Face U/MX-mini U replica, acrylic/alu plate, KEEP ORDERING

Shinryuu · 30 Aug 2014, 22:23

Well, I think it should be wise to continue this talk elsewhere so this won't turn into a support thread

Here's the image of my mapping, http://a.pomf.se/smwffv.png and I just want to use right shift as Fn only.

Also here's a pic of my board

beltet · 31 Aug 2014, 06:54

Hey tinnie!
Can I have my tracking number?

albill · 01 Sep 2014, 02:25

Is this still open?

I'd like to get:

Face U replica, support ISO, €30
Aluminium plate (support ISO) for face U, €19

iAmAhab · 02 Sep 2014, 00:44

beltet wrote: ↑Hey tinnie!
Can I have my tracking number?

M2 please.

Laser · 02 Sep 2014, 17:24

iAmAhab wrote: ↑
beltet wrote: ↑Hey tinnie!
Can I have my tracking number?
M2 please.

Same for me please - if possible.

plasticchair · 02 Sep 2014, 17:50

Laser wrote: ↑
iAmAhab wrote: ↑
beltet wrote: ↑Hey tinnie!
Can I have my tracking number?
M2 please.
Same for me please - if possible.

Same, getting way too excited.

Madhias · 02 Sep 2014, 22:11

Got my package today:

beltet · 02 Sep 2014, 23:00

MrMen wrote: ↑It's really simple doing it like I did. I took only 10s.
Here are the pictures.
http://imgur.com/5g6pC9J
http://imgur.com/Dykhs6s

Nice!
If you do this, what size will the shift be?
And if your not going to use a FN right if the rshift. Do you need to do this mod?

MrMen · 03 Sep 2014, 07:48

No I think there is no need of this hack if you use a big rshift. To be sure test it without wire

Paranoid · 03 Sep 2014, 08:00

Is ordering still open?
If so I'll take the following:
Face U replica, support ISO, €30
Acrylic plate (support ISO) for Face U, €7

tinnie · 03 Sep 2014, 08:17

Actually I shipped all the orders already. But I'm very busy at this moment so it will take a while for me to send the tracking number. Sorry about that!

beltet · 03 Sep 2014, 13:18

tinnie wrote: ↑Actually I shipped all the orders already. But I'm very busy at this moment so it will take a while for me to send the tracking number. Sorry about that!

NP, take the time you need. I'm just anxious and want to know where it is

btw, which postal service do you use? HK post?

MrMen wrote: ↑No I think there is no need of this hack if you use a big rshift. To be sure test it without wire

I thought so to, but wanted to certain. That key is the last on that row right?

beltet · 03 Sep 2014, 13:27

Shinryuu wrote: ↑Well, I think it should be wise to continue this talk elsewhere so this won't turn into a support thread
Here's the image of my mapping, http://a.pomf.se/smwffv.png and I just want to use right shift as Fn only.

Also here's a pic of my board

What size of screws do you use?

DanielT · 03 Sep 2014, 13:36

Created http://deskthority.net/workshop-f7/face ... t8689.html in the Workshop area, so we can post there technical stuff

DanielT · 03 Sep 2014, 17:48

received our stuff

the quality of the PCB's is very good and they are quite heavy, really good product.
started the asembly on my first one

thanks tinnie

beltet · 03 Sep 2014, 19:49

Got the keyboard today aswell. Feels good. But the aluminium plate was slighty bendt but with a little handforce it was straight again.
Thanks for this GB!

ClaudiaJ · 04 Sep 2014, 01:33

Today I received both my red Face and my Poker II w/ Clears!

I suppose I don't need any tracking information anymore, but I did chip in the extra for tracking. Next GB maybe I get a treat, yeah?

Nuum · 05 Sep 2014, 13:19

So, I just got my FaceU PCB and the aluminium plate. The plate has been severely bent on the top right corner (where Esc is), but it was fixable, although it doesn't look good.
Also I noticed that there are holes for only three screws in the plate, whereas the PCB has several more spots for screws. Is it save/normal to have just three screws in a Poker-like case?

Concerning tracking: My order has been delivered by the German mail (Deutsche Post), so I had to track it on their website and not on the DHL website.

Edit: Sorry, my mistake, there are actually five mounting points, if you have plate. That should be fine then.

matt3o · 05 Sep 2014, 13:21

I don't even know if mine has been shipped or it is waiting for the missing PCB. Well I guess it will show up one day or another.

mashby · 05 Sep 2014, 16:32

matt3o wrote: ↑I don't even know if mine has been shipped or it is waiting for the missing PCB. Well I guess it will show up one day or another.

Looks like I'm in the same boat. At least I have good company.

matt3o · 05 Sep 2014, 17:36

it can't take more than GH60

tinnie · 05 Sep 2014, 18:11

I shipped all the face u D:

frankbartoli · 05 Sep 2014, 18:29

Thanks tinnie, it arrived. Now i need to solder only switches you agree?

tinnie · 05 Sep 2014, 18:31

frank: yes.

DanielT · 05 Sep 2014, 18:35

frankbartoli wrote: ↑Thanks tinnie, it arrived. Now i need to solder only switches you agree?

If you look a few posts back I posted a link to the Workshop thread for faceU, feel free to join us

YUIOP · 06 Sep 2014, 22:55

Got mine today.
For some reason, my acrylic plate didn't come with the protective layer on either side and it's got some minor scratches and smudges. Not a big deal, but it's still a bit of a bummer

HzFaq · 06 Sep 2014, 23:00

Got mine today as well, typing on it as we speak. I'll get some pics up tomorrow, but overall I'm really happy with this.

edit -

Duncaen · 08 Sep 2014, 19:17

Received my PCB and Acrylic plate today, thanks tinnie

A small part of the acrylic plate where the ESC key is broke off, but i think its no problem.

beltet · 08 Sep 2014, 21:32

HzFaq wrote: ↑Got mine today as well, typing on it as we speak. I'll get some pics up tomorrow, but overall I'm really happy with this.

edit -
Spoiler:

Looks real good!

collector of junk · 09 Sep 2014, 15:38

mine still hasn't arrived !
I live in the uk will it be by parcelforce ?
hope everything ok but as I'm missing an ebay item too think somethings gone wrong
fingers crossed

update everythings ok was left at neighbours and no card put though