IDENTIFY THE KEYBOARD thread
- TheAdmiralty
- Location: Baltimore, MD
- Main keyboard: IBM Model M (1391401)
- Main mouse: Logitech G602
- Favorite switch: Buckling Spring
- DT Pro Member: -
Spoiler:
Just a rubber dome clone of the Model M/F-122? Price is flat out stupid but I'm curious.
- snufflecat
- Location: Norway
- Main keyboard: Model M
- DT Pro Member: -
Thanks guys!seebart wrote: ↑Mitsumi simplified:snufflecat wrote: ↑Also, what about this switch type? It's on a board from an old receipt/calculator-thingy.
Thanks!
wiki/Mitsumi_simplified
- mike52787
- Alps Aficionado
- Location: South-West Florida
- Main keyboard: G80-5000HAAUS
- Main mouse: Zowie EC1-A
- Favorite switch: Vintage MX Black
- DT Pro Member: 0166
I think I have seen that somewhere, and yeah I think it was a rubberdome. However there are 122 style layout boards also branded "Computer Lab International" which have mx blacks and mx clones.TheAdmiralty wrote: ↑https://www.ebay.com/itm/NEW-NIB-COMPUT ... SwaEhZJNcHSpoiler:
Just a rubber dome clone of the Model M/F-122? Price is flat out stupid but I'm curious.
- Keybug
- Location: Germany
- Main keyboard: so many!
- Main mouse: Logitech G700s; trackballs suck
- Favorite switch: Kailh box royals, trampoline-modded
- DT Pro Member: 0208
Anyone know what this is? Don't think I've ever seen a white escape key on a vintage board like this. Escape also looks almost BTC-style large, but I think here it's due to the angle of the photo. Thanks.
- Attachments
-
- this.jpg (244.89 KiB) Viewed 5480 times
- Keybug
- Location: Germany
- Main keyboard: so many!
- Main mouse: Logitech G700s; trackballs suck
- Favorite switch: Kailh box royals, trampoline-modded
- DT Pro Member: 0208
Turns out it's a Chicony 5162. I guess no one can say for certain what switches it has, just from the label...
- Attachments
-
- image2.JPG (1.35 MiB) Viewed 5465 times
- Myoth
- Location: Strasbourg
- Main keyboard: IDB60
- Main mouse: EC1-A
- Favorite switch: Cap BS
- DT Pro Member: -
I need to get some MX-M8 to see if I can actually use this, it's been so long since I got it and I've yet to do anything about it. That was my first post on DTMyoth wrote: ↑also if the keycaps MX-compatible ?
- snufflecat
- Location: Norway
- Main keyboard: Model M
- DT Pro Member: -
My latest catch. It's got vintage mx blacks, but does anyone know what type of contact this is?
Spoiler:
- seebart
- Offtopicthority Instigator
- Location: Germany
- Main keyboard: Rotation
- Main mouse: Steelseries Sensei
- Favorite switch: IBM capacitive buckling spring
- DT Pro Member: 0061
- Contact:
Looks like an RJ45 jack.
- Daniel Beardsmore
- Location: Hertfordshire, England
- Main keyboard: Filco Majestouch 1 (home)/Poker II backlit (work)
- Main mouse: MS IMO 1.1
- Favorite switch: Probably not whatever I wrote here
- DT Pro Member: -
- Contact:
RJ45 is a wiring arrangement. The jack is 8P8C (8 positions, each position being wired up — 8P6C for example would have the two outer connecting strips absent). And that's nowhere near 8P wide. That appears to be 4P4C. (The best-known 4P wiring arrangement is RJ11 for telephones.)
- seebart
- Offtopicthority Instigator
- Location: Germany
- Main keyboard: Rotation
- Main mouse: Steelseries Sensei
- Favorite switch: IBM capacitive buckling spring
- DT Pro Member: 0061
- Contact:
̶L̶o̶o̶k̶s̶ ̶l̶i̶k̶e̶ ̶a̶n̶ ̶R̶J̶4̶5̶ ̶j̶a̶c̶k̶.̶
Looks like a Beardsmore correction.
Looks like a Beardsmore correction.
It's better to be corrected than to be wrong.
- snufflecat
- Location: Norway
- Main keyboard: Model M
- DT Pro Member: -
I'll see if I can get a better shot later, maybe that helps? And I guess the only way to get this to work is to make your own adapter?Daniel Beardsmore wrote: ↑RJ45 is a wiring arrangement. The jack is 8P8C (8 positions, each position being wired up — 8P6C for example would have the two outer connecting strips absent). And that's nowhere near 8P wide. That appears to be 4P4C. (The best-known 4P wiring arrangement is RJ11 for telephones.)
