Cherry G80-1306HAD/01 US-layout
- Peter
- Location: Denmark
- Main keyboard: Steelseries 6Gv2/G80-1501HAD
- Main mouse: Mx518
- Favorite switch: Cherry Linear and Buckling Spring
- DT Pro Member: -
Kint, this is NOT a LK401-clone, it's a LK201-clone ..
The LK201 is pretty much *The Mother* of all modern ANSI and ISO layouts .
The original LK201 was NOT a Rubber-dome-of-Hell board, it had VERY basic linear 'mechanical' switches ..
(We are talking the simplest and CHEAPEST way imaginable to make them, but(t) nonetheless.. )
THIS Cherry-made clone-board is THE BOMB !
If anybody has second thoughts, is unhappy with, well, whatever ..Or -
has any other problem related to giving up your hard-earned cash ;
I will be more than happy to pick up the tab ( and receive the board(s)! )
so 'dirge' doesn't end up with a problem ..
Yellowing is cured with hydrogen-peroxide
Permanently !
The LK201 is pretty much *The Mother* of all modern ANSI and ISO layouts .
The original LK201 was NOT a Rubber-dome-of-Hell board, it had VERY basic linear 'mechanical' switches ..
(We are talking the simplest and CHEAPEST way imaginable to make them, but(t) nonetheless.. )
THIS Cherry-made clone-board is THE BOMB !
If anybody has second thoughts, is unhappy with, well, whatever ..Or -
has any other problem related to giving up your hard-earned cash ;
I will be more than happy to pick up the tab ( and receive the board(s)! )
so 'dirge' doesn't end up with a problem ..
Yellowing is cured with hydrogen-peroxide
Permanently !
- Peter
- Location: Denmark
- Main keyboard: Steelseries 6Gv2/G80-1501HAD
- Main mouse: Mx518
- Favorite switch: Cherry Linear and Buckling Spring
- DT Pro Member: -
Wouldn't mind that at all ..
But I would most likely keep them, the one I got is mint-condition
and the layout (and caps) kinda grow on a old-timer like me ..
Wouldn't mind using it, it can be made to work under Linux it seems .
But I would most likely keep them, the one I got is mint-condition
and the layout (and caps) kinda grow on a old-timer like me ..
Wouldn't mind using it, it can be made to work under Linux it seems .
- kint
- Location: northern Germany
- Main keyboard: g80-8200/ FK-2002
- Main mouse: genius netscroll optical gen1
- Favorite switch: MX clear/ Alps white comp
- DT Pro Member: -
I didn't say the cherry 1306 is a LK401 clone.Peter wrote:Kint, this is NOT a LK401-clone, it's a LK201-clone .....
When off quoted the pic of the very last board from this right buy, link: http://deskthority.net/marketplace-f11/ ... tml#p52193
I posted new found knowledge, since it seems to me that this (sole) board looks almost exactly like the LK401 boards I googled for. Now what the board off quoted the pic of really is - no clue, sorry. Just thought maybe someone wants to go from that information further on...
- off
- Location: the crapper, NL, EU
- DT Pro Member: -
no clue either, that was what the 'mysterious' was for; since it shouldn't be the LK201 that's mentioned in the OP, since according to Dirge, no pic was taken of that one... IIUC ofc.kint wrote: Now what the board off quoted the pic of really is - no clue, sorry. Just thought maybe someone wants to go from that information further on...
-
- Location: USA
- Main keyboard: KBC Poker MX Red
- Main mouse: Logitech MX Revolution
- Favorite switch: MX Red
- DT Pro Member: -
Still interested in keycaps only, as long as the modifiers, blank top row, and other unique keys are good I don't really care.
- dirge
- Location: Newcastle Upon Tyne, United Kingdom.
- DT Pro Member: -
Give Lauren a call bud, the F8 one is still there as lysol wanted good keys and in the pictures they do look pretty abused and the yellow one. As you know what to expect with postage, it would be cheaper anyway really unless I could get a slightly better deal than her. She was going to put the remaining two on eBay today or tomorrow. I just thought given the condition they could be picked up cheaper than £15. I mean the F8 board and yellow are only going to appeal to a VERY small group of people. Wouldn't be surprised if they go for £5 personally. I've picked up plenty WYSE boards for £1 over the past few months.
- dirge
- Location: Newcastle Upon Tyne, United Kingdom.
- DT Pro Member: -
So is the final list, myself, 7bit, kbdfr, ascaii, half-saint, frukstund, for the 6 then the two with damaged boxes and a little water stain to the boards I'm not sure what the call is on those? lysol was down for the F8 board which I don't think he wanted given it's condition so does that make it fossala and sixty for them?
- kint
- Location: northern Germany
- Main keyboard: g80-8200/ FK-2002
- Main mouse: genius netscroll optical gen1
- Favorite switch: MX clear/ Alps white comp
- DT Pro Member: -
I would put 20 GBP on the table for a set of 1306 Cherry caps, shipped to me in Germany. Don't need the board, don't care about a missing F8, shiny or yellowed keys. 25GBP for a full set.
I definitely won't rob anyones chance (!) this is just in case the board is a true leftover, would stay with the seller otherwise, etc.
