Round 4 / packing (99.8%) / shipping (99.7%)

kwin1337 · 14 Dec 2011, 02:41

Hi 7bit I've sent you my order, when can I expect a confirmation?
How does the whole payment/shipping work?

Half-Saint · 14 Dec 2011, 07:43

7bit wrote:
Half-Saint wrote:How about those missing g80-1800 keys? There's just a few of them, see PM

You only need:
DELETE, END, NEXT for row 1, minus for row 2, plus for row 3 and slashed zero for row 4.

Or are the other keys missing?

Aha, will check today, need to dig up those Round 3 keys.. only God knows where I put them!

7bit · 14 Dec 2011, 08:53

Half-Saint wrote:Aha, will check today, need to dig up those Round 3 keys.. only God knows where I put them!

You should pm him ...

Lamaboi · 14 Dec 2011, 08:55

Spherical TKL order sent. Btw, why are both shifts and enter key a bit shorter on the SPH sets?

Half-Saint · 14 Dec 2011, 10:24

7bit wrote:
Half-Saint wrote:Aha, will check today, need to dig up those Round 3 keys.. only God knows where I put them!
You should pm him ...

I don't think he is a registered member

kps · 14 Dec 2011, 16:28

Lamaboi wrote:Spherical TKL order sent. Btw, why are both shifts and enter key a bit shorter on the SPH sets?

SP does not have molds in the correct sizes in the spherical style.

: SAFamily.png (8.81 KiB) Viewed 4994 times

7bit has said there will (may?) be a full-length RETURN available in a different finish. I personally plan to use "reverse ISO" shift keys, but one could also just move them inward an eighth. Rectangular layouts are overrated.

Half-Saint · 14 Dec 2011, 20:09

7bit wrote:
Half-Saint wrote:How about those missing g80-1800 keys? There's just a few of them, see PM

You only need:
DELETE, END, NEXT for row 1, minus for row 2, plus for row 3 and slashed zero for row 4.

Or are the other keys missing?

I searched through the boxes and I can't find the keys anywhere. Grmbl. To answer your question, no, the other keys are not missing. Would it be possible just to order the keys in question (DELETE, END, PGDN for row 1, minus for row 2, plus for row 3 and slashed zero for row 4)?

Thanks

7bit · 14 Dec 2011, 20:17

Half-Saint wrote:I searched through the boxes and I can't find the keys anywhere. Grmbl. To answer your question, no, the other keys are not missing. Would it be possible just to order the keys in question (DELETE, END, PGDN for row 1, minus for row 2, plus for row 3 and slashed zero for row 4)?

Thanks

I don't need these, so I will give them to you.

Please remind me to add the slashed 0 somewhere.

7bit · 14 Dec 2011, 20:22

BTW:

I got a price quote from SP and it says that everything is a bit more expensive than I thought.

Just multiply 1.5 to the prices.

I will update the price lists as soon as possible.

Just call it inflation and order more to get rid of you soon worthless money!

€ $ £ ¥ ?*

All money will be bad toilet paper!!!

------------
*) To order these, please submit a message to 7bit_R4 with the lines:
SPH/NUMERIC
ROUND3/NUMERIC

Tarkoon · 14 Dec 2011, 20:33

x1.5? That's REALLY BAD! =(

Half-Saint · 14 Dec 2011, 21:06

7bit wrote:
Half-Saint wrote:I searched through the boxes and I can't find the keys anywhere. Grmbl. To answer your question, no, the other keys are not missing. Would it be possible just to order the keys in question (DELETE, END, PGDN for row 1, minus for row 2, plus for row 3 and slashed zero for row 4)?

Thanks
I don't need these, so I will give them to you.

Please remind me to add the slashed 0 somewhere.

Just to clear things up, did I place a wrong order in Round 3?

Key profiles of the keys that I got are for a G80-3000 type board. That's what my whining is all about

7bit · 14 Dec 2011, 21:36

No, the stuff you want was not available in Round 3.

Half-Saint · 14 Dec 2011, 21:38

Alrighty. Thanks for the explanation.

Lamaboi · 14 Dec 2011, 21:43

7bit wrote:Just multiply 1.5 to the prices.

Well that's a bummer.

7bit · 14 Dec 2011, 22:35

Lamaboi wrote:
7bit wrote:Just multiply 1.5 to the prices.
Well that's a bummer.

I will axe away some of the styles I don't like for myself and then everybody will order my remaining crap and we get it for cheaper than last time.

mintberryminuscrunch · 15 Dec 2011, 10:26

that's just really bad timing
my mobile phone is killing me and i desperatly need to replace it.
not sure if most of my order will survive the budget cut

7bit · 15 Dec 2011, 16:34

mintberryminuscrunch wrote:that's just really bad timing
my mobile phone is killing me and i desperatly need to replace it.
not sure if most of my order will survive the budget cut

Mobile phones cost only 1 EUR.

Half-Saint · 16 Dec 2011, 08:03

Stop using the mobile phone! It will rot your brain!

