Post your deskthority header images here
- Muirium
- µ
- Location: Edinburgh, Scotland
- Main keyboard: HHKB Type-S with Bluetooth by Hasu
- Main mouse: Apple Magic Mouse
- Favorite switch: Gotta Try 'Em All
- DT Pro Member: µ
Well, so long as it's a symmetrical gap. The slight mismatch in angles is obscured by the Y's thickness. When separated it would be much more obvious.
- seebart
- Offtopicthority Instigator
- Location: Germany
- Main keyboard: Rotation
- Main mouse: Steelseries Sensei
- Favorite switch: IBM capacitive buckling spring
- DT Pro Member: 0061
- Contact:
Test.
As usual there's not enough room on the left for the logo, so without cheating this is the only way:
As usual there's not enough room on the left for the logo, so without cheating this is the only way:
Last edited by seebart on 13 Feb 2016, 16:21, edited 1 time in total.
- Muirium
- µ
- Location: Edinburgh, Scotland
- Main keyboard: HHKB Type-S with Bluetooth by Hasu
- Main mouse: Apple Magic Mouse
- Favorite switch: Gotta Try 'Em All
- DT Pro Member: µ
- seebart
- Offtopicthority Instigator
- Location: Germany
- Main keyboard: Rotation
- Main mouse: Steelseries Sensei
- Favorite switch: IBM capacitive buckling spring
- DT Pro Member: 0061
- Contact:
Haha I was hoping you wouldn't notice. But the postion is good in the last one. And yes I did some "logo background contrast improvment".
- Muirium
- µ
- Location: Edinburgh, Scotland
- Main keyboard: HHKB Type-S with Bluetooth by Hasu
- Main mouse: Apple Magic Mouse
- Favorite switch: Gotta Try 'Em All
- DT Pro Member: µ
If I don't notice the cheat, then it was done artfully! That one was not…
Comparing them all again just now, I still prefer your first attempt.
Comparing them all again just now, I still prefer your first attempt.
- seebart
- Offtopicthority Instigator
- Location: Germany
- Main keyboard: Rotation
- Main mouse: Steelseries Sensei
- Favorite switch: IBM capacitive buckling spring
- DT Pro Member: 0061
- Contact:
Come on, the second one is good. It's got much less cheating too.
What? Oh well I'm done with it now. Take your pick.Muirium wrote: ↑Comparing them all again just now, I still prefer your first attempt.
- Muirium
- µ
- Location: Edinburgh, Scotland
- Main keyboard: HHKB Type-S with Bluetooth by Hasu
- Main mouse: Apple Magic Mouse
- Favorite switch: Gotta Try 'Em All
- DT Pro Member: µ
The first one (which I reposted at the top of this page) is more organic. You know, what with the absence of later cheating. And I like the subtle way the logo shows up on it. We don't always need max contrast. The DT graphic shows well on many pale backgrounds, so long as they aren't highly patterned.
- seebart
- Offtopicthority Instigator
- Location: Germany
- Main keyboard: Rotation
- Main mouse: Steelseries Sensei
- Favorite switch: IBM capacitive buckling spring
- DT Pro Member: 0061
- Contact:
Fine. Reminds me to get my Cherry G80-0499 out. Time for some vintage MX action.
- Prelim
- Location: Portugal
- Main keyboard: GH60 rev.C, DS3 TKL, Dolch PAC, OG Cherry stuff
- Main mouse: Deathadder
- Favorite switch: 65g custom Cherry/Gats linear and still ISO lover!
- DT Pro Member: -
- seebart
- Offtopicthority Instigator
- Location: Germany
- Main keyboard: Rotation
- Main mouse: Steelseries Sensei
- Favorite switch: IBM capacitive buckling spring
- DT Pro Member: 0061
- Contact:
So do I, but the dictator has spoken. No use to fight it.
- Muirium
- µ
- Location: Edinburgh, Scotland
- Main keyboard: HHKB Type-S with Bluetooth by Hasu
- Main mouse: Apple Magic Mouse
- Favorite switch: Gotta Try 'Em All
- DT Pro Member: µ
You'll have to try harder to convince that mean spirited bastard in charge of picking headers. Reasons why, to balance against his own vile sense of aesthetic purity. The demon!
- seebart
- Offtopicthority Instigator
- Location: Germany
- Main keyboard: Rotation
- Main mouse: Steelseries Sensei
- Favorite switch: IBM capacitive buckling spring
- DT Pro Member: 0061
- Contact:
Madhias HHKB fading light shot:
- Madhias
- BS TORPE
- Location: Wien, Austria
- Main keyboard: HHKB
- Main mouse: Wacom tablet
- Favorite switch: Topre and Buckelings
- DT Pro Member: 0064
- Contact:
I am feeling guilty for never doing any crops!
- seebart
- Offtopicthority Instigator
- Location: Germany
- Main keyboard: Rotation
- Main mouse: Steelseries Sensei
- Favorite switch: IBM capacitive buckling spring
- DT Pro Member: 0061
- Contact:
No because you took the picture! That's the harder part IMO. This image also has great header potential.Madhias wrote: ↑I am feeling guilty for never doing any crops!
- Muirium
- µ
- Location: Edinburgh, Scotland
- Main keyboard: HHKB Type-S with Bluetooth by Hasu
- Main mouse: Apple Magic Mouse
- Favorite switch: Gotta Try 'Em All
- DT Pro Member: µ
Uploading these:
Or how about my own simple shrink of Slom's original pic? Aha. I see the angle was just a happy accident after all!