I know I'm cheap, late, all that, just thought I'ld hate to see a leftover board on ebay again.
I definitely won't rob anyones chance (!) this is just in case the board is a true leftover, would stay with the seller otherwise, etc.
I know I'm cheap, late, all that, just thought I'ld hate to see a leftover board on ebay again.
- fruktstund
- Location: Sweden
- Main keyboard: HHKB Pro 2
- Main mouse: Logitech g400
- Favorite switch: Ergo-Clears (I think - can never decide)
- DT Pro Member: -
I'll just make a quick post here, as the PM said I should, and say I'm still interested in one of the fantastic six. Seems very much alright to me.
-
- Location: USA
- Main keyboard: KBC Poker MX Red
- Main mouse: Logitech MX Revolution
- Favorite switch: MX Red
- DT Pro Member: -
Ooops, I wasn't paying attention. I am out then I suppose.
- 7bit
- Location: Berlin, DE
- Main keyboard: Tipro / IBM 3270 emulator
- Main mouse: Logitech granite for SGI
- Favorite switch: MX Lock
- DT Pro Member: 0001
I'm quite sure Sixty wants one (he seems too busy to post).dirge wrote:So is the final list, myself, 7bit, kbdfr, ascaii, half-saint, frukstund, for the 6 then the two with damaged boxes and a little water stain to the boards I'm not sure what the call is on those? lysol was down for the F8 board which I don't think he wanted given it's condition so does that make it fossala and sixty for them?
- dirge
- Location: Newcastle Upon Tyne, United Kingdom.
- DT Pro Member: -
Okay, I've got tracking information but I'm out of the office tomorrow to see olympic torch so will have these early next week.
Final list is myself, 7bit, kbdfr, ascaii, half-saint, frukstund, then fossala and sixty.
I'll post pictures of the boards when they arrive and sort out money / shipping next week. 7bit, Ascaii, kbdfr get any ebay.co.uk items you want so they can be put in the same box. Just need to find a box big enough!
Final list is myself, 7bit, kbdfr, ascaii, half-saint, frukstund, then fossala and sixty.
I'll post pictures of the boards when they arrive and sort out money / shipping next week. 7bit, Ascaii, kbdfr get any ebay.co.uk items you want so they can be put in the same box. Just need to find a box big enough!
- dirge
- Location: Newcastle Upon Tyne, United Kingdom.
- DT Pro Member: -
- Half-Saint
- Location: Slovenia, Europe
- Main keyboard: Raptor Gaming K1
- Main mouse: Logitech G5 Mk.2
- Favorite switch: Cherry MX Blue
- DT Pro Member: 0058
Hi guys,
sorry I couldn't get back to you earlier, I was on vacation and no internet access!!! Anyway, I'm still interested in one of the good boards. Thanks
sorry I couldn't get back to you earlier, I was on vacation and no internet access!!! Anyway, I'm still interested in one of the good boards. Thanks
- dirge
- Location: Newcastle Upon Tyne, United Kingdom.
- DT Pro Member: -
reminder, 45 mins till end, no bids.dirge wrote:http://www.ebay.co.uk/itm/Digital-DEC-K ... 0823366674
In case anyone wants the yellow one.
- dirge
- Location: Newcastle Upon Tyne, United Kingdom.
- DT Pro Member: -
They've arrived today, and well the living rooms a fucking nightmare.
Packaging was, pretty shit. so, well, all the boxes are pretty fucked. The boards themselves are all fine. The two that were "not the best" are fine, just a little dust really.
All but one of the boxes had water stains on them, I've had to bin a few of them they were that bad. The only one that was close to NIB, was so covered in packing tape it doesn't look like NIB.
At the end of the day however, the boards are fine and at first inspection unused, just some are a bit dusty.
I'll be in touch with ppl over pm soon, and start sending them out next week.
Packaging was, pretty shit. so, well, all the boxes are pretty fucked. The boards themselves are all fine. The two that were "not the best" are fine, just a little dust really.
All but one of the boxes had water stains on them, I've had to bin a few of them they were that bad. The only one that was close to NIB, was so covered in packing tape it doesn't look like NIB.
At the end of the day however, the boards are fine and at first inspection unused, just some are a bit dusty.
I'll be in touch with ppl over pm soon, and start sending them out next week.
- kbdfr
- The Tiproman
- Location: Berlin, Germany
- Main keyboard: Tipro MID-QM-128A + two Tipro matrix modules
- Main mouse: Contour Rollermouse Pro
- Favorite switch: Cherry black
- DT Pro Member: 0010
Just leave it untouched and send it to medirge wrote:[...] The only one that was close to NIB, was so covered in packing tape it doesn't look like NIB.[...]
I have used the method described here (but without the lighter) on several occasions.
Last time is just a few days ago, on a box I had received quite a long time ago but which is so unique and so coloured I had postponed removing the tape until I had gained enough experience with that method.
Plain success
- Half-Saint
- Location: Slovenia, Europe
- Main keyboard: Raptor Gaming K1
- Main mouse: Logitech G5 Mk.2
- Favorite switch: Cherry MX Blue
- DT Pro Member: 0058
No problem, take as long as you need.