Phantom Custom Keyboard Group Buy (CLOSED)

[7bit]

Are the mod/fun keycaps still going ahead; they aren't on my order anymore?

7bit_R4 will take care of these.

[mintberryminuscrunch]

Are diodes included in the "prepacked" Phantoms?

if you mean the kits, then yes

[HzFaq]

Sweet, thanks.

[7bit]

Are diodes included in the "prepacked" Phantoms?

Yes:
PCB, controller, 2 white LEDs 2 resistors, a mount plate and 100 switches plus 100 diodes and as many stabilisers as you need.

If you want extras, just add them to the order.

Code: Select all

PHANTOM.........86
TEENSY..........92
PH7BIT..........19
PHANSI..........29
PHANSIWIN.......19
PHISO............7
PHISOWIN.........9
DIODE.........9007
MXBLACK........458
MXBLUE........1150
MXBROWN.......2081
MXCLEAR.......4607
MXDARKGREY......63
MXGREEN........782
MXGREY........1064
MXRED.........3636



.




.

Greens are now 0.5 EUR or $0.65 .

Now please order some more blacks and those MXDARKGREY of which I don't know if they are available.

[Swede]

This will be awesome to put together! May be a bit hard to do as it is my first time soldering on a bigger scale. But you need to start somewhere

Should get cracking on the case design me thinks!

[7bit]

Moar orders for black to get the lower prcie for them too!

Code: Select all

MXBLACK........458
MXBLUE........1155
MXBROWN.......1971
MXCLEAR.......4634
MXDARKGREY......70
MXGREEN........888
MXGREY........1169
MXRED.........3636

I can maybe further reduce the switch prices for the higher volumes (MXCLEAR and MXRED).

[Ekaros]

Moar orders for black to get the lower prcie for them too!

Code: Select all

MXBLACK........458
MXBLUE........1155
MXBROWN.......1971
MXCLEAR.......4634
MXDARKGREY......70
MXGREEN........888
MXGREY........1169
MXRED.........3636

I can maybe further reduce the switch prices for the higher volumes (MXCLEAR and MXRED).

Hmm, so I can get more blues then?

[7bit]

Sure, as many as you want!

[gimpster]

Now please order some more blacks and those MXDARKGREY of which I don't know if they are available.

Apparently my MXGREY switches from a previous message got dropped from the order, as the email I got to day didn't have them. Resubmitting now to help with the numbers.

[7bit]

I had thrown them out because there where so few ordered. Then some came up and wanted to organise a group buy. As usual I absorbed it.

[gimpster]

I had thrown them out because there where so few ordered. Then some came up and wanted to organise a group buy. As usual I absorbed it.

You're like The Blob, consuming all group buys that you can!

[Ekaros]

I had thrown them out because there where so few ordered. Then some came up and wanted to organise a group buy. As usual I absorbed it.

Are you some sort of group-buy borg/ameba/vampire?

[gimpster]

I had thrown them out because there where so few ordered. Then some came up and wanted to organise a group buy. As usual I absorbed it.

Are you some sort of group-buy borg/ameba/vampire?

The correct xenological term is: glutton for punishment

[Swede]

If I break my promise I'll be consumed by the entity that is 7bit, and be forced to make groupbuys for all eternity.

I need to sleep...

[litster]

resistors: both resistors and LEDs will be included in each PCB order. Sorry for not being more clear earlier.

As much as people complaint about 7bit's order system, I come to appreaicate it very much in a large group buy like this one. Without 7bit and his scripts, I would be swapped with orders in my PM inbox today.

Thank you, 7bit!

Oh, and I LOL'ed when I read this:

Fuck you 7bit... I'm taking an order xD

[The_Ed]

I had thrown them out because there where so few ordered. Then some came up and wanted to organise a group buy. As usual I absorbed it.

Hey... That was me!

"MXGREY........1169" - Holy shit!... I had less than 400 ordered, including my 110! Apparently I should have tried to organize it here.

[litster]

7bit is a babe order magnet!!

[litster]

Most of the world is already in February. USA East Coast is in February as well. I guess everyone still have a couple more hours to get their last orders in before 7bit runs his script one more them and closes the group buy.

