Round 5 and Round 6 kits for sale!
- nnc-tlb
- Location: 04435 Schkeuditz, Germany
- Main keyboard: Perixx PX-5200 BR
- Main mouse: CST2545W-RC
- Favorite switch: Matias Quiet Click
- DT Pro Member: -
I'm lurking for a while. I recently got an Ergodox Infinity with Cherry MX Browns.
I never bought a keycap set.
I want to compile a keycap set from R5/R6 leftovers.
While browsing the leftover pages I got a few questions.
R5
What is the difference between ?
G/BLANK/R3U100C/GREY (blank center-nub key | $1)
BLANK/R3U100C/GREY (blank key cnub (grey) | $2)
and what between ?
HONEY/NUMROW/GREY (Numrow 0-9 grey kit | $19)
HONEY/NUMROW/GREY/E (Numrow 0-9 grey kit | $15)
G/MODSYM150/KIT4/GREY (ModSym 150 (row 3) | $1)
But Picture states 'row 2', wrong picture linked ? what is correct ?
G/MODSYM150/KIT11/GREY (row 2, from regular order | $6)
Missing Picture, what is included ?
what means "from regular order" ? from a pre R5 GB ?
"center nub" or "cnub" means tactile bump ?
Command HONEYB to combine R5 and R6 shipment is still valid ?
R6
The R6 leftovers pages says "in production".
Currently shipping of R6 is underway as I read here, so leftovers should be in stock by now ?
Or some colors are and some are not ?
I never bought a keycap set.
I want to compile a keycap set from R5/R6 leftovers.
While browsing the leftover pages I got a few questions.
R5
What is the difference between ?
G/BLANK/R3U100C/GREY (blank center-nub key | $1)
BLANK/R3U100C/GREY (blank key cnub (grey) | $2)
and what between ?
HONEY/NUMROW/GREY (Numrow 0-9 grey kit | $19)
HONEY/NUMROW/GREY/E (Numrow 0-9 grey kit | $15)
G/MODSYM150/KIT4/GREY (ModSym 150 (row 3) | $1)
But Picture states 'row 2', wrong picture linked ? what is correct ?
G/MODSYM150/KIT11/GREY (row 2, from regular order | $6)
Missing Picture, what is included ?
what means "from regular order" ? from a pre R5 GB ?
"center nub" or "cnub" means tactile bump ?
Command HONEYB to combine R5 and R6 shipment is still valid ?
R6
The R6 leftovers pages says "in production".
Currently shipping of R6 is underway as I read here, so leftovers should be in stock by now ?
Or some colors are and some are not ?
Last edited by nnc-tlb on 22 Dec 2016, 12:09, edited 1 time in total.
- caligo
- Location: Stockholm, Sweden
- Main keyboard: Whitefox
- Main mouse: Ducky Secret Mouse MX
- Favorite switch: Blue
- DT Pro Member: -
Phase 1 is shipping, i.e. cream, purple, blue, and SPH grey. White, black, and grey (and red, I think?) are in Phase 2, and are yet to be produced. So any Phase 1 leftovers should be available now.
- 7bit
- Location: Berlin, DE
- Main keyboard: Tipro / IBM 3270 emulator
- Main mouse: Logitech granite for SGI
- Favorite switch: MX Lock
- DT Pro Member: 0001
I've updated the list and added a new kit:
This is the ideal kit for people who order the
HONEYB/ALPHA/CADET/S
(with |\ key)
and
HONEYB/ALPHA/CADET/T
(without |\ key)
kits which come with the too small legends!
If you need cursor keys, these are still available:
HONEYB/CURSORS/BLUE
HONEYB/CURSOR/R34/VIOLETT
HONEYB/CURSOR/R24/CADET
HONEYB/CURSOR/R43/BLUE
HONEYB/CURSOREXTRA/VIOLETT
HONEYB/CURSYM/BLUE
HONEYB/CURSYM/VIOLETT
HONEYB/CURSYM24/VIOLETT
HONEYB/CURSYM/CADET
This is the ideal kit for people who order the
HONEYB/ALPHA/CADET/S
(with |\ key)
and
HONEYB/ALPHA/CADET/T
(without |\ key)
kits which come with the too small legends!
