Price Check: How much is my _____ worth?

[Honthro]

Have these gone up in value for a BNIB one to be worth anything?
link: http://imgur.com/a/vISMz

[fohat]

Have these gone up in value for a BNIB one to be worth anything?

If those are the dye-sub PBT caps they are very desirable.

That keyboard is a magnificent candidate for a "top end" switch mod.

[Honthro]

Have these gone up in value for a BNIB one to be worth anything?

If those are the dye-sub PBT caps they are very desirable.

That keyboard is a magnificent candidate for a "top end" switch mod.

Pretty sure it's your run of the mill ABS. I have another Dell AT101W and it's the same type of thin keycaps

[dede4metal]

This guy has no idea what these two apple keyboard are worth. Me neither, could you help? http://www.subito.it/hobby-collezionism ... 272107.htm

[fohat]

I have another Dell AT101W and it's the same type of thin keycaps

"W" always has lasered ABS that aren't very good.

If that serial number says 28K it may well be early enough to have the good ones.

[alh84001]

This guy has no idea what these two apple keyboard are worth. Me neither, could you help? http://www.subito.it/hobby-collezionism ... 272107.htm

Barely anything keyboard-wise. First one is the Apple IIc computer, but the A2S4000 model which comes with apple hairpin switches which are (supposedly) horrible. Second one is wiki/Apple_Keyboard_II (it doesn't have alps switches)

[Honthro]

I have another Dell AT101W and it's the same type of thin keycaps

"W" always has lasered ABS that aren't very good.

If that serial number says 28K it may well be early enough to have the good ones.

Actually I think you might be right. I compared the W to this BNIB one and the keys sound distinctly different. The BNIB one is much lower pitch and thockier sound. What would this go for on ebay or deskthority?

[dede4metal]

I bought a 1391472 Model M SSK quite clean, that needs bolt modding for 180 GBP, did I do well?

[taylorswiftttttt]

removed

[need]

I bought a 1391472 Model M SSK quite clean, that needs bolt modding for 180 GBP, did I do well?

That's from a UK vendor, right?
That has been sitting there for a very long time now...

[dede4metal]

I have seen that one but mine was from a guy on gumtree

[dede4metal]

Ciao again can you see anything interesting in this selection? To me is all crap http://www.subito.it/informatica/tastie ... 976935.htm

[Nuum]

The IBM board is a Model M2, but the rest are rubberdomes.

[bell peppers]

how much for a blue badge SSK in ANSI with recently replaced springs in the UK?

[taylorswiftttttt]

removed

[emdude]

SSK prices have been in a downward trend; I'd expect $175-200 for one.

[bell peppers]

what about UK prices? USD doesnt mean much to me

[dede4metal]

what about UK prices? USD doesnt mean much to me

It should be in the region of 140-180 GBP depending on how much it rattles. I personally not buy a blue label one, the older ones are muuuuuch better (IMHO)

[Redmaus]

How much is a Filco Zero worth with in perfect condition beside some shine on the keys?

[seebart]

SSK prices have been in a downward trend; I'd expect $175-200 for one.

Not over here.

[dede4metal]

Not over here.

Where is over here?

[seebart]

Not over here.

Where is over here?

Over here:

Unbenannt.PNG (19.53 KiB) Viewed 5486 times

[Wingklip]

How much is an IBM 6580 in Australian dollarydoos?

[alh84001]

Anywhere in AUD$200-400 range.

[Wingklip]

Would that include shipping or nah

[alh84001]

that's without the shipping

[seebart]

This is my Beamspring me and Wingklip were talking about, I would suggest you have more patience Wingklip since shipping is steep from Germany to Australia and the Beam is heavy although your latest offer is tempting.

IMG_20160616_200118.jpg (890.4 KiB) Viewed 5342 times

IMG_20160616_200127.jpg (904.85 KiB) Viewed 5342 times

[lot_lizard]

This is my Beamspring
...

Always loved the caps themselves on this one. Something sexy about that Eszett

[Khers]

Just out of interest, how much would shipping the great white from Europe to Australia be?

[Half-Saint]

I've got a NIB (box has been opened for photos) Lexmark branded SSK, french layout. How much would that go for nowadays?