover
- Location: USA, Greatest Country in the World.
- Main keyboard: Cherry G80-3494 Modded (home)/Realforce 87U (work)
- Main mouse: Handshoe Ergonomic Mouse
- Favorite switch: Cherry Ergo Lite Clears
- DT Pro Member: -
Yea...that'd be nice. If we go this route, since the idea came from DKT I say it's officially a "DKT" keyboard. Any objections?
Yea but you already OWN 200+ keyboards! (easy for you to say).webwit wrote:Not the only way to do it. OCN announced them and they were available. And they didn't "whoa" at the thought of it all. Where is the troll smiley?
Last edited by keyboardlover on 18 Feb 2011, 18:52, edited 1 time in total.
- sixty
- Gasbag Guru
- Main keyboard: DKSaver
- Favorite switch: Cherry MX Black
- DT Pro Member: 0060
I already sent a mail to KBC a few days ago to see what the further OEM options are. I don't think we can pull of a 200 piece order here, at geekhack you probably can. Depends on how many we actually would have to order.
I already know some changes I would make to the FCN layer... and there it would all begin again.. some people would likely not agree with my layout and so on.
Damn, custom keyboards are such work intensive business. Need a dictator.
I already know some changes I would make to the FCN layer... and there it would all begin again.. some people would likely not agree with my layout and so on.
Damn, custom keyboards are such work intensive business. Need a dictator.
- turbocharged
- Main keyboard: Deck Legend Fire
- Main mouse: Mionix Naos 5000
- Favorite switch: Cherry MX Black
- DT Pro Member: -
I would definitely be down for a custom spec'd kbc poker with cherry reds instead of the tenkeyless...lead time is fine...especially if it actually gets made.
Geekhack/deskthority collaboration?
Geekhack/deskthority collaboration?
- laden3
- Main keyboard: Desko
- Main mouse: SideWinder X8...
- Favorite switch: Buckling Springs
- DT Pro Member: -
Where is deskthority.netwebwit wrote:Thanks for the info mass! Much appreciated. Those OTD keyboards are the best Cherry/Alps keyboards money can buy. I illustrated your story earlier in this picture..
- daedalus
- Buckler Of Springs
- Location: Ireland
- Main keyboard: Model M SSK (home) HHKB Pro 2 (work)
- Main mouse: CST Lasertrack, Logitech MX Master
- Favorite switch: Buckling Spring, Beam Spring
- DT Pro Member: 0087
The problem with a custom keyboard is making something sufficiently unique such that people will give a shit. No one is going to want a Costar board with a Geekhack logo for the simple reason that everyone either has such a keyboard, or is not interested in the ones currently available. didjamatic's idea with the Minitouch with special keycaps was quite clever in that it offered the "Merchandise" aspect with something that was quite unique and interesting.
- Minskleip
- Location: Norway
- Main keyboard: HHKB Pro 2
- Main mouse: CM Sentinel Storm
- Favorite switch: Buckling spring
- DT Pro Member: -
Arrows on ESDF?sixty wrote:I already know some changes I would make to the FCN layer... and there it would all begin again.. some people would likely not agree with my layout and so on.
- sixty
- Gasbag Guru
- Main keyboard: DKSaver
- Favorite switch: Cherry MX Black
- DT Pro Member: 0060
Nope, but I would offer for that option via dipswitch. (I should also include a dipswitch that makes every key type "RIPSTER".. he loves dip switches. A dedicated one would make him drool!)
Anyway, I would probably change fn+space to backspace, and fn+backspace to del.
Also I would turn capslock into the FN key.
Anyway, I would probably change fn+space to backspace, and fn+backspace to del.
Also I would turn capslock into the FN key.
- Minskleip
- Location: Norway
- Main keyboard: HHKB Pro 2
- Main mouse: CM Sentinel Storm
- Favorite switch: Buckling spring
- DT Pro Member: -
Fn+space to backspace is a good idea. I tried it with autohotkey for a time, but never used it. Having backspace and del on the same key is also necessary. Isn't it like that on the one you've got?
Edit: just remembered why I never used Fn+ space for backspace. I also made shift + space backspace, so I usually backspaced instead of spaced. Bad idea.
Edit: just remembered why I never used Fn+ space for backspace. I also made shift + space backspace, so I usually backspaced instead of spaced. Bad idea.