Phantom Custom Keyboard Group Buy (CLOSED)

[trax]

We would like to close this Phantom group buy by January 31st. Please get your orders in now. 7bit is updating the price list and will send new invoices to all buyers soon. Thanks.

Before it closes ye?, ive might have fucked up a few things.


Also, will that dark blue case be available??

[litster]

one of the acrylic cases? I had a separate group buy for acrylic cases, but I have enough buyers for it now. If the first one is successful, I might do another one.

[trax]

one of the acrylic cases? I had a separate group buy for acrylic cases, but I have enough buyers for it now. If the first one is successful, I might do another one.

Wait; sending CASE (or watever it is) to phantom didnt add me to the groupbuy

[7bit]

There was the discussion if we could get Filco cases, but somehow this failed.

I've removed the cases from the list.

[trax]

I saw somewhere that CASE was for the arcylic one...
Lister; could you send me or someone else the blueprints of ur design? And sell us the screws, etc.

[litster]

I tried to put on a marketing hat, and see what feature list I could come up with. Some of the features of Phantom are new since we started the project.

• Supports vintage Cherry double shot, laser, and dye sub keycaps
  • 1.5x Ctrl and Alt vintage Cherry keycaps (PHANSI and PHISO plate options)
  • With 1.5x modifiers, you can also use Cherry’s 7x spacebars
  • Supports centered-stem and offset-stem Capslock (also from vintage Cherry Keyboards)
  • Also support modern keyboard layout with 1.25x Ctrl and Alt modifiers (PHANSIWIN and PHISOWIN plate options)
• Supports both Costar and Cherry stabilizers
• Supports in-switch LED at Capslock and Scroll Lock locations, as well as Filco style LED locations between PrintScrn-ScrollLock-Break and Insert-Home-PageUp
• Plate design allows Cherry MX switch top removal without de-soldering the switch first
  • Perfect for easy switch lubing, repair, or modding
  • Excluding switches with in-switch LED
• Supports 5 extra keys between 6-pack and arrow keys (case modification required)
• Supports 6KRO over USB with current Teensy firmware
  • potentially NKRO over USB in the future with new Teensy firmware
• All keys can be remapped via firmware source code changes (currently a recompile of source is required)
• LED brightness adjustable in firmware source code
• Fits inside Filco Tenkeyless cases
  • PLU cases could also work
• Community support on Geekhack.org and Deskthority.net

Am I missing anything?

[litster]

A new invoice has been sent to your email address. You should be getting it very shortly if you haven't received it already. If you don't receive it later today, please check that you did include an email address in your order PM to PHANTOM. If you didn't, please PM PHANTOM with your email address in the message body. If you did include your email address in your order but don't receive your invoice later today, please let me know.

In the invoice, there is instruction to submit your snail mail mailing address for shipment. Please follow the instruction to submit your mailing address.

Please also double check your ordered items. Thanks.

[hoggy]

Sent.

[trax]

I entered PHANSIWIN 1
But actually want ANSI 125 ..
Ctrl - Win - Alt - Space - Alt Gr - Fn - Ctrl

[7bit]

I entered PHANSIWIN 1
But actually want ANSI 125 ..
Ctrl - Win - Alt - Space - Alt Gr - Fn - Ctrl

^^^What should that be?

2*(1.25*3)+x==15 => x==15-2*(1.25*3)==7.50

You should order:
PHANSIWIN 0
PHANSI 1

[trax]

I entered PHANSIWIN 1
But actually want ANSI 150..
Ctrl - Win - Alt - Space - Alt Gr - Fn - Ctrl

^^^What should that be?

2*(1.25*3)+x==15 => x==15-2*(1.25*3)==7.50

You should order:
PHANSIWIN 0
PHANSI 1

I ment 150, like the PHISO.

So 3 keys at each side...
Thats possible yea?

[mintberryminuscrunch]

wow quite a price increase for the pcbs. shouldn't it have gotten cheaper at the current amount of orders

[7bit]

I entered PHANSIWIN 1
But actually want ANSI 150..
Ctrl - Win - Alt - Space - Alt Gr - Fn - Ctrl

^^^What should that be?