Thank you all for your support of the Phantom project so far! Please bear with us while we tally the orders, collect money, and get the parts ordered. The heavy lifting work will soon begin for the Phantom team!

Keep the questions coming! And start studying the Phantom Instruction wiki here: http://deskthority.net/wiki/Phantom_Instruction

Maybe order some soldering tools and keycaps from 7bit's group buy to get ready.

[7bit]

Code: Select all

PHANTOM..........91
TEENSY...........98
PH7BIT...........22
PHANSI...........31
PHANSIWIN........21
PHISO.............7
PHISOWIN..........9
DIODE.........10093
MXBLACK.........472
MXBLUE.........1220
MXBROWN........1987
MXCLEAR........4596
MXDARKGREY.......84
MXGREEN........1404
MXGREY.........1211
MXRED..........3960
STAB200.........260
STAB625..........30
STAB700..........46










.

.

You can still order.

I will send out invoices in the evening.

[dirge]

wish i had the knowledge to join you guys on this.

if anyone makes a few I'd love to see one up for auction.

[Ascaii]

added some more diodes to my order...quick FYI for anyone ordering the ERGODOX, that design uses the same diodes as here.

[litster]

wish i had the knowledge to join you guys on this.

if anyone makes a few I'd love to see one up for auction.

dirge, you can still order before 7bit runs his invoice script this evening as he wrote earlier. I am going to bed soon, but if you have questions on what and how to order, people here will help you out. You have a few more hours to order. Hurry up!

added some more diodes to my order...quick FYI for anyone ordering the ERGODOX, that design uses the same diodes as here.

Is ERGODOX ready to accept orders? I haven't been following that thread as much.

[Ascaii]

I don't think there is as difinite answer to that...but the thread is going strong and there are a lot of people interested, so we might actually get below 300$ per board. Im ordering extra diodes just in case^^.

[Tarkoon]

I'm thinking about ordering some more switches, but the pricelist doesn't show prices anymore...

[litster]

I'm thinking about ordering some more switches, but the pricelist doesn't show prices anymore...

7bit posted the last price list on the previous page:

Just a few hours and you can only buy a few leftovers!

Please order now!

Here is the latest pricelist:

