so, no extra transfers or anything ?wafflepc wrote:My bad, thought i replied, accidentally left a draft. Nothing is wrong!samhwang wrote: ↑Hey WafflePC
just curious, is there anything wrong with my order ? I contacted you a long while ago regarding postage but you didnt reply.
ANSI & ISO GON JD40 styled plate/case (MOSTLY SHIPPED)
-
- Location: Melbourne, Australia.
- Main keyboard: CM Storm Novatouch, Filco MF2
- Main mouse: Cyborg RAT 7 & RAT 9
- Favorite switch: Cherry MX Red + Topre 45g
- DT Pro Member: -
-
- Location: Ithaca, NY, USA
- Main mouse: g502, kinda want a new one.
- Favorite switch: gateron Blue/Clear
- DT Pro Member: -
Check pmsamhwang wrote:so, no extra transfers or anything ?wafflepc wrote:My bad, thought i replied, accidentally left a draft. Nothing is wrong!samhwang wrote: ↑Hey WafflePC
just curious, is there anything wrong with my order ? I contacted you a long while ago regarding postage but you didnt reply.
- drrtyrokka
- Location: Bavaria, Germany
- Main keyboard: Ducky Shine III, Ducky G2Pro TKL
- Main mouse: Logitech G602; Anker Optical Vertical Mouse
- Favorite switch: Ergo Clear 62g
- DT Pro Member: -
- Contact:
Here in Germany, I am still waiting for my two plates, too.
-
- Location: Ithaca, NY, USA
- Main mouse: g502, kinda want a new one.
- Favorite switch: gateron Blue/Clear
- DT Pro Member: -
Ok, sorry for the delays. All of the people who are overseas, ordered multiple plates, or ordered ISO have not been shipped yet. It is also the holidays, where shipping takes a day or two longer, and i am shipping economy because of the sheer number. i am very sorry for the amount of time it took to order them in the first place, but i assure you that they will arrive before the new year if you are in the US. I am very busy on mondays, wednesdays, and fridays, so i cant ship on those days or even package them. I am also not really able to respond to PMs or reply to this forum on those days. I will be on top of this forum on thursday to. I am very sorry for the delay.
-
- Main keyboard: 60%
- Main mouse: G602
- Favorite switch: 62g Linears
- DT Pro Member: -
Thanks for the update!
So for those of us who ordered a single set and are in the US, should we assume they've been shipped out?wafflepc wrote: ↑All of the people who are overseas, ordered multiple plates, or ordered ISO have not been shipped yet.
-
- Location: Ithaca, NY, USA
- Main mouse: g502, kinda want a new one.
- Favorite switch: gateron Blue/Clear
- DT Pro Member: -
Most likely. I have a large pile sitting next to me of packaged plates, and there might be a few left in there.
-
- Main keyboard: CM Novatouch
- Main mouse: Steelseries Sensei
- Favorite switch: Topre
- DT Pro Member: -
That means that if you bought just one ANSI plate but from overseas (Europe in my case) it's most likely that it got shipped?wafflepc wrote: ↑Ok, sorry for the delays. All of the people who are overseas, ordered multiple plates, or ordered ISO have not been shipped yet. It is also the holidays, where shipping takes a day or two longer, and i am shipping economy because of the sheer number. i am very sorry for the amount of time it took to order them in the first place, but i assure you that they will arrive before the new year if you are in the US. I am very busy on mondays, wednesdays, and fridays, so i cant ship on those days or even package them. I am also not really able to respond to PMs or reply to this forum on those days. I will be on top of this forum on thursday to. I am very sorry for the delay.
EDIT: Nvm I read it wrong. I guess more waiting then...
-
- Location: Ithaca, NY, USA
- Main mouse: g502, kinda want a new one.
- Favorite switch: gateron Blue/Clear
- DT Pro Member: -
I have sent out all that i have proper information on. There are about 3 that i dont expect to get a reply on, and then 2 that i do within the next week, and then i have 1 that i just got information for. Everyone elses is shipped!
-
- Main keyboard: Ergodox
- Main mouse: Zowie FK1
- Favorite switch: custom tactile
- DT Pro Member: -
got mine today too. this is probably a couple pounds of plates!
-
- Main keyboard: poker 3
- Main mouse: logitech g602
- Favorite switch: cherry black
- DT Pro Member: -
Mine arrived as well. Looks even better in person!
-
- Main keyboard: poker 3
- Main mouse: logitech g602
- Favorite switch: cherry black
- DT Pro Member: -
Huston, we have a problem.Looks like the spacing between the f row and number row is off. you van see in the photo that the holes for the function row are out of alignment with the hole in the plate. the rest of the keyboard seems to line up nice, but the f row is too close to the others. anyone else having this problem? if not, can someone with a phantom pcb measure the distance between the f row and the number row on their pcb? this is the only non-60% kyboard I have, so I am not able to do any testing. Thanks!
