KBC Poker aka "KBC 60%" aka "KBC 40%"
- keyboardlover
- Location: USA, Greatest Country in the World.
- Main keyboard: Cherry G80-3494 Modded (home)/Realforce 87U (work)
- Main mouse: Handshoe Ergonomic Mouse
- Favorite switch: Cherry Ergo Lite Clears
- DT Pro Member: -
I agree. The switch configuration seems weirdddddd.
- sixty
- Gasbag Guru
- Main keyboard: DKSaver
- Favorite switch: Cherry MX Black
- DT Pro Member: 0060
The switch configuration is only like this on the first 100 they made, the retail model will be uniform keys. Its basically only there "for the lulz", so the collectors who got some of the very first batch have something rare.
For example the MX Blue variant has a production-error mx switch in a very dark teal blue for the ESC. The MX black and brown variants have a red switch for ESC.
For example the MX Blue variant has a production-error mx switch in a very dark teal blue for the ESC. The MX black and brown variants have a red switch for ESC.
- sixty
- Gasbag Guru
- Main keyboard: DKSaver
- Favorite switch: Cherry MX Black
- DT Pro Member: 0060
Review up:
http://deskthority.net/viewtopic.php?f=4&t=125
Not as complete as I may have hoped for, but I had no way to test for rollover abilities and such yet. Will fix/add stuff tomorrow.
http://deskthority.net/viewtopic.php?f=4&t=125
Not as complete as I may have hoped for, but I had no way to test for rollover abilities and such yet. Will fix/add stuff tomorrow.
-
- Location: Taiwan
- DT Pro Member: -
- Contact:
- Attachments
-
- DHL.JPG (107.4 KiB) Viewed 5227 times
- webwit
- Wild Duck
- Location: The Netherlands
- Main keyboard: Model F62
- Favorite switch: IBM beam spring
- DT Pro Member: 0000
- Contact:
Nothing yet. It is a whole 15km, after all. The first 10000km took 17 hours, currently for the last 15km DHL is getting below 150m/hour. This makes an old crippled woman with a cane faster.
- keyboardlover
- Location: USA, Greatest Country in the World.
- Main keyboard: Cherry G80-3494 Modded (home)/Realforce 87U (work)
- Main mouse: Handshoe Ergonomic Mouse
- Favorite switch: Cherry Ergo Lite Clears
- DT Pro Member: -
I'm down with PCB.
- webwit
- Wild Duck
- Location: The Netherlands
- Main keyboard: Model F62
- Favorite switch: IBM beam spring
- DT Pro Member: 0000
- Contact:
That picture of the old lady did it. Just got it. Now I'll use it for 6 months and get back to you for the review.
- webwit
- Wild Duck
- Location: The Netherlands
- Main keyboard: Model F62
- Favorite switch: IBM beam spring
- DT Pro Member: 0000
- Contact:
That would involve throwing it. I found it with the caps lock floating in the box, and the pcb hanging loose in the case with just one screw, the other is seemingly floating somewhere around in the keyboard, I can hear it but not see it. Some heavy throwing was involved. The outer box looks like gnomes gnawed at it.
- kidchunks
- Main keyboard: HHKB all day everyday!
- Main mouse: L-Trac
- Favorite switch: BS
- DT Pro Member: -
Same with UPS, I knew a guy who worked for one of their facilities during my HS days and he admitted to playing soccer with a few boxes.webwit wrote:Some heavy throwing was involved. The outer box looks like gnomes gnawed at it.
At least it arrived. Looking forward to that review.
- webwit
- Wild Duck
- Location: The Netherlands
- Main keyboard: Model F62
- Favorite switch: IBM beam spring
- DT Pro Member: 0000
- Contact:
So mine has only two screws. The pcb was attached to the upper left one (the other one on the left has a small plastic insert so you cannot put a screw there). I found the other screw and the metal part it screws into it in the case as shown here:
I presume it goes it the emply round cylinder at the bottom. That would make 5 screw holes. Problem is, the metal cylinder doesn't slide into it. It doesn't fit.
Looks like a part broke off? Or not?
Sixty, can you check if that's were it goes and if the metal cylinder should slide all the way to the bottom of the board, or whether a small plastic part broke off?
Note that the keyboard was packed in a plastic sleeve and I found no other parts.
I presume it goes it the emply round cylinder at the bottom. That would make 5 screw holes. Problem is, the metal cylinder doesn't slide into it. It doesn't fit.
Looks like a part broke off? Or not?
Sixty, can you check if that's were it goes and if the metal cylinder should slide all the way to the bottom of the board, or whether a small plastic part broke off?
Note that the keyboard was packed in a plastic sleeve and I found no other parts.
- webwit
- Wild Duck
- Location: The Netherlands
- Main keyboard: Model F62
- Favorite switch: IBM beam spring
- DT Pro Member: 0000
- Contact:
I found the third screw, stuck somewhere at the bottom of the box, hidden from view. Used the three screws in other locations, left out the loose metal bit, and it feels stable. Still wonder where it goes. Review tomorrow or the day after.
- webwit
- Wild Duck
- Location: The Netherlands
- Main keyboard: Model F62
- Favorite switch: IBM beam spring
- DT Pro Member: 0000
- Contact:
Ok I need to force more. It's probably a tight fit. I didn't pick anything. Hey this thing has dedicated arrow keys. Well, sort of.
- webwit
- Wild Duck
- Location: The Netherlands
- Main keyboard: Model F62
- Favorite switch: IBM beam spring
- DT Pro Member: 0000
- Contact:
So the bottom screw hole is only used as stabilizer/rest point? That would explain why it feels stable without it, because it is resting on the plastic now.
- turbocharged
- Main keyboard: Deck Legend Fire
- Main mouse: Mionix Naos 5000
- Favorite switch: Cherry MX Black
- DT Pro Member: -
So how did you guys get these anyway?
- webwit
- Wild Duck
- Location: The Netherlands
- Main keyboard: Model F62
- Favorite switch: IBM beam spring
- DT Pro Member: 0000
- Contact:
From KBC, this is good marketing for them.
- webwit
- Wild Duck
- Location: The Netherlands
- Main keyboard: Model F62
- Favorite switch: IBM beam spring
- DT Pro Member: 0000
- Contact:
I've been busy.. sometime this week. I like it though, much will depend on the price. I asked KBC about price and availability, no answer yet.
- webwit
- Wild Duck
- Location: The Netherlands
- Main keyboard: Model F62
- Favorite switch: IBM beam spring
- DT Pro Member: 0000
- Contact:
Finally.. sunlight. But wow my camera hates this keyboard. In terms of being able to capture it.