I will do some tests and build up one with the SMD parts and the Atmel controller. If someone wants to join me with testing the board, we will arrange something (decent soldering/programming skills needed).
[IC] n3rdpad (was: MX-Keypad)
-
aaron
- Location: Germany (Karlsruhe)
- Main keyboard: Noppoo Choc Mini
- Main mouse: Roccat Kova[+], CST
- Favorite switch: MX-Brown mit O-Rings
- DT Pro Member: -
- Contact:
Ok, I've sent the PCB to the board house a coule of weeks ago and today, I've got some nice package
I will do some tests and build up one with the SMD parts and the Atmel controller. If someone wants to join me with testing the board, we will arrange something (decent soldering/programming skills needed).
I will do some tests and build up one with the SMD parts and the Atmel controller. If someone wants to join me with testing the board, we will arrange something (decent soldering/programming skills needed).
- Attachments
-
- nerdpad.jpg (151.43 KiB) Viewed 2291 times
-
duynguyenle
- Location: UK
- Main keyboard: Cooler Master MasterKeys Pro L
- Main mouse: Logitech G502
- Favorite switch: MX Brown
- DT Pro Member: -
I would be very interested in this, more so if I can pay extra to get pre-assembled board with components soldered, as I am not very confident with a soldering iron.
-
Miko
- Location: u1h2fm
- Main keyboard: Traditional Thinkpad/Ergodox
- Main mouse: Trackpoint/Vertical Mouse
- Favorite switch: Model F
- DT Pro Member: -
If you want to use it as a macro pad, maybe consider buying relegeable keycaps. 
group-buys-f50/tipro-cherry-compatible- ... 13964.html
Sorry, this is the only advisement I'll make.
group-buys-f50/tipro-cherry-compatible- ... 13964.html
Sorry, this is the only advisement I'll make.
-
aaron
- Location: Germany (Karlsruhe)
- Main keyboard: Noppoo Choc Mini
- Main mouse: Roccat Kova[+], CST
- Favorite switch: MX-Brown mit O-Rings
- DT Pro Member: -
- Contact:
Sorry for the long silence.
We are currently working on the firmware part and a "agent", which will run on the hostsystem.
As soon as this two parts are ready, I post some instructions here to order a PCB, how to solder the parts, how to flash the firmware, how to test the whole thing etc. So stay tuned
We are currently working on the firmware part and a "agent", which will run on the hostsystem.
As soon as this two parts are ready, I post some instructions here to order a PCB, how to solder the parts, how to flash the firmware, how to test the whole thing etc. So stay tuned
-
aaron
- Location: Germany (Karlsruhe)
- Main keyboard: Noppoo Choc Mini
- Main mouse: Roccat Kova[+], CST
- Favorite switch: MX-Brown mit O-Rings
- DT Pro Member: -
- Contact:
Sorry, I had no free time to work on this in the last month. If you want to help me out, I can send you the blank PCB.
Firmware:
https://git.okoyono.de/klaute/n3rdpad
Client Agent:
https://git.okoyono.de/aaron/n3rdpad-agent
I have some very busy weeks ahead, so I think I will not have much time to work on this project for the next couple of weeks. But I have not forgotten this hole thing, I will catch up if I get some spare time.
Firmware:
https://git.okoyono.de/klaute/n3rdpad
Client Agent:
https://git.okoyono.de/aaron/n3rdpad-agent
I have some very busy weeks ahead, so I think I will not have much time to work on this project for the next couple of weeks. But I have not forgotten this hole thing, I will catch up if I get some spare time.