Minskleip · 16 Dec 2011, 08:46

Half-Saint wrote:Stop using the mobile phone! It will rot your brain!

Not if you put doubleshots on them

Half-Saint · 16 Dec 2011, 08:56

Still have no idea where I put the rest of my Round 3 doubleshots. Bah!

Nask · 16 Dec 2011, 12:35

I didn't resist enough but much better than the Round3.
Ordered couple awesome keys and blank rgb

mintberryminuscrunch · 22 Dec 2011, 21:45

Q: is white or pearlwhite pbt blank closer to the cherry pbt dyesubs?

Kurk · 23 Dec 2011, 08:43

Hi 7bit,
what's the shape of the BLANK/RxU200V keys? For instance, will the top of a BLANK/R3U200V be in line with row 3 and its bottom in line with row 4 keys? Or will if fit rows 2 and 3? What about BLANK/R1U200V and BLANK/R4U200V ?

zoidbergslo · 23 Dec 2011, 09:37

Are blank PBT prices final or do you have to edit those price lists too?

7bit · 23 Dec 2011, 10:11

zoidbergslo wrote:Are blank PBT prices final or do you have to edit those price lists too?

I will have to go throuigh them as well. Prices depend on quantity so if there are only a few ordered of some quantity, price will go up. I plan to calculate prices automatically, depending on how much had been ordered, so I don't need to edit the pricelist manually every time.

pederlol · 23 Dec 2011, 10:23

It seems that 7bit_r4 won't accept the following:

RETRO/STDRGBY125DK 1
ORANJE/STDRGBY125DK 1

Am I doing something wrong?

zoidbergslo · 23 Dec 2011, 10:38

7bit wrote:
zoidbergslo wrote:Are blank PBT prices final or do you have to edit those price lists too?
I will have to go throuigh them as well. Prices depend on quantity so if there are only a few ordered of some quantity, price will go up. I plan to calculate prices automatically, depending on how much had been ordered, so I don't need to edit the pricelist manually every time.

Thanks. No point in ordering blank PBT dolch like set then since I would be only one

7bit · 23 Dec 2011, 19:15

pederlol wrote:It seems that 7bit_r4 won't accept the following:

RETRO/STDRGBY125DK 1
ORANJE/STDRGBY125DK 1

Am I doing something wrong?

These are the choices:

Code: Select all

SPH/TERMINALDK     |158|117|Terminal DK kit (120-126 keys)
TERMINALDK         |156|120|Terminal DK kit (120-126 keys)
SPH/STANDARDDK     |138|114|Standard DK kit (101-104 keys)
STANDARDDK         |137|115|Standard DK kit (101-104 keys)
STDSYMDK           |137|130|Standard Symbols DK kit (101-104 keys)
STDRGBYDK          |137|149|Standard RGBY DK kit (101-104 keys)
BLOOD/STDRGBYDK    |137|139|Standard RGBY DK kit (101-104 keys)
SPH/STANDARD125DK  |115| 90|Standard DK kit (104 keys)
STANDARD125DK      |116| 90|Standard DK kit (104 keys)
STANDARD150DK      |113| 90|Standard DK kit (101 keys)
SPH/TENKLESSDK     |108| 88|Tenkless DK kit ( 84- 87 keys)
TENKLESSDK         |109| 90|Tenkless DK kit ( 84- 87 keys)
SPH/TKLDK          | 93| 69|TKL DK kit (87 keys)
TKLDK              | 93| 70|TKL DK kit (87 keys)
TKLSYMDK           | 93| 79|TKL Symbols DK kit (87 keys)
BLOOD/TKLRGBYDK    | 93| 79|TKL RGBY DK kit (87 keys)
TKLRGBYDK          | 93| 85|TKL RGBY DK kit (87 keys)
TKLALNUMDK         | 57| 38|TKL Alnum DK kit (101-104 keys)
TKLMODDK           | 36| 42|TKL Modifier DK kit (101-104 keys)
SPH/ALPHAR3DK      | 39| 21|A-Z and Punctuation keys DK (all row 3)
SPH/ALPHADK        | 54| 34|A-Z and Punctuation keys DK 
ALPHADK            | 54| 34|A-Z and Punctuation keys DK 
STDALNUMDK         | 72| 48|Standard Alnum DK kit (101-104 keys)
SPH/DK             | 24| 16|Danish language kit
DK                 | 24| 21|Danish language kit

Kurk · 27 Dec 2011, 18:09

Kurrk wrote:Hi 7bit,
what's the shape of the BLANK/RxU200V keys? For instance, will the top of a BLANK/R3U200V be in line with row 3 and its bottom in line with row 4 keys? Or will if fit rows 2 and 3? What about BLANK/R1U200V and BLANK/R4U200V ?

any news on this

rindorbrot · 27 Dec 2011, 18:17

Hey there,
I updated my order a couple times in the last few days and haven't got any updated mail (last mail I got is from 25th Dec.)
So I just wanted to ask if the Script hasn't run since then or if it's my fault and I did something wrong...