Round 5 and Round 6 kits for sale!

[bianco]

sorry if i missed details regarding this...
but would these keys be off centered or not?

HONEY/LOTUS175S
HONEY/LOTUS175S/RED
HONEY/LOTUS175S/BLACK

[7bit]

sorry if i missed details regarding this...
but would these keys be off centered or not?

HONEY/LOTUS175S
HONEY/LOTUS175S/RED
HONEY/LOTUS175S/BLACK

They are off-center (1.25 units keys with an extra 0.5 units step at the right).

[rindorbrot]

Do any stepped caps have centered stems?

I think there was some attempt about this, but I'm quite sure it was not an SA-family key cap.

Center stemmed, stepped Capslock is available only as DCS-family. I think it was i3oilermaker who offered them first.

[bianco]

sorry if i missed details regarding this...
but would these keys be off centered or not?

HONEY/LOTUS175S
HONEY/LOTUS175S/RED
HONEY/LOTUS175S/BLACK

They are off-center (1.25 units keys with an extra 0.5 units step at the right).

thank you sir

[Vierax]

A wall with glossy paint is more waterproof and easy to clean than a mate one because the surface is smooth/tensed instead of granular so dust slides on it. It's the reflection of the light on a polished surface which makes its shinny, as worked metal or stone in jewelery.

Concerning language sets, 7bit is one of the rare offering those particularities and it's precious. I didn't see even dvorak or colemak or UK sets in the whole GB running in GH (the commando SA profile helped a bit but only for US layouts) There are poor ISO sets when it's an available option. Thank you 7bit for your concern and all the extra work it implies.
FR and BÉPO are as insane as French people and our crazy language (Yeah it seems that we love to do everything unlike the others :·þ )

[7bit]

In Round 3, we had off-center full touch keys. It was the stupidest idea I've ever had, because SP messed them up and made them too far off-center (both stepped and unstepped!) and because when tuched at the right edge, they don't really work well ...

...
Concerning language sets, 7bit is one of the rare offering those particularities and it's precious. I didn't see even dvorak or colemak or UK sets in the whole GB running in GH (the commando SA profile helped a bit but only for US layouts) There are poor ISO sets when it's an available option. Thank you 7bit for your concern and all the extra work it implies.
FR and BÉPO are as insane as French people and our crazy language (Yeah it seems that we love to do everything unlike the others :·þ )

SCART connecteur, the extra pin in power sockets, yellow headlights, SECAM, decimal clock and right-hand traffic come to mind. Thanks goodness, half of these are history or had been taken over by allmost all European nations.

[rindorbrot]

In Round 3, we had off-center full touch keys. It was the stupidest idea I've ever had, because SP messed them up and made them too far off-center (both stepped and unstepped!) and because when tuched at the right edge, they don't really work well ...

Do those fit the MX-Board 3.0, by any chance?

[7bit]

Two broken designs always fit!

[7bit]

10 days until the 16th December!

Who did not pay by then and did not ask to pay later, will be cleared out to make sure there are no phantom users which finally disappear when we order.

I will change some more prices and post a new list today. Prices might get down a bit when I get the new price for tooling costs on Monday ...

[matt3o]

will you be sending an invoice with the new price list?

[7bit]

Yes.

[rindorbrot]

Are you making a new mold again or what are the tooling costs for?

[quaker4lyf]

10 days until the 16th December!

Who did not pay by then and did not ask to pay later, will be cleared out to make sure there are no phantom users which finally disappear when we order.

I will change some more prices and post a new list today. Prices might get down a bit when I get the new price for tooling costs on Monday ...

What if we already paid part of the total to megnin? I don't think I've seen an update on what to do in that situation yet.

[7bit]

If it turns out you paid more than your order actually costs, then you will get a refund. But you can also use that money for the next group buy ...

Are you making a new mold again or what are the tooling costs for?

R1U200


But tooling costs are also for new legends.