If you need cursor keys, these are still available:
HONEYB/CURSORS/BLUE
HONEYB/CURSOR/R34/VIOLETT
HONEYB/CURSOR/R24/CADET
HONEYB/CURSOR/R43/BLUE
HONEYB/CURSOREXTRA/VIOLETT
HONEYB/CURSYM/BLUE
HONEYB/CURSYM/VIOLETT
HONEYB/CURSYM24/VIOLETT
HONEYB/CURSYM/CADET
- vinnycordeiro
- DT Pro Member: -
I wish 7bit updates the orders soon, I've added a black numpad almost 2 weeks ago and no payment invoice was sent yet.
- Wodan
- ISO Advocate
- Location: ISO-DE
- Main keyboard: Intense Rotation!!!
- Main mouse: Logitech G903
- Favorite switch: ALL OF THEM
- DT Pro Member: -
I just got an updated invoice ...vinnycordeiro wrote: ↑I wish 7bit updates the orders soon, I've added a black numpad almost 2 weeks ago and no payment invoice was sent yet.
- vinnycordeiro
- DT Pro Member: -
- Wodan
- ISO Advocate
- Location: ISO-DE
- Main keyboard: Intense Rotation!!!
- Main mouse: Logitech G903
- Favorite switch: ALL OF THEM
- DT Pro Member: -
Did you recently send a WASSUP message to 7bot?
Did you send to 7BOT and not 7BIT?
Sometimes i send offensive messages to 7bit that were meant to be for 7bot...
Did you send to 7BOT and not 7BIT?
Sometimes i send offensive messages to 7bit that were meant to be for 7bot...
- vinnycordeiro
- DT Pro Member: -
It was to 7bot, no mistake. I just received an updated invoice to pay for other keycaps, but no numpad.Wodan wrote: ↑Did you recently send a WASSUP message to 7bot?
Did you send to 7BOT and not 7BIT?
Sometimes i send offensive messages to 7bit that were meant to be for 7bot...
- vinnycordeiro
- DT Pro Member: -
HONEYB/NUMPAD/BLACK
It isn't available anymore now, problem is that I ordered that by December 11. :S
It isn't available anymore now, problem is that I ordered that by December 11. :S
- 7bit
- Location: Berlin, DE
- Main keyboard: Tipro / IBM 3270 emulator
- Main mouse: Logitech granite for SGI
- Favorite switch: MX Lock
- DT Pro Member: 0001
It was sold out already when you orderd it.vinnycordeiro wrote: ↑HONEYB/NUMPAD/BLACK
It isn't available anymore now, problem is that I ordered that by December 11. :S
- 7bit
- Location: Berlin, DE
- Main keyboard: Tipro / IBM 3270 emulator
- Main mouse: Logitech granite for SGI
- Favorite switch: MX Lock
- DT Pro Member: 0001
GriffDeLaGriff wrote: ↑So what happened to the caps with too small legends, were they sent back or could we purchase them? I kinda need a full keyboard asap but need norde.
These are still available:
HONEYB/ALPHA/CADET/S
Price: $49
HONEYB/ALPHA/CADET/T
Price: $39 (with |\ missing)
Short question: when are the round 6 leftovers ready for shippment? Are these keys the unsold stuff of the SP shippment which is currently shipping by 7bit (so will they ship when all the old orders are shipped sometime in Januar?) or will this leftovers ship in far future because they are still in the usa or not even produced yet?
- vinnycordeiro
- DT Pro Member: -
- 7bit
- Location: Berlin, DE
- Main keyboard: Tipro / IBM 3270 emulator
- Main mouse: Logitech granite for SGI
- Favorite switch: MX Lock
- DT Pro Member: 0001
SPH, BLUE, VIOLETT, CREAM, CADET, HYPER7: these are all here and ship right now.hansichen wrote: ↑Short question: when are the round 6 leftovers ready for shippment? Are these keys the unsold stuff of the SP shippment which is currently shipping by 7bit (so will they ship when all the old orders are shipped sometime in Januar?) or will this leftovers ship in far future because they are still in the usa or not even produced yet?
WHITE, GREY, RED, BLACK: will be produced really soon!
- Menuhin
- Location: Germany
- Main keyboard: HHKB PD-KB400BN lubed, has Hasu Bt Controller
- Main mouse: How to make scroll ring of Expert Mouse smoother?
- Favorite switch: Gateron ink lubed
- DT Pro Member: -
Although I'm only selecting from the leftovers right now, my invoice already has 2 entries for shipping fee:7bit wrote: ↑SPH, BLUE, VIOLETT, CREAM, CADET, HYPER7: these are all here and ship right now.hansichen wrote: ↑Short question: when are the round 6 leftovers ready for shippment? Are these keys the unsold stuff of the SP shippment which is currently shipping by 7bit (so will they ship when all the old orders are shipped sometime in Januar?) or will this leftovers ship in far future because they are still in the usa or not even produced yet?
