Phantom Custom Keyboard Group Buy (CLOSED)

[agor]

I can take a picture of my Noppoo Choc this evening if you want. This made things clear for me.

[The_Ed]

...Goes to check G81 stabilizer baggie...I found 2 of what you are talking about

[Half-Saint]

Definitely different. Thanks for clearing that up.

[The_Ed]

They may still work, but I think they are only used for the spacebar stabilizer in some G81 models. That makes them impractical to obtain a full set for a keyboard, unless you gut piles of G81's.

[Half-Saint]

They may still work, but I think they are only used for the spacebar stabilizer in some G81 models. That makes them impractical to obtain a full set for a keyboard, unless you gut piles of G81's.

Which is what I did lol

I messed up and put hoggy's switches onto my plate. What's the easiest way of removing them without scratching the plate?

Cheers

Never mind, I did it already using a very thin letter opener

[7bit]

Hope everybody got their stuff.

Please post here or pm me if not.

I'vce got a few leftover plates and PCBs. I will make an inventory and post the result today.

[Pby]

Please do tell if you have a PHANSI. Would like one along with a PCB

[7bit]

Please do tell if you have a PHANSI. Would like one along with a PCB

I only have PHANSIWIN (3 keys to the left, 4 to the right and in the middle a 6.25 units space bar).

[rindorbrot]

Do you have a complete kit for a phiso left?

[7bit]

Do you have a complete kit for a phiso left?

No.

What I have left is:

1x PHANSIWIN
2x PHANSIWIN without LED-holes and for platemountable stabilisers (don't ask me which).

No PCBs or Teensys. I've got some Teensy legs and a few stabiliser wires, but no stabliser inserts or mounts.

I might sell a PCB + 7BIT-plate + diodes + switches + a teensy if I get a good offer.

[dirge]

I might sell a PCB + 7BIT-plate + diodes + switches + a teensy if I get a good offer.

A future classic! Will be more valued than the 356cl! Everyone should own one!

[litster]

If you like your Phantom, please go to the links below to vote for Phantom for these Deskthority Awards:

Vote Phantom for best keyboard company or Brand

Vote Phantom for The Deskthority Award

Vote Phantom for Best Space-Saving Compact Keyboard

[BiNiaRiS]

2x PHANSIWIN without LED-holes and for platemountable stabilisers (don't ask me which).

If those are the custom plates in which there was only 2 made, those are not for sale. I emailed you awhile about those. I just emailed you again to confirm.

[7bit]

Sorry, didn't know that.

According to my data, these where 4 and should have been sent to someone else located in the US.

I've asked for those but can't remember any response. Nevertheless, I ship them to their owner.

[BiNiaRiS]

Sorry, didn't know that.

According to my data, these where 4 and should have been sent to someone else located in the US.

I've asked for those but can't remember any response. Nevertheless, I ship them to their owner.

I just pm'd you his info. I emailed you on your phantom mbox email about this, i assume you stopped checking it. I should just PM you on here when i need you, haha.

[litster]

Final round of Deskthority Awards voting has begun. If you like your Phantom, please go to the links below to vote for Phantom for these Deskthority Awards:

Vote Phantom for best keyboard company or Brand

Vote Phantom for The Deskthority Award

Vote Phantom for Best Space-Saving Compact Keyboard

PhantomPCBFront.jpg (779.69 KiB) Viewed 4913 times

[Half-Saint]

Is it just me or is Phantom ANSI125 completely fubar?

[bpiphany]

Is it just me or is Phantom ANSI125 completely fubar?

I haven't heard about any problems? What seems to be the issue?..

[Donbabbeo]

Do you have a complete kit for a phiso left?

No.

What I have left is:

1x PHANSIWIN
2x PHANSIWIN without LED-holes and for platemountable stabilisers (don't ask me which).

No PCBs or Teensys. I've got some Teensy legs and a few stabiliser wires, but no stabliser inserts or mounts.

I might sell a PCB + 7BIT-plate + diodes + switches + a teensy if I get a good offer.

So no more PCB left?
At least i hope to see a lot of pictures of the phantom on the forum

[TheProfosist]

Sorry, didn't know that.

According to my data, these where 4 and should have been sent to someone else located in the US.

I've asked for those but can't remember any response. Nevertheless, I ship them to their owner.

I just pm'd you his info. I emailed you on your phantom mbox email about this, i assume you stopped checking it. I should just PM you on here when i need you, haha.

You guys talking about me? Interested in those plates or something?

[korne]

I wan't to kill myself for not buying one of those phantoms when they were available.

Hopping for a 2nd group buy

I love that custom DIY proyects

[Pby]

I think theres a phantom v2 planned but until then

[Donbabbeo]

Same here, i hope for a phantom v2, there is some official info or are only rumors?

[riffautae]

I just finished building my board. Pics attached. I'll solder on the caps lock key when I get my key caps. I made ergo clear switches for the board.

My github has a tmk firmware modified for the 7bit layout. Check out the riff_layouts branch if you need a template.

[korne]

riffautae looking fantastic.

Btw i know it gonna be hard, but if anyone have a phantom to sell im very interested

[CeeSA]

riffautae looking fantastic.

Btw i know it gonna be hard, but if anyone have a phantom to sell im very interested

hmm, i really have to think about selling my unused parts:

PHANSI |mount plate ANSI
PHANTOM |Phantom PCB
TEENSY |Teensy controller

[jdcarpe]

Phantom PCB (only) round 2 Interest Check is up at Geekhack. http://geekhack.org/index.php?topic=38287.

[dirge]

Could do with maybe the odd change? Smd controller? Or just a repeat?

[Half-Saint]

Personally I hate how teensy is mounted but that's just me

[damorgue]

It would probably require quite the redesign of the PCB and traces, but it would enable case designs to be thinner and less complex.