=================================================================

Here we go:

Also available:
HONEY/INTER/RED
HONEY/INTER/RED2


Also available:
HONEY/INTER/BLACK
HONEY/INTER/BLACK2



Also available:
HONEY/BEPOALPHA
HONEY/BEPOALPHA2
HONEY/BEPOALPHA3

Code: Select all

Order-ID                |Ord|Pcs|Price|Cur|Description
HONEY/INTER/RED         |  4| 38|   35|USD|language kit for DE,DK,NO,SE
HONEY/INTER/RED2        |   | 76|   52|USD|language kit for DE,DK,NO,SE 2x
HONEY/INTER/RED3        |   |114|   72|USD|language kit for DE,DK,NO,SE 3x
HONEY/INTER/BLACK       |  3| 44|   39|USD|language kit for DE,DK,NO,SE,IT
HONEY/INTER/BLACK2      |   | 88|   59|USD|language kit for DE,DK,NO,SE,IT 2x
HONEY/INTER/BLACK3      |   |132|   79|USD|language kit for DE,DK,NO,SE,IT 3x
HONEY/BEPOALPHA         |  4| 51|   45|USD|BEPOALPHA language kit
HONEY/BEPOALPHA2        |   |102|   79|USD|BEPOALPHA language kit 2x
HONEY/BEPOALPHA3        |   |153|   99|USD|BEPOALPHA language kit 3x
HONEY/BEPOALPHA4        |   |204|  109|USD|BEPOALPHA language kit 4x

[farinasa_]

Damn why did the deep dishes go back up? They are at 10 orders.

[7bit]

They are so expensive because of the low quantities they are ordered.

[bearcat]

Another invoice???

I sent one out to megnin for 2.86 last week, now another one for 4.94 -- is this the last one? I could save you guys a lot on paypal fees by only paying you once!

[Yslen]

Aren't paypal fees just a % of each payment?

[7bit]

Another invoice???

I sent one out to megnin for 2.86 last week, now another one for 4.94 -- is this the last one? I could save you guys a lot on paypal fees by only paying you once!

You better read the text in the invoice!


Prices are updateded. Some went up and some went down. There will be another invoice, once I got the tooling costs on Monday or maybe Tuesday.

I've sent the updated invoices so everybody can see how much he paid and what kits are available for what prices etc.

In my key caps group buys, this is a normal thing. Ignore it until the deadline (16th December) when you will get another one ...

[solarnz]

It appears that every time 7bit sends me a new invoice, I want to add more keycaps.

Somehow I think 7bit would be a very good used car salesman.

[farinasa_]

They are so expensive because of the low quantities they are ordered.

So how many would I need to order to get the price to $1? I might go up as high as 100.

[solkoseryl]

Does the HONEY/VERTBSL/R4/BLACK (1.0x Vertical Backslash, row 4, black) available? I couldn't found it in Wiki.

[7bit]

Code: Select all

HONEY/ALPHAUK           |R4U100 |NN (Black) |WFK (White)|\vert,\backslash
HONEY/ALPHAUK/BLACK     |R4U100 |WFK (White)|NN (Black) |\vert,\backslash
HONEY/UK                |R4U100 |NN (Black) |WFK (White)|\vert,\backslash
HONEY/UK/BLACK          |R4U100 |WFK (White)|NN (Black) |\vert,\backslash
HONEY/VERTBSL/R4        |R4U100 |NN (Black) |WFK (White)|\vert,\backslash
HONEY/VERTBSL/R4/RED    |R4U100 |WFK (White)|RAS (Red)  |\vert,\backslash

[quaker4lyf]

If it turns out you paid more than your order actually costs, then you will get a refund. But you can also use that money for the next group buy ...

No actually I paid 71.76 to megnin but my new invoice says to pay 76.96 to jefferai. When will my payment to megnin be acknowledged? (As you said, there's only ten days left to get this sorted out...)

[solkoseryl]

OK, thanks!

But I didn't get it anyway. I need in the separate black backslash key.

The command to 7bot is

Code: Select all

HONEY/VERTBSL/R4

Correct?

And how to mark the key color in the command? Or does it have to be

Code: Select all

HONEY/VERTBSL/R4/BLACK

?

But this one is absent in the list...

[7bit]

If it turns out you paid more than your order actually costs, then you will get a refund. But you can also use that money for the next group buy ...

No actually I paid 71.76 to megnin but my new invoice says to pay 76.96 to jefferai. When will my payment to megnin be acknowledged? (As you said, there's only ten days left to get this sorted out...)

Megnin is not so quick, but I'm quite sure he will update the list soon!

[pasph]

After 16th December we can still add or delete items from the orders?

[7bit]

Yes, add as much as you can at any time until the whole order is sold out!

Next week, I will ask when they can start production.

BTW, when I say I clear unpaid orders, I mean orders for which there had never ever been paid something.

[Muirium]

That includes mine. I'm still saving up USDs. Can I make a partial payment?

[7bit]

Yes, but that is not required! I'm quite sure you will not drop off.