WHITE, GREY, RED, BLACK: will be produced really soon!
|Shipping costs | | | | 7.00
|Shipping costs R6 | | | | 7.00
And if I order from R7, I bet there will be a third entry for Shipping costs R7, i.e. another 7€.
Is there any secret to reduce / combine shipment?
- nnc-tlb
- Location: 04435 Schkeuditz, Germany
- Main keyboard: Perixx PX-5200 BR
- Main mouse: CST2545W-RC
- Favorite switch: Matias Quiet Click
- DT Pro Member: -
I'm a newbie but from wikipage:Menuhin wrote: ↑Is there any secret to reduce / combine shipment?
It's a little bit confusing.If you want combined shipping with Round 5 leftovers, just order the HONEYB kit, be sending a pm to [7bot]:
HONEYB
Just HONEYB as a single command to the bot ?
Or choose the equivalent HONEYB-Kit not the HONEY-kit ?
Is R5 aka HONEY renamed to HONEYG ?
- Menuhin
- Location: Germany
- Main keyboard: HHKB PD-KB400BN lubed, has Hasu Bt Controller
- Main mouse: How to make scroll ring of Expert Mouse smoother?
- Favorite switch: Gateron ink lubed
- DT Pro Member: -
HONEYB is the prefix to the set in Round 6 leftover, there is also HONEY and HONEYG in Round 5 leftover
So a set from HONEYB can be HONEYG/SIXTYBASE/BLUE, you just send a message to 7bot with whatever title and put "HONEYG/SIXTYBASE/BLUE 1" in the message body to order 1 of the HONEYG/SIXTYBASE/BLUE kit.
What puzzled me is that combining the orders of Round 5 leftover (HONEY/ or HONEYG/) and Round 6 (HONEYB/) leftover apparently has doubled the shipment for me from 7€ to 14€.
And what confuses more is that at the end of the invoice e-mails sent to me has a long list of "Preorders for Round 7 (ALGOL)" and "Preorders for Round 6 (HoneyB)" and I believe some of those in "Preorders for Round 6 (HoneyB)" have been produced and are readily available to ship out, aren't they? So it should have said "Orders for Round 6 (HoneyB)" instead of "Preorders". Or that they aren't so there has to be an extra cost of 7€ shipment for them to be shipped later with the 2nd phase of Round 6?
I am fine with that as long as Round 7 shipping cost (when I order later) will be combined to that additional 7€ shipping, so I don't pay any shipping for Round 7 when I add some of them to the list. But I want to know if that is the arrangement.
So a set from HONEYB can be HONEYG/SIXTYBASE/BLUE, you just send a message to 7bot with whatever title and put "HONEYG/SIXTYBASE/BLUE 1" in the message body to order 1 of the HONEYG/SIXTYBASE/BLUE kit.
What puzzled me is that combining the orders of Round 5 leftover (HONEY/ or HONEYG/) and Round 6 (HONEYB/) leftover apparently has doubled the shipment for me from 7€ to 14€.
And what confuses more is that at the end of the invoice e-mails sent to me has a long list of "Preorders for Round 7 (ALGOL)" and "Preorders for Round 6 (HoneyB)" and I believe some of those in "Preorders for Round 6 (HoneyB)" have been produced and are readily available to ship out, aren't they? So it should have said "Orders for Round 6 (HoneyB)" instead of "Preorders". Or that they aren't so there has to be an extra cost of 7€ shipment for them to be shipped later with the 2nd phase of Round 6?
I am fine with that as long as Round 7 shipping cost (when I order later) will be combined to that additional 7€ shipping, so I don't pay any shipping for Round 7 when I add some of them to the list. But I want to know if that is the arrangement.
Last edited by Menuhin on 22 Dec 2016, 21:03, edited 1 time in total.
-
- Location: US
- Main keyboard: Leopold FC660C
- Main mouse: Logitech
- Favorite switch: Topre
- DT Pro Member: -
what invoice number is shipping? At some point incompetence becomes criminal fraud, and a year after taking my money and delivering no product, you guys are getting pretty close to that point.
- justcallmecrash
- Location: Greensboro, NC, USA
- Main keyboard: ErgoDox 80g Blacks (home); Ergodox Browns (work)
- Main mouse: Logitech M570/Slimblade
- Favorite switch: Cherry MX 80g Black (NovelKeys pale blues, too)
- DT Pro Member: -
HahahahahahahaWilliamG wrote: ↑what invoice number is shipping? At some point incompetence becomes criminal fraud, and a year after taking my money and delivering no product, you guys are getting pretty close to that point.
