Round 5 and Round 6 kits for sale!
- 7bit
- Location: Berlin, DE
- Main keyboard: Tipro / IBM 3270 emulator
- Main mouse: Logitech granite for SGI
- Favorite switch: MX Lock
- DT Pro Member: 0001
When the key caps have been produced and shipped, and no HONEYB/NUMPAD/BLACK kits are lost, I will have at least 3 kits from the reserve!
Nobody paid yesterday, but at least keys for $288 had been ordered!
About $2200 are unpaid (mostly Round 6 orders). Since i've cleared orders hat had been unpaid for more than 10 days, there are good chances that these orders will be paid.
Also: I got the OK that Round 6 phase 2 will be scheduled at the end of 2017, but we really have to pay for production as soon as possible!
The future of Round 7 is still unsure. I've asked under which circumstances another round would be possible, like higher MOQ, less fragmented order list (each key a different amount to be produced) etc.
One thing is certain, Round 7 will not be produced before mid-2018. This should have been clear from the beginning, that Round 7 isn't a quick thing. You can always get something else or get your money back, starting from March, once we have paid for phase 2 production.
Nobody paid yesterday, but at least keys for $288 had been ordered!
About $2200 are unpaid (mostly Round 6 orders). Since i've cleared orders hat had been unpaid for more than 10 days, there are good chances that these orders will be paid.
Also: I got the OK that Round 6 phase 2 will be scheduled at the end of 2017, but we really have to pay for production as soon as possible!
The future of Round 7 is still unsure. I've asked under which circumstances another round would be possible, like higher MOQ, less fragmented order list (each key a different amount to be produced) etc.
One thing is certain, Round 7 will not be produced before mid-2018. This should have been clear from the beginning, that Round 7 isn't a quick thing. You can always get something else or get your money back, starting from March, once we have paid for phase 2 production.
- IronSunsetscales
- Location: Denderleeuw, Belgium
- Main keyboard: Keychron Q1/Tecsee Sapphire/SA Calm Depths
- Main mouse: Trust 23507
- DT Pro Member: -
7bit wrote: ↑When the key caps have been produced and shipped, and no HONEYB/NUMPAD/BLACK kits are lost, I will have at least 3 kits from the reserve!
Nobody paid yesterday, but at least keys for $288 had been ordered!
About $2200 are unpaid (mostly Round 6 orders). Since i've cleared orders hat had been unpaid for more than 10 days, there are good chances that these orders will be paid.
Also: I got the OK that Round 6 pahse 2 will be scheduled at the end of 2017, but we really have to pay for production as soon as possible!
The future of Round 7 is still unsure. I've asked under which circumstances another round would be possible, like higher MOQ, less fragmented order list (each key a different amount to be produced) etc.
One thing is certain, Round 7 will not be produced before mid-2018. This should have been clear from the beginning, that Round 7 isn't a quick thing. You can always get something else or get your money back, starting from March, once we have paid for phase 2 production.
I'll take a black numpad set when there is one left over!
- zslane
- Location: Los Angeles, California, USA
- Main keyboard: RealForce RGB
- Main mouse: Basic Microsoft USB mouse
- Favorite switch: Topre
- DT Pro Member: -
If we have to collect $200-300 every day for a month to reach our funding goal, then I think it's going to take a lot longer than the month of February.
-
- Location: Vietnam
- DT Pro Member: -
Someone please sell me CREAM alphas kit (HONEYB/ALPHAINT/CREAM) or any kit/bundle which contains those alphas, at a reasonable margin.
I will donate an amount equals 20% of what I paid for to support the completion of Phase 2.
I will donate an amount equals 20% of what I paid for to support the completion of Phase 2.
- gnarlsagan
- Main keyboard: Leopold FC660M
- Favorite switch: Cherry MX Brown
- DT Pro Member: -
Super late to be asking this, but how are you guys covering your 1800 boards? Shouldn't there be an R1 PAGE DOWN and END, or do people just use R2 for those keys? I see R1 DELETE is covered in the cursorextra kits.
- 7bit
- Location: Berlin, DE
- Main keyboard: Tipro / IBM 3270 emulator
- Main mouse: Logitech granite for SGI
- Favorite switch: MX Lock
- DT Pro Member: 0001
It is not like all 3 of you have to collect that amount, just all combined.zslane wrote: ↑If we have to collect $200-300 every day for a month to reach our funding goal, then I think it's going to take a lot longer than the month of February.
However, a larger speed would be appreciated.
Apropos: as of today, only $5019.47 are missing.
- 7bit
- Location: Berlin, DE
- Main keyboard: Tipro / IBM 3270 emulator
- Main mouse: Logitech granite for SGI
- Favorite switch: MX Lock
- DT Pro Member: 0001
Here it is maked as shipped.krutmob wrote: ↑Still waiting on #1070; it's been marked as packed for about a week now.
These shipped yesterday:
0814
0727
0642
1127
1124
1122
1089
1070
0833
0379
- Ail
- Location: United States
- Main keyboard: TADA68
- Main mouse: Zowie FK2
- Favorite switch: Gateron Blue
- DT Pro Member: -
Paid my order yesterday, too! I wish I could afford to order more. 7bit have you cleared any Webwit caps? I don't know how I didn't get any ducks in my original order, but I need some ducks!7bit wrote: ↑It is not like all 3 of you have to collect that amount, just all combined.zslane wrote: ↑If we have to collect $200-300 every day for a month to reach our funding goal, then I think it's going to take a lot longer than the month of February.
However, a larger speed would be appreciated.
Apropos: as of today, only $5019.47 are missing.
- zslane
- Location: Los Angeles, California, USA
- Main keyboard: RealForce RGB
- Main mouse: Basic Microsoft USB mouse
- Favorite switch: Topre
- DT Pro Member: -
Hmm. My HONEYB/FUNCTION3/BLUE kit doesn't appear to be on that list. I added SHIPNOW and everything...
- 7bit
- Location: Berlin, DE
- Main keyboard: Tipro / IBM 3270 emulator
- Main mouse: Logitech granite for SGI
- Favorite switch: MX Lock
- DT Pro Member: 0001
I think I still have some, just have to take a look tomorrow.Ail wrote: ↑Paid my order yesterday, too! I wish I could afford to order more. 7bit have you cleared any Webwit caps? I don't know how I didn't get any ducks in my original order, but I need some ducks!
- LeandreN
- Location: ISO Nordic
- Main keyboard: Skidata 60%
- Main mouse: MX Master
- Favorite switch: i like tactile, and linear, and clicky
- DT Pro Member: -
-
- DT Pro Member: -
I will be using HONEYB/SYMBOLS/R1/WHITE for the top row, which is Home/End/PgUp/PgDn.gnarlsagan wrote: ↑Super late to be asking this, but how are you guys covering your 1800 boards? Shouldn't there be an R1 PAGE DOWN and END, or do people just use R2 for those keys? I see R1 DELETE is covered in the cursorextra kits.
- phinix
- Location: Scotland - Glasgow
- Main keyboard: CM QuickFire Rapid MX Blacks -- Realforce R1 55g
- Main mouse: Logitech Pro Superlight
- Favorite switch: Topre, MX Blacks
- DT Pro Member: -
- Ail
- Location: United States
- Main keyboard: TADA68
- Main mouse: Zowie FK2
- Favorite switch: Gateron Blue
- DT Pro Member: -
Sent a PM.zslane wrote: ↑PM me your address.
7-bit, if you have any 1u ducks (not sure if they were made in 1u) I'd still buy one or two more. Either way you can just ship my pending order as is currently. My body is ready for round5/6 caps.