Which crop do you guys prefer of Madhias' sunset HHKB?
The first works better now I test it. They're both my own crops, after none of Seebart's looked quite right to me!
And still more Madhias?
Ooof! I'm out of practice! Need so much more desk space on the left of these. Denied!
Will update with more as I process them.
Or how about my own simple shrink of Slom's original pic? Aha. I see the angle was just a happy accident after all!
Which crop do you guys prefer of Madhias' sunset HHKB?
The first works better now I test it. They're both my own crops, after none of Seebart's looked quite right to me!
And still more Madhias?
Ooof! I'm out of practice! Need so much more desk space on the left of these. Denied!
Will update with more as I process them.
- ohaimark
- Kingpin
- Location: USA
- Main keyboard: Siemens G80 Lookalike
- Main mouse: Logitech G502
- Favorite switch: Blue Alps
- DT Pro Member: 1337
I see a slight lack of Depth of Field (inconsequential, and maybe it's just confirmation bias), but not really any serious grain... The header resolution is so low that seeing grain would be difficult in a downsampled photo anyways.
Still worth using as a header in my opinion.
Still worth using as a header in my opinion.
- Prelim
- Location: Portugal
- Main keyboard: GH60 rev.C, DS3 TKL, Dolch PAC, OG Cherry stuff
- Main mouse: Deathadder
- Favorite switch: 65g custom Cherry/Gats linear and still ISO lover!
- DT Pro Member: -
true!Khers wrote: ↑I think those G80-0499 pics are too noisy, grainy and poorly focused, but maybe that's just me?
- seebart
- Offtopicthority Instigator
- Location: Germany
- Main keyboard: Rotation
- Main mouse: Steelseries Sensei
- Favorite switch: IBM capacitive buckling spring
- DT Pro Member: 0061
- Contact:
You're right, compare the two in Mu's last post, I already did some GIMP magic on that top one. I don't mind if we do not use it. I think that picture is aesthetically pleasing, the image quality itself is poor though.Khers wrote: ↑I think those G80-0499 pics are too noisy, grainy and poorly focused, but maybe that's just me?
- seebart
- Offtopicthority Instigator
- Location: Germany
- Main keyboard: Rotation
- Main mouse: Steelseries Sensei
- Favorite switch: IBM capacitive buckling spring
- DT Pro Member: 0061
- Contact:
I agree, ask him for a reshoot if you like:Khers wrote: ↑I agree that it is aesthetically pleasing, but it cries out for a reshoot!
slom-u5173/
Since I own a G80-0499 I could reshoot it myself but I would find that somewhat rude towards Slom.
- seebart
- Offtopicthority Instigator
- Location: Germany
- Main keyboard: Rotation
- Main mouse: Steelseries Sensei
- Favorite switch: IBM capacitive buckling spring
- DT Pro Member: 0061
- Contact:
Well you know Mu we all have to look at those headers too every once in a while, some of us on a daily basis. Of course it can't hurt to look smart for the rest of the planet.
- Muirium
- µ
- Location: Edinburgh, Scotland
- Main keyboard: HHKB Type-S with Bluetooth by Hasu
- Main mouse: Apple Magic Mouse
- Favorite switch: Gotta Try 'Em All
- DT Pro Member: µ
I'm honestly pleased some of my dictatorial nitpicking is spreading to you guys. While I like Slom's composition, the original image is pretty crap, as I found out when editing it myself. So close to greatness!
Anyway, I'll wait for new submissions before upping another batch. Wound up falling asleep last night instead of finalising those. Needs a clear eye to make the final call, not a dozy one.
Anyway, I'll wait for new submissions before upping another batch. Wound up falling asleep last night instead of finalising those. Needs a clear eye to make the final call, not a dozy one.
- seebart
- Offtopicthority Instigator
- Location: Germany
- Main keyboard: Rotation
- Main mouse: Steelseries Sensei
- Favorite switch: IBM capacitive buckling spring
- DT Pro Member: 0061
- Contact:
Last one is nice lolpes. On the other two I'd move the keyboard to the right to make room for the DT logo.
-
- Location: UK
- Main mouse: Logitech MX Master
- Favorite switch: Vintage Clears
- DT Pro Member: -
I agree, I tried the preview and I liked the third one.seebart wrote: ↑Last one is nice lolpes. On the other two I'd move the keyboard to the right to make room for the DT logo.
I will try to move the board to the right on the other 2 and see if it works out
- Muirium
- µ
- Location: Edinburgh, Scotland
- Main keyboard: HHKB Type-S with Bluetooth by Hasu
- Main mouse: Apple Magic Mouse
- Favorite switch: Gotta Try 'Em All
- DT Pro Member: µ
Yup. The action has to be on the right. Just see how broken my own crops earlier (of Madhias' HHKB) look because I didn't compensate enough for the logo. Ouch!
-
- Location: UK
- Main mouse: Logitech MX Master
- Favorite switch: Vintage Clears
- DT Pro Member: -
Yeah I see what you mean muirium :/, I was trying to show the constrast of the cyan enter, but because it is located at the right of the board, in order to show background on the right I probably would have to take a far away pic in order to get the board rotated and still have enough background to show the DT logo...hum I'll give it a try, tomorrow, ligh here is going away now xD