- purdobol
- Location: Poland
- Main keyboard: Custom
- Main mouse: MS WMO 1.1A
- Favorite switch: Marquardt Butterfly
- DT Pro Member: -
Depends on the protocol it uses. There's a chance for standard AT, which would only require custom cable RJ45 -> PS/2.snufflecat wrote: ↑I'll see if I can get a better shot later, maybe that helps? And I guess the only way to get this to work is to make your own adapter?
If it's something exotic than teensy (or clone) and custom firmware. Photo of the board could help, the connections sometimes are signed.
- Polecat
- Location: Downstream from Silicon Valley
- Main keyboard: Monterey K104 Industrial Gray
- Main mouse: Logitech Optical
- Favorite switch: Early Alps SKCM
- DT Pro Member: -
Looks more like RJ9. RJ45 (8p8c) is the 8 pin connector used for ethernet. RJ11 (6p4c) is the 4 pin used from telephone to wall. RJ9 (4p4c) is the smaller 4 pin used on telephone handsets (and on some terminal keyboards and early Macs). RJ8 (6p6c) is the 6 pin used on some Televideo keyboards. (edit: corrected RJ8 to RJ9 and added xpxc designations per Mr. Beardmore's absolutely correct definitions)seebart wrote: ↑Looks like an RJ45 jack.
Last edited by Polecat on 23 Nov 2017, 18:12, edited 1 time in total.
- Myoth
- Location: Strasbourg
- Main keyboard: IDB60
- Main mouse: EC1-A
- Favorite switch: Cap BS
- DT Pro Member: -
soarer's ceonverter works on this, you can check orihalcon's ebay to buy one
https://www.ebay.com/itm/6FT-Soarers-WY ... SwGYVXACHX
I'm pretty sure this is a Wyse clone after all ...
https://www.ebay.com/itm/6FT-Soarers-WY ... SwGYVXACHX
I'm pretty sure this is a Wyse clone after all ...
- seebart
- Offtopicthority Instigator
- Location: Germany
- Main keyboard: Rotation
- Main mouse: Steelseries Sensei
- Favorite switch: IBM capacitive buckling spring
- DT Pro Member: 0061
- Contact:
Polecat wrote: ↑Looks more like RJ9. RJ45 is the 8 pin connector used for ethernet. RJ11 is the 4 pin used from telephone to wall. RJ9 is the smaller 4 pin used on telephone handsets (and on some terminal keyboards and early Macs). RJ8 is the 6 pin used on some Televideo keyboards. (edit: corrected RJ8 to RJ9)seebart wrote: ↑Looks like an RJ45 jack.
Three posts up vs. double post take your pick.Daniel Beardsmore wrote: ↑RJ45 is a wiring arrangement. The jack is 8P8C (8 positions, each position being wired up — 8P6C for example would have the two outer connecting strips absent). And that's nowhere near 8P wide. That appears to be 4P4C. (The best-known 4P wiring arrangement is RJ11 for telephones.)
-
- Location: Stockholm, Sweden
- DT Pro Member: 0011
Wrong on a few counts. A modular connector is a registered jack only when used for that Registered Jack's particular purpose. There are registered jacks that are not modular connectorsPolecat wrote: ↑Looks more like RJ9. RJ45 is the 8 pin connector used for ethernet. RJ11 is the 4 pin used from telephone to wall. RJ9 is the smaller 4 pin used on telephone handsets (and on some terminal keyboards and early Macs). RJ8 is the 6 pin used on some Televideo keyboards. (edit: corrected RJ8 to RJ9)
It's the same situation as with 6-pin mini-DIN and PS/2. Also, RJ11 uses a 6P2C connector.
#petpeeve
Last edited by Findecanor on 23 Nov 2017, 18:26, edited 1 time in total.
- Polecat
- Location: Downstream from Silicon Valley
- Main keyboard: Monterey K104 Industrial Gray
- Main mouse: Logitech Optical
- Favorite switch: Early Alps SKCM
- DT Pro Member: -
Thanks, edited while being corrected.seebart wrote: ↑Polecat wrote: ↑Looks more like RJ9. RJ45 is the 8 pin connector used for ethernet. RJ11 is the 4 pin used from telephone to wall. RJ9 is the smaller 4 pin used on telephone handsets (and on some terminal keyboards and early Macs). RJ8 is the 6 pin used on some Televideo keyboards. (edit: corrected RJ8 to RJ9)seebart wrote: ↑Looks like an RJ45 jack.Three posts up vs. double post take your pick.Daniel Beardsmore wrote: ↑RJ45 is a wiring arrangement. The jack is 8P8C (8 positions, each position being wired up — 8P6C for example would have the two outer connecting strips absent). And that's nowhere near 8P wide. That appears to be 4P4C. (The best-known 4P wiring arrangement is RJ11 for telephones.)
