IDENTIFY THE KEYBOARD thread

[Redmaus]

That's surprising. 4chan usually isn't very helpful

[Crazy Canadian XXIV]

That's surprising. 4chan usually isn't very helpful

To their credit, they did manage to identify this beauty.

[ohaimark]

Hearing that 'board called beautiful just went a long way toward making my day.

[gogusrl]

He's not the only one loving it

[bricomaz]

Hi all! First time poster here...
I found this (and others keyboard on a e-waste dump yesterday but I cannot pull a single keycap to identify what kind of switches it uses. The pcb started to bend and i don't want to break it! I suspect they are some kind of Alps (I can see the stem is white if this can help) Is it possible that keycaps are somewhat glued to the switch?!? Is it normal for Alps keycaps to be so hard to pull out?

Anyway here are the pictures:

http://imgur.com/a/l8psB

can anybody help me? I really would like to clean it...

[Muirium]

Pull harder. Alps can be real tight, just like that. Try the Control keys. They'll give you most leverage and no stabs to worry about.

[gogusrl]

also wiggle it left and right a bit while pulling. Remember, just a bit, maybe 30degrees tops.

[bricomaz]

Thanks for the answers! I will try (harder ) this evening.

[scottc]

Always remember when pulling keycaps: don't apply a lot of force upwards, just move it side to side. Eventually it'll give. The tightest caps always do.

[Chyros]

No don't move Alps from side to side, they'll snap off! Only pull straight up, use a keypuller. Specifically says so in the Omnikey manual!

[XMIT]

If you pull Space Invaders straight up a spring goes flying. If you pull NEC Blue Ovals straight up you break the switch housing and there is no way to repair it.

If you pull Key Tronic Foam and Foil to the side you break the thin vertical legs under the key cap.

This is clearly Alps or some Alps clone. Wiggle side to side as you pull up. If you can, wedge between the top of the switch housing and the underside of the key cap to reduce the risk of ripping the slider out. Good luck.

[ohaimark]

Speaking of Space Invaders... Does this board have them? I did some Googling already and didn't manage to find anything definitive. The font is odd, in any case.

http://www.ebay.com/itm/141815525234

[gogusrl]

Guys on irc already ruined my dreams telling me it's a rubberdome but I require additional confirmation before I give up on such beauties.

[bricomaz]

Just for the record: you ALL that replied to me were right! I managed to pull off the CTRL key, wiggling a bit, using a self made keypuller Alps (clone?) switches.

[Blaise170]

Yep clones of some kind, you can tell easily by the four tabs on the side instead of two tabs. Maybe Tai Hao or Fuhua.

[terrycherry]

[Single board computer]trainer／evaluation board with numeric pad(20keys)
It's from the China seller. when I mention to buy this, it sold.
Hope someone can id this switch. Maybe it should made from the China manufacturer, it seems like my China desktop calculater.

01.jpg (82.24 KiB) Viewed 5044 times

02.jpg (60.19 KiB) Viewed 5044 times

[scottc]

I got a really strange thing in the post today. Anyone any idea what it could be? Linear-ish in feel, a bit scratchy when you hit it off-center. The keys are sorted into modules that are screwed on to the back (!).

1.jpg (628.86 KiB) Viewed 5018 times

4.jpg (691.97 KiB) Viewed 5018 times

3.jpg (715.87 KiB) Viewed 5018 times

2.jpg (713.29 KiB) Viewed 5018 times

5.jpg (760.03 KiB) Viewed 5018 times

[Muirium]

You weren't expecting it?

[ohaimark]

It's a magnetic reed keyboard. I had a similar one a while back. Looks like a clone of higher quality versions that were floating around at the time.

[scottc]

You weren't expecting it?

Curse of the Phantom Keyboard! No, I was expecting it. I wasn't expecting it to be so weird though!

It's a magnetic reed keyboard. I had a similar one a while back. Looks like a clone of higher quality versions that were floating around at the time.

Ah, not bad. Thanks.

It reads DIGIPOINTO INDUSTRIA BRASILEIRA. Can't find much about them online apart from this: http://www.jusbrasil.com.br/diarios/319 ... 08-03-1983

[ohaimark]

wiki/Key_Tronic_Corp._Magnetic_Reed

Here are the switches that I saw a resemblance in.

[Muirium]

Ah, Brasil. They banned foreign IT imports down there throughout the 80s, which led to Brazil having a thriving computer market… of locally manufactured clones! Apple IIs, PCs, Macs, and their keyboards.

Brazil's still weird about foreign goods. Apple gear is super costly there. They've thought of building a Brazilian factory to cover South America as a whole. But Shenzen is Shenzen…

[Blaise170]

Anyone know more about this?

http://www.ebay.com/itm/321810765231

[domvar]

Hi there I hope you don't mind me hopping on to your wonderful forum to ask a quick question. Over on a doctor who props board we are trying to Identify this keyboard, any one have any ideas, sadly this image is all we have to go on.

[Blaise170]

I don't know the exact model but it's probably an old Micro Switch keyboard from the 70's/80's. Here's an example:



P.S. Do you mind linking the thread? Seems like an interesting read.

[domvar]

I don't know the exact model but it's probably an old Micro Switch keyboard from the 70's/80's. Here's an example:



P.S. Do you mind linking the thread? Seems like an interesting read.

Thanks, no problem,

http://tardisbuilders.com/index.php?top ... n#msg82362

[domvar]

Looks like I have gone round in a circle as my pic is already here in another thread

[Blaise170]

I found one even more similar. This might be similar to what you are looking for.

[amospalla]

Any idea what keyboard is this?

[ohaimark]

The strip below the Function keys looks Focus-ish to me.