<SPRiT Edition>MX Springs +LSS Lube Station +MX Stabilizers (In stock)

[sprit1]

MX Custom Springs R3 - Direct Shipping by Air (Order Open)



Round 3 - In Stock ! Order Here > http://goo.gl/forms/Q6f7OtR5Al


IC for 55g, 85g Springs : http://goo.gl/forms/tSoTFlM3hB

GeekHack link : https://geekhack.org/index.php?topic=55888.0


Custom MX Springs : Latest v1.2 * copyright

I follow the Cherry Original Specs and GeekHack Standard, Not the narrow range of Local stuffs.
For my custom springs, I have added several private Tweaks, they start softer and mellow than stock ones.
I have been trying to apply the quality materials, minimize tolerances and variations working close with specialized factories.
As more steps and electrochemical processes involved, chances are there for some physical changes - Noticeable, or Not.
There have been reports my Springs feel different, softer, crisp, comfy, elastic. Well, I am not sure.
For the latest v1.2 springs, I have added reinforced exceptional surface smoothness. (Need minimal lube)

- My 45g - 50g Super-light edition. a little bit softer and lighter than MX Reds (55g) v1.2
- My 55g is similar to MX Reds but more tight and elastic, slightly lighter than MX Browns, MX Blues (58g-60g) v1.2
- My 60g is similar to MX Blues, but a little bit tighter and stable, elastic as some early vintage MX Blues v1.1
- My 62g is slightly heavier and tighter than MX Blues, the Ergo edition v1.2
- My 65g is soft, gentle, stable, heavier than MX Blues, the Ergo edition v1.1
- My 68g - 72g Vintage Black edition. similar to some Vintage MX Blacks, MX Greens, soft & cushiony v1.2
- My 75g is very similar to the current MX Black stocks v1.1
- My 78g is a Soft MX Clear Edition, softer & lighter than MX Clears, and same cushiony v1.2
- My 85g is similar to MX Clears. v1.0 starts little bit solid, v1.2 will start softer
- My 100g is similar to MX Gray tactiles in the MX Clears boards v1.2
- My 110g - 120g Super heavy v1.2
- My 135g - 150g Super-heavy v1.2

My References
- MX Blues : Vintage G80-1000, G80-3000 Blue, Dolch MX blue, New MX blue Switches
- MX Browns : Compaq 1838, 11800, Cherry 8200, 8113, 8955HPDUS, Reuters Switches
- MX Reds : Cherry G80-1867, G80-3497, Leopold, Philco, Corsair, CM Storm, etc
- MX Blacks : NCR G80-0528, Nixdorf, G80-0879, G80-0904, 1000HAD, 1501HAD, 1800HAG, 2551HAD, G80-11900
- MX Clears : G80-1819HEU, G80-8113, G80-9009HAU Reuters, G80-1800, G80-3000, New MX Clears

For Your Reference
Measurements https://geekhack.org/index.php?topic=55888.msg1295137 Lube Guide https://geekhack.org/index.php?topic=55888.msg1299429 http://imgur.com/a/nYWbK http://imgur.com/a/2vTc1

MX Stabs - Compared - Cherry OG & Custom Stainless & Gold-plated

MX Stabs - Compared - Cherry OG & Custom Stainless & Gold-plated 13(1) .JPG (975.88 KiB) Viewed 20702 times

[scottc]

In the "GH Username" section, I assume we should write username@deskthority?

When is the expected ship date?

[sprit1]

Oh! edited! You can join with any user name.

- Invoicing start : July 1st, (or, July 15th)
- Production start : July 15th~
- Inspection & Packing : from August 15th ~
- EMS Shipping : from August 15th, to the Proxy Helpers
- The re-packing and shipping by the Proxy Helpers to You : 7-10 days
- All Responsibilities are on me! (Not on the Proxy helpers)

[pyrelink]

Hey sprit, any chance I can confirm my order? Don't remember what I ordered/if everything went through and all that. Username is still pyrelink over there as well.

[sprit1]

Hey sprit, any chance I can confirm my order? Don't remember what I ordered/if everything went through and all that. Username is still pyrelink over there as well.

Can You Please send a new one again? Thanks!!