First GB? 7Bit takes forever, but he's legit - I'm typing on me R5s right now. Try to remember this is one guy doing everything, not a company. Remember that this is not his full-time gig - it's a labor of love for the community.
- eddible
- Location: United Kingdom
- Main keyboard: Sprit 60% board w/ 62g Zealios and ISO Pulse
- Main mouse: Apple Magic Mouse
- Favorite switch: 62g Zealios
- DT Pro Member: -
What did you order?WilliamG wrote:what invoice number is shipping? At some point incompetence becomes criminal fraud, and a year after taking my money and delivering no product, you guys are getting pretty close to that point.
-
- Location: US
- Main keyboard: Leopold FC660C
- Main mouse: Logitech
- Favorite switch: Topre
- DT Pro Member: -
HONEYB/TKL |TKL grey/white kit |129.00| 1| 86| 129.00
HONEYB/CURSOR/R34/BLACK |Cursor kit (row 3/UP:4) | 6.00| 1| 4| 6.00
HONEYB/BACKSPACE200/BLACK|BACK SPACE (row 1, 2u) | 6.00| 1| 1| 6.00
HONEYB/CONTROL175/GREY |CONTROL (r 3, 1.75 u) | 12.00| 1| 2| 12.00
HONEYB/RETURN225/RED |RETURN (row 3, 2.25u) | 6.00| 1| 1| 6.00
HONEYB/R3U125/GREY |blank key (grey) | 3.00| 1| 1| 3.00
HONEYB/R1U100/RED |blank key (red) | 1.00| 1| 1| 1.00
HONEYB/CURSOR/R34/BLACK |Cursor kit (row 3/UP:4) | 6.00| 1| 4| 6.00
HONEYB/BACKSPACE200/BLACK|BACK SPACE (row 1, 2u) | 6.00| 1| 1| 6.00
HONEYB/CONTROL175/GREY |CONTROL (r 3, 1.75 u) | 12.00| 1| 2| 12.00
HONEYB/RETURN225/RED |RETURN (row 3, 2.25u) | 6.00| 1| 1| 6.00
HONEYB/R3U125/GREY |blank key (grey) | 3.00| 1| 1| 3.00
HONEYB/R1U100/RED |blank key (red) | 1.00| 1| 1| 1.00
- eddible
- Location: United Kingdom
- Main keyboard: Sprit 60% board w/ 62g Zealios and ISO Pulse
- Main mouse: Apple Magic Mouse
- Favorite switch: 62g Zealios
- DT Pro Member: -
Your keys are phase 2, they're still to be produced. 7bit said a couple posts back that they'd be produced "soon".WilliamG wrote:HONEYB/TKL |TKL grey/white kit |129.00| 1| 86| 129.00
HONEYB/CURSOR/R34/BLACK |Cursor kit (row 3/UP:4) | 6.00| 1| 4| 6.00
HONEYB/BACKSPACE200/BLACK|BACK SPACE (row 1, 2u) | 6.00| 1| 1| 6.00
HONEYB/CONTROL175/GREY |CONTROL (r 3, 1.75 u) | 12.00| 1| 2| 12.00
HONEYB/RETURN225/RED |RETURN (row 3, 2.25u) | 6.00| 1| 1| 6.00
HONEYB/R3U125/GREY |blank key (grey) | 3.00| 1| 1| 3.00
HONEYB/R1U100/RED |blank key (red) | 1.00| 1| 1| 1.00
- Menuhin
- Location: Germany
- Main keyboard: HHKB PD-KB400BN lubed, has Hasu Bt Controller
- Main mouse: How to make scroll ring of Expert Mouse smoother?
- Favorite switch: Gateron ink lubed
- DT Pro Member: -
!!!
I am further confused (or actually enlightened?)
That means if I order anything from the Round 5 leftover and Round 6 leftover list, even when a kit is listed as "leftover" but if that belongs to any of the "WHITE, GREY, RED, BLACK" categories, then it is actually not yet produced.
e.g. anything "HONEY/.../GREY" or "HONEYB/.../GREY" or "HONEY/.../BLACK" etc on the R5 leftover and R6 leftover.
Will be shipped only some time in the future when it is finally produced.
And that is the reason I have 2 separate shipping fees because something I'm ordering from the "leftover" list is actually in the not-yet-existing pre-orders.
Is that correct / probably?