IDENTIFY THE KEYBOARD thread

User avatar
guk
1896 Vintage Reds

01 Oct 2015, 12:00


User avatar
Chyros

01 Oct 2015, 13:42

Ooh look, it's got the fatass enter! Never seen that board though.

User avatar
seebart
Offtopicthority Instigator

01 Oct 2015, 13:45

I've seen that before. Even here I believe. Fujitsu leaf spring 3rd gen. I like the looks of it. :P

User avatar
ramnes
ПБТ НАВСЕГДА

01 Oct 2015, 13:50

That Sanyo board is really a nice board, I hesitated to get multiple times. As seebart said, it has Futjitsu Lead Spring which, if you like linears, are just awesome. The metal case make it even better.

User avatar
jou

01 Oct 2015, 16:42


User avatar
guk
1896 Vintage Reds

01 Oct 2015, 16:45

Would expect white Alps or clones. Don't remember the model rumber though.

User avatar
Chyros

01 Oct 2015, 16:52

Is that a Unitek K-248? Probably white Alps in that case.

User avatar
jou

01 Oct 2015, 17:06

Thanks, guk and Chyros. My hunch that it might be something interesting was right :)

User avatar
derzemel

01 Oct 2015, 17:10

Are you sure it's ALPS?

I am asking because the keyboard seems to be fairly thin, (see this image of the bottom) which makes me to suspect rubber domes

User avatar
guk
1896 Vintage Reds

01 Oct 2015, 17:21

No, just guessing based on its looks; don't think there's a way to know for sure unless the seller provides a pic with a pulled keycap. Good objection Derzemel.

User avatar
chzel

01 Oct 2015, 17:29

Also there are a lot of screws in the back, and that usually means RD...

andrewjoy

01 Oct 2015, 18:22

Yeh i was going to say it has a whiff of the dome about it.

User avatar
jou

01 Oct 2015, 22:05

Damn, there goes my hopes :) I'll see if the seller is willing to pull a cap…

terrycherry

11 Oct 2015, 17:11

What's thar switch about the vintage Russian keyboard?
http://www.ebay.com/itm/VINTAGE-USSR-CO ... 0997697920

User avatar
seebart
Offtopicthority Instigator

11 Oct 2015, 17:57

terrycherry wrote: What's thar switch about the vintage Russian keyboard?
http://www.ebay.com/itm/VINTAGE-USSR-CO ... 0997697920
Slight yellowing on those caps... :o or is that filth? :?

andrewjoy

11 Oct 2015, 20:30

looks more like varnish

User avatar
Scottex

11 Oct 2015, 22:20

I found an NMB RT102, could it be mech?
The thing that irks me is that the fcc = AQGMEMB 74004
Could that memb be a coincidence or i have no luck?

User avatar
Chyros

11 Oct 2015, 22:30

Scottex wrote: I found an NMB RT102, could it be mech?
The thing that irks me is that the fcc = AQGMEMB 74004
Could that memb be a coincidence or i have no luck?
There are mech RT102's apparently: http://deskthority.net/review-f45/nmb-r ... t8469.html

User avatar
Scottex

11 Oct 2015, 22:37

Chyros wrote:
Scottex wrote: I found an NMB RT102, could it be mech?
The thing that irks me is that the fcc = AQGMEMB 74004
Could that memb be a coincidence or i have no luck?
There are mech RT102's apparently: http://deskthority.net/review-f45/nmb-r ... t8469.html
I have seen that, but the fact that it says memb in the fcc scares me, i dont want to pay for a rubberdome
And the guy says he wont pull a keycap T_T

User avatar
Muirium
µ

11 Oct 2015, 23:17

Yeah, I doubt this one is a space invader. Doesn't look much like my RT102, and that MEMB on the label is a deadly hint!

terrycherry

12 Oct 2015, 08:16

Scottex wrote: I found an NMB RT102, could it be mech?
The thing that irks me is that the fcc = AQGMEMB 74004
Could that memb be a coincidence or i have no luck?
Yes,it's 100% rubber dome. I have collected lots of NMB Hi-tek details and keyboard for half year, never seen this FCCID "AQ6MEMB-74004" have the space invader version. The seller knows that's the rubber dome,so he did't tell you the correct FCCID to you.
http://www.pcdistrict.com/store/Vintage ... 05710.html

terrycherry

13 Oct 2015, 11:05

Which that Sharp teletypewriter switch is?
09.jpg
09.jpg (62.16 KiB) Viewed 7803 times
And I found another different unknown switch that Sharp teletypewriter has.
Image
http://writelephant.com/2014/07/19/the- ... r-schmuck/

terrycherry

15 Oct 2015, 19:06

Identified myself.
00.jpg
00.jpg (40.88 KiB) Viewed 7785 times
Last edited by terrycherry on 19 Dec 2020, 06:05, edited 2 times in total.

User avatar
guk
1896 Vintage Reds

15 Oct 2015, 19:10

It's alps mount, slider over domes as you might've guessed already.

terrycherry

15 Oct 2015, 19:14

guk wrote: It's alps mount, slider over domes as you might've guessed already.
Thanks for id it. I never seen this switch over dome before. Did you have any keyboard photo or site with that switch?

User avatar
guk
1896 Vintage Reds

15 Oct 2015, 19:29

Sent you a picture, it's an early sord switch by Alps which was used for e.g. typewriters.

User avatar
stratokaster

15 Oct 2015, 19:33

Muirium wrote: I'd post a full pictures thread, if I had any more pictures. But this is it. One phone pic from a friend of a friend in Kazakhstan:
Kazakh.jpeg
Apparently it's at her parents place, and they say it's from the 1980s. I know nothing more.

Obviously relegendable, and a bit of an oddball what with the tiny, offset "spacebar"! Wouldn't surprise me if it's a microcomputer of some kind.
I know I'm late to the party, but it's a homemade soviet clone of Sinclair ZX Spectrum.

terrycherry

15 Oct 2015, 19:41

guk wrote: Sent you a picture, it's an early sord switch by Alps which was used for e.g. typewriters.

I can't find any information on DT wiki, you should put some details if necessary. ;)

User avatar
Scottex

15 Oct 2015, 20:27

terrycherry wrote:
guk wrote: It's alps mount, slider over domes as you might've guessed already.
Thanks for id it. I never seen this switch over dome before. Did you have any keyboard photo or site with that switch?
usually, if a keyboard has Alps mount but the switch doesn't look like an Alps one it means slider over rubber dome

andrewjoy

15 Oct 2015, 21:41

usually slider over domes are not 1/2 bad, not something to lust over but passable. Something does not have to be true mechanical to be good , look at Trope.

Post Reply

Return to “Keyboards”