2*(1.25*3)+x==15 => x==15-2*(1.25*3)==7.50

You should order:
PHANSIWIN 0
PHANSI 1

I ment 150, like the PHISO.

So 3 keys at each side...
Thats possible yea?

^^^This?


^^^This? (You can add switches to all the gaps including the cursur-section on the right.)

[yench]

concerning the kits

Code: Select all

PHANSICLEARKIT 	1	150	Teensy/PCB/ANSI plate/MX clear with stabs 

i already asked this back in november, just want to make sure this is still correct:

These are complete kits to build your own keyboard, except for the case and key caps!

[trax]

Yes the second one..

[litster]

wow quite a price increase for the pcbs. shouldn't it have gotten cheaper at the current amount of orders

Sorry about not able to lower the PCB pricing. It is actually the same price as the original invoice we sent out. We are not getting much discount at all beyond 30 pieces. And we need to include setup fees, shipping from China to distributors, and the initial test PCBs we had to make to verify the design, which were at much higher price.

[blainchen]

Hey litster, sorry for that (silly) question:
I will need several Costar stabilizers for a project, any info which message needs to be sent to PHANTOM?

[litster]

Do you need 6.25x stabilizers or 7x stabilizers?

[blainchen]

16* 2U and 4* 7U

But I could bend new wires for them, so the size doesn't matter.
The cheaper, the better

[7bit]

Hey litster, sorry for that (silly) question:
I will need several Costar stabilizers for a project, any info which message needs to be sent to PHANTOM?

Here is the link to the pricelist:
http://deskthority.net/wiki/Phantom#Pricelist

[blainchen]

Wohoo! Thanks!
Just putting together a small order

EDIT:
Commands are the same as 7bit_R4?

[7bit]

Wohoo! Thanks!
Just putting together a small order

EDIT:
Commands are the same as 7bit_R4?

It is a slightly older version of the Round 4 script, but is more or less the same.

CLEARALL clears the order and your e-mail address should be in a single line and all that.

[Findecanor]

litster, do you think that you could bend me a 6 unit stabilizer? Not 6.25 units, 6 units, for my Realforce 88U-like layout, please.

[Ekaros]

Wohoo! Thanks!
Just putting together a small order

EDIT:
Commands are the same as 7bit_R4?

It is a slightly older version of the Round 4 script, but is more or less the same.

CLEARALL clears the order and your e-mail address should be in a single line and all that.

So CLEARALL doesn't add all clears in order? ;D What about REDALL, BLUEALL and BLACKALL?

[trax]

I did
CLEARALL
EMAIL*

nothing...


BTW, Any news on the case metrics lister?
Ill run a non-profit case buy (probably metal)

[litster]

16* 2U and 4* 7U

But I could bend new wires for them, so the size doesn't matter.
The cheaper, the better

For 2U and 6.25U, they are not made by me, so you can order what you want. But for 7U I will be bending the stabilizer bars myself. It looks like I will be bending 30 to 40 7x stabilizer bars. My fingers are going to hurt.

litster, do you think that you could bend me a 6 unit stabilizer? Not 6.25 units, 6 units, for my Realforce 88U-like layout, please.

I can probably do it. But I don't have a 6x stabilizer bar in front of me, so I don't know how accurate it will be.

[litster]

BTW, Any news on the case metrics lister?
Ill run a non-profit case buy (probably metal)

I am not releasing my design to the public. Sorry.

[trax]

BTW, Any news on the case metrics lister?
Ill run a non-profit case buy (probably metal)

I am not releasing my design to the public. Sorry.

not really looking for design but just the sizes etc.
Oh well, Ill just look at the filco then?

[litster]

double post

[litster]

Added higher res picture of the front and back of PCB to the first post. It is shrunk down to 1/16 of its original size, but it is still pretty high res It is pretty amazing to look at, in that it can support so many variations. Look at all the holes...