- Attachments
-
- stainlessphoto.jpg (31.9 KiB) Viewed 7355 times
- FreeCopy
- Location: AZ, US
- DT Pro Member: -
studyourheart wrote: ↑Huston, we have a problem.Looks like the spacing between the f row and number row is off. you van see in the photo that the holes for the function row are out of alignment with the hole in the plate. the rest of the keyboard seems to line up nice, but the f row is too close to the others. anyone else having this problem? if not, can someone with a phantom pcb measure the distance between the f row and the number row on their pcb? this is the only non-60% kyboard I have, so I am not able to do any testing. Thanks!
You're right. It is quite a bit off unfortunately. Everything else lines up perfectly.
Also, if it matters, I have ANSI.
Here's an image of it lined up with another Phantom plate I have:
-
- Main keyboard: CM Novatouch
- Main mouse: Steelseries Sensei
- Favorite switch: Topre
- DT Pro Member: -
Well shit. What can we do now?
- Spaceman1200
- Location: Westland, Michigan
- Main keyboard: IBM Model F122
- Main mouse: Nixeus Revel
- Favorite switch: Tactile/Clicky
- DT Pro Member: -
Plates would work with a hand wiring job, but i doubt anyone wants to deal with that.
- drrtyrokka
- Location: Bavaria, Germany
- Main keyboard: Ducky Shine III, Ducky G2Pro TKL
- Main mouse: Logitech G602; Anker Optical Vertical Mouse
- Favorite switch: Ergo Clear 62g
- DT Pro Member: -
- Contact:
Come on ... really?!
- Parod
- Main keyboard: Infinity
- Main mouse: WMO 1.1
- Favorite switch: Clear
- DT Pro Member: -
wafflepc wrote: ↑Phantom, but others will work I believe. I'm pretty sure the gonkeyboards pcb will. If it uses a teensy 2.0 then it should work.sethk wrote:What TKL PCB is this designed for?
studyourheart wrote: ↑Huston, we have a problem.Looks like the spacing between the f row and number row is off...
- LeandreN
- Location: ISO Nordic
- Main keyboard: Skidata 60%
- Main mouse: MX Master
- Favorite switch: i like tactile, and linear, and clicky
- DT Pro Member: -
Hey mates!
I just saw the issue. I am not the designer or GB runner, so i have no responsebility for this, but i thought i would let you know what the files that i recieved were.
Here is the plate, as i got the file, beside the standard ANSI 100% plate.
Here i put it on top on the other plate
The plate was simply not designed correctly and is not a factory issue. Just thought to let you guys now. I hope WafflePC will be back with something.
Contact me everytime you want,
LeandreN
I just saw the issue. I am not the designer or GB runner, so i have no responsebility for this, but i thought i would let you know what the files that i recieved were.
Here is the plate, as i got the file, beside the standard ANSI 100% plate.
Here i put it on top on the other plate
The plate was simply not designed correctly and is not a factory issue. Just thought to let you guys now. I hope WafflePC will be back with something.
Contact me everytime you want,
LeandreN
-
- Main keyboard: CM Novatouch
- Main mouse: Steelseries Sensei
- Favorite switch: Topre
- DT Pro Member: -
Yeah specially since for example I got a GON PCB and have been waiting just for the case for a long time.Spaceman1200 wrote: ↑Plates would work with a hand wiring job, but i doubt anyone wants to deal with that.
What I thought is maybe hand wiring to the PCB only those switches but not sure how that would work...
-
- Main keyboard: Filco Majestouch TKL
- Main mouse: Razer Naga 2014
- Favorite switch: MX Browns
- DT Pro Member: -
I was checking in on this thread and saw the alignment issues. So I checked my pcb and it is fine. I popped in a few switches too
- Parod
- Main keyboard: Infinity
- Main mouse: WMO 1.1
- Favorite switch: Clear
- DT Pro Member: -
Nice! It looks like us winkeyless/GON pcb users can sigh in relief (I'm pretty sure they're the same). But the phantom PCB still won't fit...keysmasher wrote: ↑I was checking in on this thread and saw the alignment issues. So I checked my pcb and it is fine. I popped in a few switches too
I actually never noticed the difference in layouts until now. Weird.
-
- Main keyboard: poker 3
- Main mouse: logitech g602
- Favorite switch: cherry black
- DT Pro Member: -
so it's simply a phantom issue? that's not so bad. seems strange though that gon/winkeyless are different spacing there. so only big problem here is with phantoms at this point? any other non-phantom people able to confirm?/
-
- Main keyboard: CM Novatouch
- Main mouse: Steelseries Sensei
- Favorite switch: Topre
- DT Pro Member: -
Holy crap, I feel so lucky that I went for the GON PCB then. Hope that everyone that got a Phantom PCB finds a solution.Parod wrote: ↑Nice! It looks like us winkeyless/GON pcb users can sigh in relief (I'm pretty sure they're the same). But the phantom PCB still won't fit...keysmasher wrote: ↑I was checking in on this thread and saw the alignment issues. So I checked my pcb and it is fine. I popped in a few switches too
I actually never noticed the difference in layouts until now. Weird.