Alright, let me know if you want to try the silenced Novatouch.
I see it now, looked darker in the picture. I have the Vortex PBT too, but in side-print! I need to get back to you in a few months because I want to know how well the top-print version holds up over time. I was worried that it might discolor within a few weeks from finger oils.
ISO - obviously. Me too. We must not bow to american standards. Big Enter and small Shift for Lyfe.
Post your keyboard/keycaps!
-
Thumper
- knock knock
- Location: Germany > NRW
- Main keyboard: Whitefox
- Main mouse: Razer Deathadder Chroma
- Favorite switch: Linear Zealios | Vintage Blacks
- DT Pro Member: -
- Contact:
I already ordered some Dichtungsringe for dampening, same size as Hyperspheres but only 10€;)shreebles wrote:Alright, let me know if you want to try the silenced Novatouch.
I see it now, looked darker in the picture. I have the Vortex PBT too, but in side-print! I need to get back to you in a few months because I want to know how well the top-print version holds up over time. I was worried that it might discolor within a few weeks from finger oils.
ISO - obviously. Me too. We must not bow to american standards. Big Enter and small Shift for Lyfe.
-
shreebles
- Finally 60%
- Location: Cologne, Germany
- Main keyboard: FaceW 45g Silent Red /NerD60 MX Red
- Main mouse: Logitech G303 / GPro (home) MX Anywhere 2 (work)
- Favorite switch: Silent Red, Old Browns, Buckling Spring,
- DT Pro Member: 0094
Yes, indeed good luck to you. Are you certain it will work, Thumper?
The guys at computerbase.de said they tried all kinds, and even ran a group buy for some very small Dichtungsringe.
The result was less than satisfactory, the rings just wouldn't stay on.
They have to fit snugly to stay on, while at the same time being very very thin. That is why most people (myself included) resort to either dental bands (pic) or Hyper's pads.
The guys at computerbase.de said they tried all kinds, and even ran a group buy for some very small Dichtungsringe.
The result was less than satisfactory, the rings just wouldn't stay on.
They have to fit snugly to stay on, while at the same time being very very thin. That is why most people (myself included) resort to either dental bands (pic) or Hyper's pads.
-
Redmaus
- Gotta start somewhere
- Location: Near Dallas, Texas
- Main keyboard: Unsaver | 3276 | Kingsaver
- Main mouse: Kensington Slimblade
- Favorite switch: Capacitative Buckling Spring
- DT Pro Member: -
- Contact:
Respect the trackball. What board is that? It looks quite suave.
-
seebart
- Offtopicthority Instigator
- Location: Germany
- Main keyboard: Rotation
- Main mouse: Steelseries Sensei
- Favorite switch: IBM capacitive buckling spring
- DT Pro Member: 0061
- Contact:
Working on the Olympia People Fujitsu keyboard now, full teardown coming soon.
- IMG_20160308_170641.jpg (907.99 KiB) Viewed 15368 times
-
Thumper
- knock knock
- Location: Germany > NRW
- Main keyboard: Whitefox
- Main mouse: Razer Deathadder Chroma
- Favorite switch: Linear Zealios | Vintage Blacks
- DT Pro Member: -
- Contact:
Just received some keycaps which fits perfect my double shot German cherry OG keycaps
-
photekq
- Cherry Picker
- Location: United Kingdom
- Main keyboard: Various Cherry Corp keyboards
- Main mouse: Razer Deathadder (1st gen)
- Favorite switch: Nixdorf 'Soft Touch' MX Black (55g springs)
- DT Pro Member: -
- Contact:
There were three reasons I was looking forward to going home.. Seeing my parents, eating my mums cooking, and getting to see all the keyboards that have arrived since I've been gone 
This is definitely the biggest mailday I've had!
Filco Zero with taihao caps. It's got the fake white alps in it now (which are surprisingly nice) but I'll be trying to replace them with blue alps as soon as I can!
A Cherry G81-3026SAQ with Greek dyesubs. I love the Greek alphabet, and I love Cherry dyesubs, so I was overjoyed when I got this one. Also, since it's a Schneider (they always used the same modifier legends, regardless of layout) there are some pretty unique modifier caps here! I've never seen a 2.25u dyesub shift with only an icon before..
A Cherry G80-1824HAU. I've fantasized over this board for years!
My first SSK. And a good one at that..
A Cherry G80-3000HEG from 1990. The first truly vintage clears I've tried.
A beamspring controller, solenoid controller and a bunch of Cherry/IBM cables.
An awfully dirty Apple split keyboard. Usually I wouldn't have been interested in this, but I got it for £5 off ebay
A new Tandberg G84 (ML switch), 3000 metal plate, Cherry catalogue and OTD RA from Sixty.
A new in (smashed) foam model M from 1988.
This beauty. The machining quality is absurdly high. I can absolutely recommend yuktsi's customs to anyone.
And I got these crappy old boxes and keyboards too...
This is definitely the biggest mailday I've had!Filco Zero with taihao caps. It's got the fake white alps in it now (which are surprisingly nice) but I'll be trying to replace them with blue alps as soon as I can!
