Post your desktop.

stratokaster · 16 Nov 2018, 23:59

Oh yeah, everybody's favourite JCUKENG layout...

lucar · 17 Nov 2018, 10:32

tron wrote: My setup for 2018. I'm currently using the dual Cyrillic/English 3278 I restored earlier this year.

Restoration link- https://imgur.com/a/D1XHKll

Extra shots- https://imgur.com/a/8Hewqjj

Absolutely gorgeous!! Congrats!

Luca

paddle0 · 23 Nov 2018, 14:47

My Christmas-time work setup: a white Leopold FC900R keyboard with black Cherry MX switches and mixed-and-matched white, red & green Tai-Hao ABS keycap sets. Custom-made pine display stand.

Happy Holidays!

DJSwayde · 23 Nov 2018, 15:48

tron wrote: My setup for 2018. I'm currently using the dual Cyrillic/English 3278 I restored earlier this year.

Restoration link- https://imgur.com/a/D1XHKll

Extra shots- https://imgur.com/a/8Hewqjj

Holy mother of god.

ThePillenwerfer · 23 Nov 2018, 17:30

Seeing as you asked. Upstairs:—

: STA50003.JPG (473.81 KiB) Viewed 9903 times

Downstairs:—

: STA50004.JPG (475.12 KiB) Viewed 9903 times

green-squid · 23 Nov 2018, 17:33

Windows XP

God bless

depletedvespene · 23 Nov 2018, 17:44

The rubber domes disturb me more, I must say.

stratokaster · 23 Nov 2018, 18:31

That IBM-branded Chicony is rather good for a rubber dome. Better than e.g. Cherry MX Black

ThePillenwerfer · 23 Nov 2018, 18:49

Actually, I didn't realise it was rubber-dome until I took it to bits to clean.

: IBM.JPG (178.51 KiB) Viewed 9734 times

: IBM Label.JPG (186.4 KiB) Viewed 9734 times

The black eMachines one is about what you'd expect, and the soldering-iron hole shows why I wouldn't want anything very good there. I used an Amstrad PC for twenty years so my idea of what constitutes good is pretty low.

ZedTheMan · 23 Nov 2018, 22:07

Here's the Zed desk.

It's just as disorganized as me behind those monitors.

To the right is my "main" pile of keyboards. The ones I actually pull out and use from time to time.
Shamefully, I am not good at taking a picture of the whole setup.

A lot of this stuff was gotten from public surplus auctions. A good source of monitors, wrist rests, file storage shelves, and the occasional keyboard, from my experience.

(edit: Picture seems upside down. I need to fix that)
(edit2: Picture fixed, rehosted)

Dingster · 23 Nov 2018, 22:49

stratokaster wrote: That IBM-branded Chicony is rather good for a rubber dome. Better than e.g. Cherry MX Black

Dont bully MX black

stratokaster · 23 Nov 2018, 23:06

Dingster wrote:
stratokaster wrote: That IBM-branded Chicony is rather good for a rubber dome. Better than e.g. Cherry MX Black
Dont bully MX black

I don't really hate MX Black, however I have a Cherry G80-3000LPMEU which I sort of wanted to use for my retro gaming setup, but it's so meh that I vastly prefer my NMB-made Dell QuietKey.

green-squid · 24 Nov 2018, 14:32

Decided to try a different kind of setup today.

Laser · 24 Nov 2018, 14:53

Make sure to crank up the brightness and contrast to 100% - no point in having a CRT monitor without enjoying the full blaze of light coming to you from the cathodic tube during winter season

green-squid · 24 Nov 2018, 15:12

Laser wrote: Make sure to crank up the brightness and contrast to 100% - no point in having a CRT monitor and not enjoy the full blaze of light coming to you from the cathodic tube during winter season

I want to use this CRT for as long as possible so I must keep the brightness low.

stratokaster · 24 Nov 2018, 15:30

I want to get a CRT, but I can't find one locally

Laser · 24 Nov 2018, 19:02

green-squid wrote:
Laser wrote: Make sure to crank up the brightness and contrast to 100% - no point in having a CRT monitor and not enjoy the full blaze of light coming to you from the cathodic tube during winter season
I want to use this CRT for as long as possible so I must keep the brightness low.

