SSK PACKAGE DEAL 11 FOR 1850 USD SHIPPED!
- GeorgeK
- Location: Kent, United Kingdom
- Main keyboard: Filco Ninja TKL w/Browns
- Main mouse: CM Storm Inferno
- Favorite switch: Cherry MX Browns
- DT Pro Member: -
I didn't realise they could be too tight (not that I tightened them that much) - I'll give that a whirl thanks
Edit: I've given that a go but to no avail - I think I'll have to take it apart and have a look at the mylar sheets and / or the spring itself. It could be that some gunk got near the c part of the sheets (although I kept them well separate when I was doing the drilling etc) or that the spring is wearing out and needs swapping with a less used one)
Edit: I've given that a go but to no avail - I think I'll have to take it apart and have a look at the mylar sheets and / or the spring itself. It could be that some gunk got near the c part of the sheets (although I kept them well separate when I was doing the drilling etc) or that the spring is wearing out and needs swapping with a less used one)
- Muirium
- µ
- Location: Edinburgh, Scotland
- Main keyboard: HHKB Type-S with Bluetooth by Hasu
- Main mouse: Apple Magic Mouse
- Favorite switch: Gotta Try 'Em All
- DT Pro Member: µ
Bolt mod: a bit of work, but now you can get in there anytime you need to.
Definitely swap the spring for a less used key. I had a few bent ones in my 122 key, including E whose failure was my excuse to delve deep. Any kink in those old springs means you'll want a replacement. One I swapped those out, I was done.
Well, until the next step of getting shorter bolts so I could close the case without tension! They protrude quite a bit near the front.
Definitely swap the spring for a less used key. I had a few bent ones in my 122 key, including E whose failure was my excuse to delve deep. Any kink in those old springs means you'll want a replacement. One I swapped those out, I was done.
Well, until the next step of getting shorter bolts so I could close the case without tension! They protrude quite a bit near the front.
- GeorgeK
- Location: Kent, United Kingdom
- Main keyboard: Filco Ninja TKL w/Browns
- Main mouse: CM Storm Inferno
- Favorite switch: Cherry MX Browns
- DT Pro Member: -
All in all, with breaks to go buy superglue and make lunch / wash up, it took me about 5 hours (so probably more like 3 1/2 hours of actual work time). Probably took me longer as I had to use what I believe is a jewellery drill due to my dremel not being able to hold a 1/16" drill bit (wrong collet). At least dismantling it now should only take 10 minutes or soMuirium wrote:Bolt mod: a bit of work, but now you can get in there anytime you need to.
Definitely swap the spring for a less used key. I had a few bent ones in my 122 key, including E whose failure was my excuse to delve deep. Any kink in those old springs means you'll want a replacement. One I swapped those out, I was done.
I was thinking "Paypal really don't get group buys do they" but then I realised that you're probably not running this as a group buy... Has someone disputed something? That often f****s up people on these forums...tinnie wrote:Paypal wants some info of a transaction which doesn't fucking exist in my pp account.
-
- Location: Duisburg, DE
- Main keyboard: G84-4400
- Favorite switch: Cherry ML
- DT Pro Member: 0218
No one disputed somehting. I'm so fucking mad now!GeorgeK wrote:All in all, with breaks to go buy superglue and make lunch / wash up, it took me about 5 hours (so probably more like 3 1/2 hours of actual work time). Probably took me longer as I had to use what I believe is a jewellery drill due to my dremel not being able to hold a 1/16" drill bit (wrong collet). At least dismantling it now should only take 10 minutes or soMuirium wrote:Bolt mod: a bit of work, but now you can get in there anytime you need to.
Definitely swap the spring for a less used key. I had a few bent ones in my 122 key, including E whose failure was my excuse to delve deep. Any kink in those old springs means you'll want a replacement. One I swapped those out, I was done.
I was thinking "Paypal really don't get group buys do they" but then I realised that you're probably not running this as a group buy... Has someone disputed something? That often f****s up people on these forums...tinnie wrote:Paypal wants some info of a transaction which doesn't fucking exist in my pp account.