A Cherry G81-3026SAQ with Greek dyesubs. I love the Greek alphabet, and I love Cherry dyesubs, so I was overjoyed when I got this one. Also, since it's a Schneider (they always used the same modifier legends, regardless of layout) there are some pretty unique modifier caps here! I've never seen a 2.25u dyesub shift with only an icon before..
A Cherry G80-1824HAU. I've fantasized over this board for years!
My first SSK. And a good one at that..
A Cherry G80-3000HEG from 1990. The first truly vintage clears I've tried.
A beamspring controller, solenoid controller and a bunch of Cherry/IBM cables.
An awfully dirty Apple split keyboard. Usually I wouldn't have been interested in this, but I got it for £5 off ebay
A new Tandberg G84 (ML switch), 3000 metal plate, Cherry catalogue and OTD RA from Sixty.
A new in (smashed) foam model M from 1988.
This beauty. The machining quality is absurdly high. I can absolutely recommend yuktsi's customs to anyone.
And I got these crappy old boxes and keyboards too...
Last edited by photekq on 20 Mar 2016, 16:28, edited 1 time in total.
-
seebart
- Offtopicthority Instigator
- Location: Germany
- Main keyboard: Rotation
- Main mouse: Steelseries Sensei
- Favorite switch: IBM capacitive buckling spring
- DT Pro Member: 0061
- Contact:
Quite impressive phote! The Schneider is the nicest of the lot for me.
Last edited by seebart on 20 Mar 2016, 19:45, edited 1 time in total.
-
pcaro
- Location: Seville, Spain
- Main keyboard: SSK,Novatouch
- Main mouse: Logitech M510, Slimblade
- Favorite switch: blucking spring
- DT Pro Member: -
- Contact:
I fell for that Schneider!
-
Madhias
- BS TORPE
- Location: Wien, Austria
- Main keyboard: HHKB
- Main mouse: Wacom tablet
- Favorite switch: Topre and Buckelings
- DT Pro Member: 0064
- Contact:
I enjoyed looking through this massive post, photekq!
-
seebart
- Offtopicthority Instigator
- Location: Germany
- Main keyboard: Rotation
- Main mouse: Steelseries Sensei
- Favorite switch: IBM capacitive buckling spring
- DT Pro Member: 0061
- Contact:
Well as usual I have nothing on photekq but at least my doubleshots are older, thicker and crunchier.
- IMG_20160320_214603.jpg (970.85 KiB) Viewed 15037 times
- IMG_20160320_214451.jpg (970.75 KiB) Viewed 15037 times
-
photekq
- Cherry Picker
- Location: United Kingdom
- Main keyboard: Various Cherry Corp keyboards
- Main mouse: Razer Deathadder (1st gen)
- Favorite switch: Nixdorf 'Soft Touch' MX Black (55g springs)
- DT Pro Member: -
- Contact:
I bought it 2 years ago!ramnes wrote: ↑Did you buy that G84 with hopes to make sixty come back? Because I don't see any other reason to buy such a thing...
Seebart yours contends very well! That board is an absolute beauty. I actually would have bought it if it weren't for the missing key and my OCD!
Last edited by photekq on 20 Mar 2016, 23:36, edited 1 time in total.
-
E3E
- Location: United States
- Main keyboard: Blue, Neon Green, Striped Amber, Cream Alps, Topre
- Main mouse: Logitech, Topre
- Favorite switch: Alps, Topre
- DT Pro Member: -
That texture, though! Jeez. Extremely classy key caps. You never see texture quite that strong these days.seebart wrote: ↑Well as usual I have nothing on photekq but at least my doubleshots are older, thicker and crunchier.
-
Khers
- ⧓
- Location: Sweden
- Main keyboard: LZ CLSh
- Main mouse: Logitech MX Ergo
- Favorite switch: Buckling Springs | Topre | Nixdorf Black
- DT Pro Member: 0087
Wow, that is quite some stuff to come back to, photekq. Amazing.
And the texture on the caps on your board, seebart, is simply stunning! Interesting to see that it is a German layout keyboard, but qwerty, rather than qwertz, and I do have a soft spot for those mods.
And the texture on the caps on your board, seebart, is simply stunning! Interesting to see that it is a German layout keyboard, but qwerty, rather than qwertz, and I do have a soft spot for those mods.
-
Redmaus
- Gotta start somewhere
- Location: Near Dallas, Texas
- Main keyboard: Unsaver | 3276 | Kingsaver
- Main mouse: Kensington Slimblade
- Favorite switch: Capacitative Buckling Spring
- DT Pro Member: -
- Contact:
Holy crap!photekq wrote: ↑There were three reasons I was looking forward to going home[...]
[...]
This beauty. The machining quality is absurdly high. I can absolutely recommend yuktsi's customs to anyone.
That looks so nice. Too bad its Cherry though(I can tell by the mounts) I would love to have a wonder like that in alps. What case is that on your Filco Zero? I just ordered a red TEX case for my V80.
-
photekq
- Cherry Picker
- Location: United Kingdom
- Main keyboard: Various Cherry Corp keyboards
- Main mouse: Razer Deathadder (1st gen)
- Favorite switch: Nixdorf 'Soft Touch' MX Black (55g springs)
- DT Pro Member: -
- Contact:
It's just the standard case on the Zero Redmaus
