IBM 3276 Data Entry Keyboard
- chzel
- Location: Athens, Greece
- Main keyboard: Phantom
- Main mouse: Mionix Avior 7000
- Favorite switch: Beamspring, BS, Vintage Blacks.
- DT Pro Member: 0086
Thanks to xwhatsit, these are readily convertible to USB with full customisation of keymaps. If you like tactile clicky switches, beamsprings are (in my opinion, and for many others) better than anything out there.
Really worth the cost and effort to restore.
Really worth the cost and effort to restore.
- zslane
- Location: Los Angeles, California, USA
- Main keyboard: RealForce RGB
- Main mouse: Basic Microsoft USB mouse
- Favorite switch: Topre
- DT Pro Member: -
My understanding is that the "click" of a beamspring switch is relatively modest and understated, almost a suggestion of a click rather than the cacophanous mess that is buckling spring. Would that be accurate?
- chzel
- Location: Athens, Greece
- Main keyboard: Phantom
- Main mouse: Mionix Avior 7000
- Favorite switch: Beamspring, BS, Vintage Blacks.
- DT Pro Member: 0086
It's a very "clean" and crisp click, it is from the flyplate hitting its stop, and upon release it hits the PCB. It's not understated or muted in any way. It's loud and clear. The sandwich and the case act like the body of a guitar amplifying the sound. No ring, no ping, nothing.
And the tactile event is marvellous. There is resistance building up and at a certain point it collapses and resistance is removed except for a fraction caused by the outer spring. It's very definitive and while the feel is a bit heavy it's not tiring (provided you have trained on BS before!).
And the tactile event is marvellous. There is resistance building up and at a certain point it collapses and resistance is removed except for a fraction caused by the outer spring. It's very definitive and while the feel is a bit heavy it's not tiring (provided you have trained on BS before!).
- y11971alex
- Location: Toronto, ON
- Main keyboard: MacBook Air
- Main mouse: Microsoft Sculpt Comfort
- Favorite switch: buckling springs
- DT Pro Member: 0172
I'd like to have one, please!
2. there are beam spring switch testers found on eBay.
3. there's not much residual echo in the case, but the click is very clear and prominent, especially if you have the solenoid operational. It's not the metal-on-plastic sound that buckling springs make with their barrels. In a way, it's softer, but unmistakable just the same. Its onomatopoeia would be a "pop" sound, rather than the "ping" of a Model F.
1. find a soda can and push on its wall... that's essentially how the beam spring works and what sound it makes.zslane wrote: ↑My understanding is that the "click" of a beamspring switch is relatively modest and understated, almost a suggestion of a click rather than the cacophanous mess that is buckling spring. Would that be accurate?
2. there are beam spring switch testers found on eBay.
3. there's not much residual echo in the case, but the click is very clear and prominent, especially if you have the solenoid operational. It's not the metal-on-plastic sound that buckling springs make with their barrels. In a way, it's softer, but unmistakable just the same. Its onomatopoeia would be a "pop" sound, rather than the "ping" of a Model F.
- zslane
- Location: Los Angeles, California, USA
- Main keyboard: RealForce RGB
- Main mouse: Basic Microsoft USB mouse
- Favorite switch: Topre
- DT Pro Member: -
So it's like those old cricket toys.
The general design has always appealed to me, but I think it might be too loud and pronounced of a click for me.
But hey, the keycaps are marvelous for sure.
The general design has always appealed to me, but I think it might be too loud and pronounced of a click for me.
But hey, the keycaps are marvelous for sure.
- seebart
- Offtopicthority Instigator
- Location: Germany
- Main keyboard: Rotation
- Main mouse: Steelseries Sensei
- Favorite switch: IBM capacitive buckling spring
- DT Pro Member: 0061
- Contact:
I did not know you had so much IBM love zslane?!?
- zslane
- Location: Los Angeles, California, USA
- Main keyboard: RealForce RGB
- Main mouse: Basic Microsoft USB mouse
- Favorite switch: Topre
- DT Pro Member: -
I like the pre-PC stuff with the beautiful double-shot sphericals. Seeing them ditch those for relentlessly bland, gray dyesub cylindricals (and on obnoxiously loud, pingy buckling sping switches no less) was like watching the fall of the once great Roman empire...
- photekq
- Cherry Picker
- Location: United Kingdom
- Main keyboard: Various Cherry Corp keyboards
- Main mouse: Razer Deathadder (1st gen)
- Favorite switch: Nixdorf 'Soft Touch' MX Black (55g springs)
- DT Pro Member: -
- Contact:
If there are any left I would love one.
- seebart
- Offtopicthority Instigator
- Location: Germany
- Main keyboard: Rotation
- Main mouse: Steelseries Sensei
- Favorite switch: IBM capacitive buckling spring
- DT Pro Member: 0061
- Contact:
That's all? How modrate of an IBM rant.zslane wrote: ↑I like the pre-PC stuff with the beautiful double-shot sphericals. Seeing them ditch those for relentlessly bland, gray dyesub cylindricals (and on obnoxiously loud, pingy buckling sping switches no less) was like watching the fall of the once great Roman empire...
- Invisius
- Location: USA
- Main keyboard: IBM 3278
- Main mouse: Microsoft Trackball Explorer
- Favorite switch: Beamspring/Fujitsu Magnetic Reed
- DT Pro Member: 0249
Hope this guy comes through for you all, these are just awesome keyboards all around. I think both the switch and case designs are one of the all-time greats from IBM.
I'd buy one of the displays, but it'd probably cost 200+ in shipping to the US. I don't trust DHL with fragile items, either, after they destroyed a 1500 dollar monitor of mine.
I'd buy one of the displays, but it'd probably cost 200+ in shipping to the US. I don't trust DHL with fragile items, either, after they destroyed a 1500 dollar monitor of mine.
-
- Location: United States
- Main keyboard: IBM SSK
- Main mouse: Kensington Orbit
- Favorite switch: Buckling Spring/Thorpe
- DT Pro Member: -
I really hope that the seller goes through with this, and goes down the list in order(!)
- y11971alex
- Location: Toronto, ON
- Main keyboard: MacBook Air
- Main mouse: Microsoft Sculpt Comfort
- Favorite switch: buckling springs
- DT Pro Member: 0172
Please don't. I'm the seventhFirebolt1914 wrote: ↑I really hope that the seller goes through with this, and goes down the list in order(!)
- seebart
- Offtopicthority Instigator
- Location: Germany
- Main keyboard: Rotation
- Main mouse: Steelseries Sensei
- Favorite switch: IBM capacitive buckling spring
- DT Pro Member: 0061
- Contact:
Unfortunately this seems to have been more of a "euphoric offer" by ROUMIAN, just like I had feared. Did any of you PM him? I did, no answer so far.ROUMIAN wrote: ↑Hi to all i have 6 keybords 3276/3278
-
- DT Pro Member: -
Mind sharing some pics?
-
- Location: United states SC
- Main keyboard: IBM Model F 122/AT
- Main mouse: model o
- Favorite switch: Model f buckling spring
i need to try and get one of these that's not insane I want a 327x but man are they just to much