HyperMicro Development

[7bit]

Please discuss the technical issues of the HyperMicro here

HyperMicro_title.png (8.11 KiB) Viewed 9982 times

HyperMicro.png (490.01 KiB) Viewed 9988 times

Please suggest changes or demand a look at the files!

[chzel]

Looks good to me.
Mounting provisions? or is going to "hang" from the plate?

[rindorbrot]

I still hope for the HyperPoo!

[scottc]

Looks good to me.

[7bit]

I think I should add some holes. At least one for a pointing stick.


Plate designs come later ...

Other Hyper models will follow, but the smallest is the easiest for testing and cheapest for prototyping.

[scottc]

That's a very good idea. I've got a trackpoint module from an IBM Space Saver waiting for this! I'm just worried that the TP controller will be longer than the HyperMicro PCB.

[tlem]

Option to have usb connector on main pcb?
How about some indicator leds?
Some teensys come with both rows of pins presoldered - add pads for these even though they are not used.
PCB stab holes for shifts, but it might conflict with existing keys.
I like the gray pcb

[scottc]

Why do they say deskthority.org? Is it the non-profit charity version of Deskthority?

[Compgeke]

I think it's more like webwit went insane and bought all the available TLDs for deskthority at the time.

Now we need deskthority.xxx for keyboard internal pictures, just my opinion.

[scottc]

I know, just wondering why 7bit chose .org for the PCB rather than .net.

I agree about deskthority.xxx, maybe we can also get deskthority.club and .technology while we're at it?

[Muirium]

.org is better than .net says someone who's never registered a domain with the latter, because it feels redundant.

Besides, maybe 7bit slipped up, as he's actually working on this?

http://7bit.org

[7bit]

I know the website is hosted under deskthority.net and not under deskthority.org, but I always type deskthority.org automatically.

This is the prototype so it is supposed to have bugs.


BTW: I will add support for 4 and 7 units space bars (both plate or PCB mounted) and will make 2 PCBs for symmetric and traditional staggering.

[Muirium]

Ah, Hyper µ mode.

[matt3o]

can I have source files

[scottc]

7bit said to demand them, so maybe it would be better to ask like this:

GIVE ME THE SOURCE FILES!

[Laser]

.. or rather, add the request to you your order

[scottc]

You will receive them at some point in time from 3 months from now

On a serious note: can I please get a copy of the source files too?

[matt3o]

just to be clear, I can help making few prototypes.

[DanielT]

it depends on how long it will take you If you can do the prototypes in under 6 months you are not eligible

But enough joking, this is an interesting project and I would like to play with a 60% prototype maybe even with the Micro

[7bit]

7bit said to demand them, so maybe it would be better to ask like this:

GIVE ME THE SOURCE FILES!

Thanks!

This is demanding enough!


BTW:
Is 7mm diameter enough for a trackpopint-hole?

[matt3o]

can do prototypes in 30mins

[scottc]

BTW:
Is 7mm diameter enough for a trackpopint-hole?

I have a Trackpoint module from an IBM Space Saver, I can check dimensions later tonight.

[7bit]

... will make 2 PCBs for symmetric and traditional staggering.

No! Only one PCB for both staggerings.

[7bit]

can do prototypes in 30mins

How is that?

[Muirium]

http://deskthority.net/workshop-f7/firs ... t8479.html

[7bit]

HyperMicro_PCB_101.png (558.63 KiB) Viewed 9601 times

[Muirium]

Looks good… to my untrained eye.

[Findecanor]

It would be thick with the Teensy there. Why not have it one row up?

[7bit]

There isn't enough space.

The JD40 even has it in the bottom row!

[7bit]

OK, I had a thought about it:
Teensy must be turned 180 degrees and moved a bit towards the center (by a pad or so).

Then, 2 columns can be connected directly inside, 4 via the space on top and at least 4 through the space between row 3 and 2. It is possible to connect 2 columns through the bottom rows.

Row 3 and 2 are trivial, but row 1 and 0 should also be easy ...

OK, let's give it a try ...