Of course. I was trying a joke-combined-with-a-warning - much as I like CRTs for their coolness factor, I wouldn't use one for daily work - it's way worse on the eyes than a LCD.

Dingster · 24 Nov 2018, 21:29

green-squid wrote: Decided to try a different kind of setup today.

Comfy. Why not get a high end CRT? Syncmasters (personally recommend a 959nf) are prety easy to find, make sure horizontal refresh is 110kHz and you should be good.
Also keep an eye out on mitsubishi, eizo, trinitrons (kinda overhyped),viewsonic,...etc. since most of them are pretty amazing

green-squid · 25 Nov 2018, 11:26

Well, because they wouldnt fit in my room anymore!

kekstee · 25 Nov 2018, 11:31

I do miss CRTs a bit :(
Wish I could sit down with one just to play Quake or something.

Menuhin · 25 Nov 2018, 13:54

ThePillenwerfer wrote: Actually, I didn't realise it was rubber-dome until I took it to bits to clean.

IBM.JPG
IBM Label.JPG
The black eMachines one is about what you'd expect, and the soldering-iron hole shows why I wouldn't want anything very good there. I used an Amstrad PC for twenty years so my idea of what constitutes good is pretty low.

It is the IBM rubber-dome model that I really like, especially the versions with trackpoint. It's smooth with the right degree of tactility for my style and comfort. I still miss that black IBM trackpoint desktop keyboard till now.

LessthanZero · 26 Nov 2018, 01:17

: 20181125_181119.jpg (4.52 MiB) Viewed 9634 times

My horribly messy project/test bench, space is at a premium at my house. Also I'm horribly unorganized.

Dingster · 28 Nov 2018, 19:20

Nice X220t

Ralph_IT · 05 Dec 2018, 14:11

My desktop:

: desktop.jpg (1.81 MiB) Viewed 9460 times

One of these rare occasions where the desk was not cluttered by a ton of papers, books and other kind of debris..

Linkert · 05 Dec 2018, 21:17

LessthanZero wrote:
20181125_181119.jpg
My horribly messy project/test bench, space is at a premium at my house. Also I'm horribly unorganized.

dwm, nice

madrobby · 11 Dec 2018, 15:57

This changes all the time, but right now I’m enjoying the AEK II

__red__ · 11 Dec 2018, 17:38

madrobby wrote: This changes all the time, but right now I’m enjoying the AEK II

I'd place money that you're ever so slightly OCD.

How do I know? You aligned the curvature of the earth and the laptop precisely

Dingster · 11 Dec 2018, 17:44

__red__ wrote:
madrobby wrote: This changes all the time, but right now I’m enjoying the AEK II
I'd place money that you're ever so slightly OCD.

How do I know? You aligned the curvature of the earth and the laptop precisely

idk, the left corner of the desk says otherwise

(nothing wrong with an organized mess)

andrewjoy · 11 Dec 2018, 18:22

More importantly , why is the Unifi camera pointing directly at the access point ? I know the AC SHD is expensive but its not THAT expensive that it needs its own camera

.

We use loads of unifi stuff, love it!

: unifi2.png (62.23 KiB) Viewed 9244 times

: unifi 1.png (92.67 KiB) Viewed 9244 times

madrobby · 16 Dec 2018, 00:30

Due to a fresh diagnose of carpal tunnel syndrome, I’ve switched to a RollerMouse. The keyboard is a Topre Realforce RGB with SA Honeywell caps (plus a few extras).

: 6EB5D813-11EF-4A1A-B78A-54E428AD0F42.jpeg (3.01 MiB) Viewed 9175 times