- GeorgeK
- Location: Kent, United Kingdom
- Main keyboard: Filco Ninja TKL w/Browns
- Main mouse: CM Storm Inferno
- Favorite switch: Cherry MX Browns
- DT Pro Member: -
I don't blame you! Paypal can be real arses - unfortunately they know that they've got you over a barrel as, by using their service, you've agreed to their terms and conditions which somewhere must say that they can pretty much do what they want when they want... Is it a keyboard transaction they're querying?
-
- Location: Washington, DC -- USA
- Main keyboard: 1391401
- Main mouse: Logitech Anywhere MX
- Favorite switch: buckling spring
- DT Pro Member: -
Paypal should be able to see that from their side too. They should be able to give you the transaction unique ID.tinnie wrote:Paypal wants some info of a transaction which doesn't fucking exist in my pp account.
- mbodrov
- Location: Moskva, Russia
- Main keyboard: Cherry G80-1853
- Main mouse: Logitech G5
- Favorite switch: MX ErgoClear
- DT Pro Member: -
Paypal can behave like a real ***hole.tinnie wrote:Well, they said they'll resolve it in coming week.
P.S. Won't ship any stuff before paypal unlock my account, sorry.
Be careful there Tinlong, remember what happened to Sixty...
- Muirium
- µ
- Location: Edinburgh, Scotland
- Main keyboard: HHKB Type-S with Bluetooth by Hasu
- Main mouse: Apple Magic Mouse
- Favorite switch: Gotta Try 'Em All
- DT Pro Member: µ
What happened to Sixty? Did he fall into a wormhole? Is this all some evil experiment in space travel by Elon Musk?? That scoundrel.
- Dubsgalore
- Location: USA
- Main keyboard: ESA-3000-HASRO
- Main mouse: Deathadder 2013
- Favorite switch: MX Blacks
- DT Pro Member: -
Nice Tin, Paypal is fixed!
My first time with paypal i had heard sketchy things..but after using it I haven't really had any trouble with it...
this all has been such a headache for you
My first time with paypal i had heard sketchy things..but after using it I haven't really had any trouble with it...
this all has been such a headache for you
- rindorbrot
- Location: Bavaria, Germany
- Main keyboard: Phantom, GON NerD 2.0 TKL
- Main mouse: Zowie ZA11
- Favorite switch: MX Ergo-Clear, Nixdorf Soft-Touch
- DT Pro Member: 0029
Any news to the shipping status of the Kishsavers?
-
- Location: Amsterdam
- Main keyboard: variable: beamspring, Northgate, IBM SSK, Topre
- Main mouse: CST L-Trac
- Favorite switch: beamspring, dampened complicated white Alps, Topre
- DT Pro Member: -
what is the status of this ? I paid for the kishsaver, but not yet for shipping.
I'm not in a hurry, but I am curious..
I'm not in a hurry, but I am curious..
- Daemon Raccoon
- Location: Flyover Country, United States
- Main keyboard: Model M SSK 1391472
- Main mouse: CST2545W-RC LTrac
- Favorite switch: Buckling Spring
- DT Pro Member: -
Tin mentioned shipping more this coming Friday, the US proxy has most(?) of the Kishsavers bound for North Americans. No clue on the European proxies' status.
- Muirium
- µ
- Location: Edinburgh, Scotland
- Main keyboard: HHKB Type-S with Bluetooth by Hasu
- Main mouse: Apple Magic Mouse
- Favorite switch: Gotta Try 'Em All
- DT Pro Member: µ
Have a look at the OP. I'm pencilled in as the UK proxy, while Kurk and Snoopy are doing mainland Europe. But I've heard nothing about shipping since Tinnie's PP got locked. We're all waiting on that getting sorted out I think.
- rindorbrot
- Location: Bavaria, Germany
- Main keyboard: Phantom, GON NerD 2.0 TKL
- Main mouse: Zowie ZA11
- Favorite switch: MX Ergo-Clear, Nixdorf Soft-Touch
- DT Pro Member: 0029
Hooray!
-
- Location: Jersey, Channel islands (sort of UK)
- Main keyboard: IBM model m '86
- Main mouse: CM storm spawn...trackball soon too.
- Favorite switch: buckling spring
- DT Pro Member: -
long time no see...anything still available. miss you all but im far to busy for keyboards currently...always on irc