I'm sure someone has already done this, but I haven't found it, so hopefully this helps.
I'm a hardware guy. I've always meant to get into coding, and this little project really gave me a nice 101 crash course. Still not entirely sure what I'm doing, but I have a fuzzy idea...
THANK YOU HASU FOR YOUR AWESOME WORK! ^_^
And thank you matt3o for your very awesome intro guide to his firmware!
- 2014-06-01 19.14.12.jpg (176.82 KiB) Viewed 12053 times
- Layer 2 - COLOR MATRIX COMBINED.jpg (747.68 KiB) Viewed 12053 times
Code: Select all
#define KEYMAP_ANSI( \
K72, K53, K54, K64, K74, K76, K78, K69, K59, K56, K46, K4B, K4C, K4F, K3F, K1E, \
K52, K42, K43, K44, K45, K55, K57, K47, K48, K49, K4A, K5A, K58, K66, K5C, K5E, K5D, \
K62, K32, K33, K34, K35, K65, K67, K37, K38, K39, K3A, K6A, K68, K26, K5B, K4E, K4D, \
K63, K22, K23, K24, K25, K75, K77, K27, K28, K29, K2A, K7A, K16, \
K61, K12, K13, K14, K15, K05, K07, K17, K18, K19, K0A, K11, K7E, \
K50, K7F, K06, K0F, K10, K0E, K0B, K0C \
) { \
{ KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_##K05, KC_##K06, KC_##K07, KC_NO, KC_NO, KC_##K0A, KC_##K0B, KC_##K0C, KC_NO, KC_##K0E, KC_##K0F }, \
{ KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_NO, KC_NO, KC_NO, KC_NO, KC_##K1E, KC_NO }, \
{ KC_NO, KC_NO, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K2A, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \
{ KC_NO, KC_NO, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_NO, KC_##K37, KC_##K38, KC_##K39, KC_##K3A, KC_NO, KC_NO, KC_NO, KC_NO, KC_##K3F }, \
{ KC_NO, KC_NO, KC_##K42, KC_##K43, KC_##K44, KC_##K45, KC_##K46, KC_##K47, KC_##K48, KC_##K49, KC_##K4A, KC_##K4B, KC_##K4C, KC_##K4D, KC_##K4E, KC_##K4F }, \
{ KC_##K50, KC_NO, KC_##K52, KC_##K53, KC_##K54, KC_##K55, KC_##K56, KC_##K57, KC_##K58, KC_##K59, KC_##K5A, KC_##K5B, KC_##K5C, KC_##K5D, KC_##K5E, KC_NO }, \
{ KC_NO, KC_##K61, KC_##K62, KC_##K63, KC_##K64, KC_##K65, KC_##K66, KC_##K67, KC_##K68, KC_##K69, KC_##K6A, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \
{ KC_NO, KC_NO, KC_##K72, KC_NO, KC_##K74, KC_##K75, KC_##K76, KC_##K77, KC_##K78, KC_NO, KC_##K7A, KC_NO, KC_NO, KC_NO, KC_##K7E, KC_##K7F } \
}Code: Select all
const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/* 0: qwerty */
KEYMAP_ANSI(
ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR, SLCK, PAUS, \
GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS, EQL, BSPC, INS, HOME, PGUP, \
TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC, RBRC, BSLS, DEL, END, PGDN, \
CAPS, A, S, D, F, G, H, J, K, L, SCLN, QUOT, ENT, \
LSFT, Z, X, C, V, B, N, M, COMM, DOT, SLSH, RSFT, UP,\
LCTL, LALT, SPC, RALT, RCTL, LEFT, DOWN, RIGHT),
};Code: Select all
/* Column pin configuration
* col: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
* pin: B0 B1 B2 B3 B7 D0 D1 D2 D3 C6 C7 D5 E6 D4 D7 B4
*/
static void init_cols(void)
{
// Input with pull-up(DDR:0, PORT:1)
DDRE &= ~(1<<6);
PORTE |= (1<<6);
DDRD &= ~(1<<7 | 1<<5 | 1<<4 | 1<<3 | 1<<2 | 1<<1 | 1<<0);
PORTD |= (1<<7 | 1<<5 | 1<<4 | 1<<3 | 1<<2 | 1<<1 | 1<<0);
DDRC &= ~(1<<7 | 1<<6);
PORTC |= (1<<7 | 1<<6);
DDRB &= ~(1<< 7 | 1<<4 |1<<3 | 1<<2 | 1<<1 | 1<<0);
PORTB |= (1<< 7 | 1<<4 |1<<3 | 1<<2 | 1<<1 | 1<<0);
}
static matrix_row_t read_cols(void)
{
return (PINB&(1<<0) ? 0 : (1<<0)) |
(PINB&(1<<1) ? 0 : (1<<1)) |
(PINB&(1<<2) ? 0 : (1<<2)) |
(PINB&(1<<3) ? 0 : (1<<3)) |
(PINB&(1<<7) ? 0 : (1<<4)) |
(PIND&(1<<0) ? 0 : (1<<5)) |
(PIND&(1<<1) ? 0 : (1<<6)) |
(PIND&(1<<2) ? 0 : (1<<7)) |
(PIND&(1<<3) ? 0 : (1<<8)) |
(PINC&(1<<6) ? 0 : (1<<9)) |
(PINC&(1<<7) ? 0 : (1<<10)) |
(PIND&(1<<5) ? 0 : (1<<11)) |
(PINE&(1<<6) ? 0 : (1<<12)) |
(PIND&(1<<4) ? 0 : (1<<13)) |
(PIND&(1<<7) ? 0 : (1<<14)) |
(PINB&(1<<4) ? 0 : (1<<15));
}
/* Row pin configuration
* row: 0 1 2 3 4 5 6 7
* pin: F0 F1 F4 F5 F6 F7 B6 B5
*/
static void unselect_rows(void)
{
// Hi-Z(DDR:0, PORT:0) to unselect
DDRF &= ~0b11110011;
PORTF &= ~0b11110011;
DDRB &= ~0b01100000;
PORTB &= ~0b01100000;
}
static void select_row(uint8_t row)
{
// Output low(DDR:1, PORT:0) to select
switch (row) {
case 0:
DDRF |= (1<<0);
PORTF &= ~(1<<0);
break;
case 1:
DDRF |= (1<<1);
PORTF &= ~(1<<1);
break;
case 2:
DDRF |= (1<<4);
PORTF &= ~(1<<4);
break;
case 3:
DDRF |= (1<<5);
PORTF &= ~(1<<5);
break;
case 4:
DDRF |= (1<<6);
PORTF &= ~(1<<6);
break;
case 5:
DDRF |= (1<<7);
PORTF &= ~(1<<7);
break;
case 6:
DDRB |= (1<<6);
PORTB &= ~(1<<6);
break;
case 7:
DDRB |= (1<<5);
PORTB &= ~(1<<5);
break;
}
}Next up is to etch some PCB's.
Also, a couple of questions since I need to take a break from looking at code:
The number lock. I'm assuming the easiest solution would be to map a new layer with the Shift+Scroll Lock combo?
LED support! I tried changing the led file to write to the teensy's LED as an experiment, but I'm not getting anything. Which brings me to...
I2C i/o expander! I would like to be able to have control of status LED's as well as some backlighting. Sure I could get some teensy ++'s, but the regular teensy + an expander is significantly less expensive. Any experience/tips with those?
Thanks!
I have a nice Wheelwriter keyboard I'd like to make a controller for.