[pyrelink]

Resubmitted my order. Could you clarify:

"50g, 55g (18K Gold v1.1 high-glossy) , 70g, 75g, 85g (18K Gold v1.0 medium-glossy) : Only the Gold versions are available for the MOQ issue."

Are you saying that those have passed MOQ, only the gold are passed MOQ, or only the gold have not passed MOQ?

[sprit1]

MOQ Status Clarified.

[sprit1]

Invoicing Started.

Ordering & Payment by July 20th.

[shreebles]

I just submitted my order
Thank you very much for this GB. Looking forward!

[sprit1]

~400 sets Orders in Round 1 & 2 to EU members

[sprit1]

R2 Early EMS Shipped to some of EU members.

(50g, 55g, 60g, 62g, 65g, 68g, 70g, 75g : 18K Gold Ver Only) = I had made R2, v1.1 Samples already.

The other springs Started production Today.

[MrMen]

Hi, I think I ordered standard version of these. Will you produce it? If no can you upgrade my order to gold I'll complete the difference.

[sprit1]

Hi, I think I ordered standard version of these. Will you produce it? If no can you upgrade my order to gold I'll complete the difference.

Some Extra Sets of 50g, 55g, 60g, 62g, Ver 1.1 Shipped Just in case
Not 68g of Yours... Mr.E. Um...

[shreebles]

Hi, I think I ordered standard version of these. Will you produce it?

Me too! Did we not reach the MOQ on these or will standard springs come later?

[sprit1]

Standards and Some golds will come, after a Production!

Your 110pcs each v1.1 60g, 62g Standards will be produced by 15th August.

[sprit1]

EMS - 0722

For 50g 55g 60g62g 65g 68g 70g 75g Gold version Orders!

http://geekhack.org/index.php?topic=558 ... msg1410154

[sprit1]

EU Early EMS Ship Arrived in Norway.

mr. Epzy (Proxy Helper) will ship on Monday to some of EU members.


To Who ordered (50g, 55g, 60g, 62g, 65g, 68g, 70g, 75g : 18K Gold Only)
The other Standard & Gold springs have Started Production from 21th.

http://geekhack.org/index.php?topic=558 ... msg1410154

[sprit1]

fJ1G2WX.jpg (400.79 KiB) Viewed 22843 times

[scottc]

Are there any extra springs in the EU that I could get?

[sprit1]

Sure ! enough for my DT members

[scottc]

So if I place an order now for 1x65g + 1x62g now, there will be enough for me in the current package that is in the EU right now?

[sprit1]

Total 500 sets are Reserved for EU members for Round 2 .
No need to Worry Mr. !

[scottc]

Thanks! I've filled the form out now.

[scottc]

What is the status on these? It has been a month since I paid. You said that there would be enough for me in the current round's leftovers. Have I misunderstood something?

[DanielT]

The status is "in production", production should end around Aug 28 and after that it should start to ship the blink The stuff goes to an EU proxy and from the proxy to us.
There are more updates on GH about this, though lately sprit was less active also there, some job related stuff. Bottom line we will get the blink

[scottc]

Oh great, thanks a lot DanielT - you're basically my GH news proxy.

That's pretty disappointing, since (I think?) I was meant to be included in the round that shipped. I suppose I misunderstood the above messages. Sigh! Thanks anyway.

[DanielT]

The first round was for the early adopters, sprit had a small batch of springs produced.
This is the latest update on GH:

Update August 31th
Standard Springs : under Inspection, Sorting, Packing
Gold Springs : 70% Done! But Still under Gold-plating Factory, due to additional 62g, 78g, 100g, 120g added lately. Waiting for finalizing.
* Shipping to Each Proxy Host will be Next week. Sorry for the additional Delay!!

[cookie]

Are the 50g still available?

[DanielT]

I think you can still order, sprit made some extras. You can PM him or just try your luck and place an order if the form is still available

[DanielT]

Update from sprit yesterday

Hello Guys!
EMS to China, Vietnam, USA, Canada, Australia, EU shipped.
Packing for additional Sampler Kit made some more delay.

I am going to ship some left the independent Orders for Malaysia, Thailand, NZ. Please Give me time.
The PCB, Case combined Orders will ship soon, after collecting shipping cost.

I don't know who is proxy helper for EU last time it was epzy and the delivery time was fast from what I saw, hoping to get my springs soon