I would think it's more than one step since they have to put "stuff" in the switch body, the spring, the stem and then close it with the top of the switch body.damorgue wrote:I wouldn't want to be the guy that had to open thousands of switches. Too bad they only come assembled. One would think that they would be cheaper since there is one less step in the production line.
Cherry MX and Matias switches
-
- Location: Wisconsin
- Main keyboard: WASD V1 w/ Browns
- Main mouse: Mx518
- Favorite switch: Browns or Reds
- DT Pro Member: -
- rindorbrot
- Location: Bavaria, Germany
- Main keyboard: Phantom, GON NerD 2.0 TKL
- Main mouse: Zowie ZA11
- Favorite switch: MX Ergo-Clear, Nixdorf Soft-Touch
- DT Pro Member: 0029
how much do your working hours cost 7bit and how many switches are you able to pull apart in that?
-
- Location: Austria
- Main keyboard: Filco TKL with Red or Blue
- Main mouse: Logitech G500
- Favorite switch: Cherry Red, Blue, Vintage Black, Topre
- DT Pro Member: -
have these been confirmed if available? i ordered the version with pins, but if these are available i'll take those (cheaper).7bit wrote:MXWHITE |$0.6|MX1A-A1NN (available?)
if something is "available" and "in stock" does that mean you'll get the in stock quicker? or do you have to wait until all are done.
cheers
- damorgue
- Location: Sweden
- Main mouse: MX500
- Favorite switch: BS, MX Green and MX Clear
- DT Pro Member: -
- Contact:
You mean the other group buy, right? Wasn't this one scheduled for 2013 or something?7bit wrote:Switches will be delivered by the end of September.
- The_Ed
- Asperger's... SQUIRREL!
- Location: MN - USA
- Main keyboard: G80-3494LYCUS-2
- Main mouse: Razer Imperator
- Favorite switch: Red
- DT Pro Member: -
I can only hope that I'll receive my switches by the end of September. But something tells me that 7bit meant he will be getting another shipment of switches from cherry instead...
-
- Main keyboard: IBM Model M 1390120 Custom
- Main mouse: MX Revolution
- Favorite switch: Buckling Spring
- DT Pro Member: -
I just got an email about my order, but it says the order is for 0 switches... Can you help me out here 7bit?
Thanks,
Thanks,
-
- Location: USA
- Main keyboard: KBC Poker MX Red
- Main mouse: Logitech MX Revolution
- Favorite switch: MX Red
- DT Pro Member: -
Paid! Hope what I ordered are the ones you have on hand. Really looking forward to getting my custom project done.
-
- Location: Germany
- Main keyboard: HHKB Pro2, CM QFS MX Green, SSK, ErgoDox (MX Blue)
- Main mouse: CST L-Trac X, Logitech MX518,
- Favorite switch: Buckling spring, MX Green
- DT Pro Member: -
7bit, for how long are you planning to keep this group buy alive? I am on the ErgoDox group buy, but before it's absolutely clear when the keyboards will ship I don't want to buy the switches.
-
- Location: Ålesund, Norway
- DT Pro Member: -
where would I go if I wanted a couple of MX-Lock?
- 7bit
- Location: Berlin, DE
- Main keyboard: Tipro / IBM 3270 emulator
- Main mouse: Logitech granite for SGI
- Favorite switch: MX Lock
- DT Pro Member: 0001
Justr send the order to user CherryMX:Aleksander wrote:where would I go if I wanted a couple of MX-Lock?
MXLOCK 2
aleksander@domain.keyboard
- 7bit
- Location: Berlin, DE
- Main keyboard: Tipro / IBM 3270 emulator
- Main mouse: Logitech granite for SGI
- Favorite switch: MX Lock
- DT Pro Member: 0001
Invoices are for all switches.skruffi wrote:Just paid. So did all get an invoice yet or just the ones who ordered the switches that already arrived?
The missing switches are bothvariants of MXCLEAR and MXGREEN.
-
- Location: Ålesund, Norway
- DT Pro Member: -
done!7bit wrote:Justr send the order to user CherryMX:Aleksander wrote:where would I go if I wanted a couple of MX-Lock?
MXLOCK 2
aleksander@domain.keyboard
-
- Location: Ålesund, Norway
- DT Pro Member: -
hmmm. just noticed that my pre-order update did only have the MXblues i ordered on it, not the MXlocks...
- blighty
- Location: New York, USA
- Main keyboard: LZ ergo (mx silent red)
- Main mouse: Logitech G Pro
- Favorite switch: Cherry MX Silent Red
- DT Pro Member: 0037
Payments from lysol, skkhai, and Zifle have been received and marked as shipped for Paypal purposes (to keep them from locking up the PP account). Invoices may or may not reflect the payments yet. Keep checking this thread for the actual ship date.
- 7bit
- Location: Berlin, DE
- Main keyboard: Tipro / IBM 3270 emulator
- Main mouse: Logitech granite for SGI
- Favorite switch: MX Lock
- DT Pro Member: 0001
Please re-order. I had an error in the list, so you could not order MXLOCK/NW.Aleksander wrote:hmmm. just noticed that my pre-order update did only have the MXblues i ordered on it, not the MXlocks...
-
- Location: Ålesund, Norway
- DT Pro Member: -
Worked this time, Thanks!7bit wrote:Please re-order. I had an error in the list, so you could not order MXLOCK/NW.Aleksander wrote:hmmm. just noticed that my pre-order update did only have the MXblues i ordered on it, not the MXlocks...
-
- Location: Denmark
- Main keyboard: Filco MJ2 Browns
- Main mouse: Razer Mamba
- Favorite switch: MX Browns
- DT Pro Member: -
You can, just send the bot a message with either PAYPAL or PAYPALINT, depending on whether you are in the US or not.komar007 wrote:The bot tells me to pay by SEPA, can I pay by paypal instead?
- GH1391401
- Location: 'merica
- Main keyboard: Leopold TKL
- Favorite switch: MX Clear
- DT Pro Member: -
Ok, so I guess if there's no answer to my question I will cancel order, is this in any way tied to Round 4 because I've paid 99% for that and it'd be a shame to lose all that money because I send "Clear All"
Thanks!
Thanks!