Better to be safe and sorry.
- seebart
- Offtopicthority Instigator
- Location: Germany
- Main keyboard: Rotation
- Main mouse: Steelseries Sensei
- Favorite switch: IBM capacitive buckling spring
- DT Pro Member: 0061
- Contact:
Relax. Not my correction anyway. The correction of the correction was...correct.Polecat wrote: ↑Better to be safe and sorry.
- Polecat
- Location: Downstream from Silicon Valley
- Main keyboard: Monterey K104 Industrial Gray
- Main mouse: Logitech Optical
- Favorite switch: Early Alps SKCM
- DT Pro Member: -
If I was any more relaxed I'd be gulping down tall ones. It's only 9 am here, but it must be noon somewhere in the world? Love it that I can be correctly corrected, learn something new, and relearn something I had forgotten over thirty years ago all at the same time.
- seebart
- Offtopicthority Instigator
- Location: Germany
- Main keyboard: Rotation
- Main mouse: Steelseries Sensei
- Favorite switch: IBM capacitive buckling spring
- DT Pro Member: 0061
- Contact:
7:14 PMPolecat wrote: ↑It's only 9 am here, but it must be noon somewhere in the world?
Yes that's the normal learning curve here regardless of your time-zone...Polecat wrote: ↑Love it that I can be correctly corrected, learn something new, and relearn something I had forgotten over thirty years ago all at the same time.
- Daniel Beardsmore
- Location: Hertfordshire, England
- Main keyboard: Filco Majestouch 1 (home)/Poker II backlit (work)
- Main mouse: MS IMO 1.1
- Favorite switch: Probably not whatever I wrote here
- DT Pro Member: -
- Contact:
Ah, right, RJ11 is 6P2C … the cables I'm thinking of are the UK ADSL cables, which are 6P4C — I'd never noticed that the outer two positions were unused, so I mistook the plug for 4P4C.
Apple's ADB is unusual in that it's one of the rare protocols that uses a plug with the same number of pin positions as there are operational conductors in the cable. Now if only Apple had actually made ADB hot-swap safe — it worked perfectly at the OS level (demonstrated many times), but it was a no-no in terms of the circuitry.
Apple's ADB is unusual in that it's one of the rare protocols that uses a plug with the same number of pin positions as there are operational conductors in the cable. Now if only Apple had actually made ADB hot-swap safe — it worked perfectly at the OS level (demonstrated many times), but it was a no-no in terms of the circuitry.
- seebart
- Offtopicthority Instigator
- Location: Germany
- Main keyboard: Rotation
- Main mouse: Steelseries Sensei
- Favorite switch: IBM capacitive buckling spring
- DT Pro Member: 0061
- Contact:
Just for fun I'll share this "Cherry-Apple" that heymark sent me today:
https://tieba.baidu.com/p/4034770431?sh ... 3344350041
https://tieba.baidu.com/p/4034770431?sh ... 3344350041
- Myoth
- Location: Strasbourg
- Main keyboard: IDB60
- Main mouse: EC1-A
- Favorite switch: Cap BS
- DT Pro Member: -
That looks weird, but a good weirdseebart wrote: ↑Just for fun I'll share this "Cherry-Apple" that heymark sent me today:
https://tieba.baidu.com/p/4034770431?sh ... 3344350041
- seebart
- Offtopicthority Instigator
- Location: Germany
- Main keyboard: Rotation
- Main mouse: Steelseries Sensei
- Favorite switch: IBM capacitive buckling spring
- DT Pro Member: 0061
- Contact:
Pretty strange if you ask me but hey why not and if it works then that's quite a unique build.Myoth wrote: ↑That looks weird, but a good weirdseebart wrote: ↑Just for fun I'll share this "Cherry-Apple" that heymark sent me today:
https://tieba.baidu.com/p/4034770431?sh ... 3344350041
- webwit
- Wild Duck
- Location: The Netherlands
- Main keyboard: Model F62
- Favorite switch: IBM beam spring
- DT Pro Member: 0000
- Contact:
Those are Japanese sublegends.
- Tuntematon
- Location: Canada
- DT Pro Member: -
I would say green Alps, going by the letter designation at the end of the serial number.Keybug wrote: ↑Turns out it's a Chicony 5162. I guess no one can say for certain what switches it has, just from the label...