Cherry G80-9013
This article is a stub. You can help Deskthority by expanding it.
 |
This article requires photographic illustration |
 | |
| Model no. | G80-9013 |
|---|---|
| Branding | Codis |
| Manufacturer | Cherry |
| Layouts | German only |
| Keyswitches | Cherry MX Black |
| Switch mount | PCB mount |
| Precedes | Phoneboard+ |
The Cherry G80-9013 ("phoneboard") is a keyboard with an integrated telephone. It features full n-key rollover and was manufactured by Cherry for CODIS Computer GmbH in Ottobrunn, Germany.
Introduction
The keyboard contains the whole telephone unit except for the handset or headset, for each of which a dedicated plug is situated on the left side of the keyboard case. Volume regulation is done using a small wheel situated at the rear of the keyboard housing (one for the headset, one for the built-in speaker).
The handset has a storage tray with no other function than storage (which means putting the handset back to the tray does not interrupt the communication, this has to be done by pressing a key of the keyboard).
The speaker is situated above the telephone keys and the built-in microphone on the case front (beneath the Ctrl key).
Known variants
- G80-9013 HAD (German layout, black switches)
How to disassemble
For the G80-9013 HAD, just loosen the 4 screws on the back side. Similar to IBM Model M (101 key), you need a narrow screw driver! Unless the original, a cross-point is sufficient.
Unlike later models, you need the screw driver not for clips!
Gallery
- G80-9013HAD
The G80-9013 HAD comes in a case similar to the G80-1000 but with some cut-outs for the telephone unit and a speaker grille.
Factory sticker at the rear
Detail Caps Lock key with LED window
Detail numpad and phone section
Overview of the PCB; note the microphone near the lower left corner.
PCB moved aside
Overview with PCB aside
Speaker zone
Another view of the speaker zone
Telephone PCB
Left side of the telephone PCB in detail.