Code: Select all

TEENSY           |  1|   18|Teensy controller
PHANTOM          |  1|   35|Phantom PCB
PHANSI           |  1|   15|mount plate ANSI
PHANSIWIN        |  1|   15|mount plate ANSI with WIN keys
PHISO            |  1|   15|mount plate ISO
PHISOWIN         |  1|   15|mount plate ISO  with WIN keys
PH7BIT           |  1|   15|mount plate 7BIT
MXRED            |  1|  0.6|MX red   plate mount switch (0.45 EUR)
MXBLUE           |  1|  0.6|MX blue  plate mount switch (0.45 EUR)
MXBROWN          |  1|  0.6|MX brown plate mount switch (0.45 EUR)
MXCLEAR          |  1|  0.6|MX clear plate mount switch (0.45 EUR)
MXBLACK          |  1|  0.9|MX black plate mount switch (0.7  EUR)
MXGREEN          |  1|  0.9|MX green plate mount switch (0.7  EUR)
MXGREY           |  1|  0.65|MX grey  plate mount switch (0.5 EUR)
MXDARKGREY       |  1|  1  |MX grey  plate mount switch (0.8  EUR)
DIODE            |  1| 0.01|n-key rollover diode
RESISTOR         |  2|  0.1|Resistor
STAB200          |  1|  2.5|Costar 2    units stabiliser
STAB625          |  1| 2.75|Costar 6.25 units stabiliser
STAB700          |  1|    3|Costar 7    units stabiliser
PHANSIREDKIT     |  1|  142|Teensy/PCB/ANSI plate/MX red   with stabs
PHANSICLEARKIT   |  1|  142|Teensy/PCB/ANSI plate/MX clear with stabs
PHANSIBLACKKIT   |  1|  162|Teensy/PCB/ANSI plate/MX black with stabs
PHANSIBLUEKIT    |  1|  162|Teensy/PCB/ANSI plate/MX blue  with stabs
PHANSIBROWNKIT   |  1|  142|Teensy/PCB/ANSI plate/MX brown with stabs
PHISOREDKIT      |  1|  140|Teensy/PCB/ISO  plate/MX red   with stabs
PHISOCLEARKIT    |  1|  140|Teensy/PCB/ISO  plate/MX clear with stabs
PHISOBLACKKIT    |  1|  160|Teensy/PCB/ISO  plate/MX black with stabs
PHISOBLUEKIT     |  1|  160|Teensy/PCB/ISO  plate/MX blue  with stabs
PHISOBROWNKIT    |  1|  140|Teensy/PCB/ISO  plate/MX brown with stabs
PHANSIWINREDKIT  |  1|  140|Teensy/PCB/ANSI Win plate/MX red   with stabs
PHANSIWINCLEARKIT|  1|  140|Teensy/PCB/ANSI Win plate/MX clear with stabs
PHANSIWINBLACKKIT|  1|  160|Teensy/PCB/ANSI Win plate/MX black with stabs
PHANSIWINBLUEKIT |  1|  160|Teensy/PCB/ANSI Win plate/MX blue  with stabs
PHANSIWINBROWNKIT|  1|  140|Teensy/PCB/ANSI Win plate/MX brown with stabs
PHISOWINREDKIT   |  1|  140|Teensy/PCB/ISO  Win plate/MX red   with stabs
PHISOWINCLEARKIT |  1|  140|Teensy/PCB/ISO  Win plate/MX clear with stabs
PHISOWINBLACKKIT |  1|  160|Teensy/PCB/ISO  Win plate/MX black with stabs
PHISOWINBLUEKIT  |  1|  160|Teensy/PCB/ISO  Win plate/MX blue  with stabs
PHISOWINBROWNKIT |  1|  140|Teensy/PCB/ISO  Win plate/MX brown with stabs
SHIPUS           |  1| 17.5|Shipping costs within US
SHIPEU           |  1|   22|Shipping costs within EU (17 EUR)
SHIPDE           |  1|    9|Shipping costs within DE  (7 EUR)
SHIPNO           |  1|   39|Shipping costs to NO, CH (30 EUR)
SHIPIL           |  1|   47|Shipping costs to Israel (36 EUR)
SHIPKO           |  1|   55|Shipping costs to Korea  (42 EUR)
SHIPUNINSURED    |  1|    9|Shipping costs un-insured (<1kg) (7 EUR)

[7bit]

wish i had the knowledge to join you guys on this.

if anyone makes a few I'd love to see one up for auction.

Just send a message to Phantom with order-IDs followed by a space, followed by quantity, followed by a newline.
Add your email address in a single line and send it off. Can't be less difficult!

[dirge]

Wow, thanks for the quick reply guys.

I'd like to find some Cherry UK ISO doubleshots to put on this, will they fit this layout? 1.5

Please tell me if I have this right? I've added a bunch of switches to basically see if I like any, silly I know but may end up even using some, you never know.

To: Phantom

PHISOBROWNKIT 1
MXRED 2
MXBLUE 2
MXBROWN 2
MXCLEAR 2
MXBLACK 2
MXGREEN 2
MXGREY 2
MXDARKGREY 2

[zoidbergslo]

PHISO150 is mounting plate You need to add stabilizers. STAB700 1 (for 7unit space) but I have no idea how many STAB200 you need (one in backspace, one in right shift, dunno about iso enter and left shift)

[dirge]

So what about this instead of the phisobrownkit? Does that make sure that I get the cherry 1.5 spacing right to use the doubleshots?

TEENSY 1
PHANTOM 1
PHISO150 1
STAB700 1
STAB200 5
DIODE 100
MXRED 90
MXRED 2
MXBLUE 2
MXBROWN 2
MXCLEAR 2
MXBLACK 2
MXGREEN 2
MXGREY 2
MXDARKGREY 2

[7bit]

Wow, thanks for the quick reply guys.

I'd like to find some Cherry UK ISO doubleshots to put on this, will they fit this layout? 1.5

Please tell me if I have this right? I've added a bunch of switches to basically see if I like any, silly I know but may end up even using some, you never know.

To: Phantom

PHISOBROWNKIT 1
MXRED 2
MXBLUE 2
MXBROWN 2
MXCLEAR 2
MXBLACK 2
MXGREEN 2
MXGREY 2
MXDARKGREY 2

Yeah perfect!