IBM stash in Houston
- elecplus
- Location: Kerrville, TX, USA
- DT Pro Member: 0082
- Contact:
https://drive.google.com/open?id=1xwq1J ... TogANG2iye This was sent to me by a fellow member here. We are getting a group together to sort it all out. If you live in Houston, or close by, and want to help, send me a PM!
- TheInverseKey
- Location: Great White North
- Main mouse: M570
- Favorite switch: Hi-Tek 725 Linear
- DT Pro Member: 0216
- Contact:
Model M Spotted!elecplus wrote: ↑11 Jan 2019, 19:30https://drive.google.com/open?id=1xwq1J ... TogANG2iye This was sent to me by a fellow member here. We are getting a group together to sort it all out. If you live in Houston, or close by, and want to help, send me a PM!
- depletedvespene
- Location: Chile
- Main keyboard: IBM Model F122
- Main mouse: Logitech G700s
- Favorite switch: buckling spring
- DT Pro Member: 0224
- Contact:
Good luck! Wish I was there.
- ClicksOnLinks
- Location: San Antonio, Texas
- Main keyboard: IBM Model F107
- Main mouse: Logitech g502
- Favorite switch: BEAMSPRINGSES
- DT Pro Member: -
I'd love to come help, out of town unfortunately
- elecplus
- Location: Kerrville, TX, USA
- DT Pro Member: 0082
- Contact:
Stash will be sorted out early next Saturday morning in Katy, TX. If you are interested in carpooling with Xmit, there might be 1 seat left. Please send him a PM ASAP. If you are out of town and want to come down from the Michigan area, please send a PM to JP!
- JP!
- Location: United States
- Main keyboard: Currently a Model M
- Main mouse: Steel Series Sensei
- Favorite switch: Beam Spring
- DT Pro Member: 0194
- Contact:
Just a quick reminder that round 1 of the Houston haul will take place @ 10-10-30am (all day) on Saturday 1/19! The keyboards most likely will find new homes quickly but there are literally hundreds of towers and monitors and boxes filled with old computer books and manuals pm me for details. No way we can even make a dent in this pile so if you can't make it Saturday I can still put you in touch.
Note: this is the nearly empty unit. The main unit though is 15' x 30' and is filled basically to the ceiling by a master hoarder.
Note: this is the nearly empty unit. The main unit though is 15' x 30' and is filled basically to the ceiling by a master hoarder.
- Muirium
- µ
- Location: Edinburgh, Scotland
- Main keyboard: HHKB Type-S with Bluetooth by Hasu
- Main mouse: Apple Magic Mouse
- Favorite switch: Gotta Try 'Em All
- DT Pro Member: µ
A master hoarder indeed. Those weighty CRTs piled on high, over better things, gives me the heebies. But such is the way of a hoard in the rough.
Best of luck with the harvest!
Best of luck with the harvest!
- mcmaxmcmc
- Location: United States
- Main keyboard: Boring Box
- Main mouse: Endgame Gear XM1
- Favorite switch: Hirose Clears
- DT Pro Member: -
Man, I wish I could've been there! It seems so fun to just dig and loot stuff. Too bad I'm in northern California. Wish the best of luck to everyone who's going! (someone get me a Model M/F if there's one from the pile for shipping price pls)
- matt3o
- -[°_°]-
- Location: Italy
- Main keyboard: WhiteFox
- Main mouse: Anywhere MX
- Favorite switch: Anything, really
- DT Pro Member: 0030
- Contact:
man, I would love one of those old IBM cases... but shipping and import would kill me
- JP!
- Location: United States
- Main keyboard: Currently a Model M
- Main mouse: Steel Series Sensei
- Favorite switch: Beam Spring
- DT Pro Member: 0194
- Contact:
So today Elecplus, Xmit, myself and a few others joined in for an adventure packed day of sifting through massive towers of computers and monitors. Although we did not get through everything, we covered a lot of ground but with better planning I think we definitely could have sorted through the whole stash in about half the time but everything we moved out that did not find a home had to go back.
Some of the keyboards (boxes more and wish I had more pictures) but some of these I either acquired or found interesting enough to take a picture of. There were lots of Model M's around, only a single Model F XT was found, a couple Leading Edge boards with blue Alps, and every variety of Apple keyboard one could imagine were there.
Vintage computer stuff that belongs in a museum:
Some of the keyboards (boxes more and wish I had more pictures) but some of these I either acquired or found interesting enough to take a picture of. There were lots of Model M's around, only a single Model F XT was found, a couple Leading Edge boards with blue Alps, and every variety of Apple keyboard one could imagine were there.
Spoiler:
Spoiler:
This shirt is legit
Sadly the rarest Apple stuff seemed to be at the bottom under several hundred pounds of junk. Today an Apple Lisa was also extricated from this disaster.
Two PDP-11 systems with Kennedy tape drives and Atex terminal hardware were in the large unit with the two other large IBM systems.
PDP-11/34
IBM Series 1 used by Honda Motors
Last edited by JP! on 22 Jan 2019, 05:36, edited 18 times in total.
- depletedvespene
- Location: Chile
- Main keyboard: IBM Model F122
- Main mouse: Logitech G700s
- Favorite switch: buckling spring
- DT Pro Member: 0224
- Contact:
Thanks to all of you for your work.
Quick question: did you rescue out that Apple III in that picture in addition to an Apple Lisa?
Quick question: did you rescue out that Apple III in that picture in addition to an Apple Lisa?
- elecplus
- Location: Kerrville, TX, USA
- DT Pro Member: 0082
- Contact:
The guy kept the Apple IIIs and the Lisa for eBay.depletedvespene wrote: ↑20 Jan 2019, 12:17Thanks to all of you for your work.
Quick question: did you rescue out that Apple III in that picture in addition to an Apple Lisa?
- digital_matthew
- Location: United States
- Main keyboard: Ellipse Model F62
- Main mouse: It's a Secret.
- Favorite switch: Capacative Buckling Spring
- DT Pro Member: -
There's a keyboard that's very similar that Atex Terminal at the recycling center near me, but unfortunately it's in their "props rental" department and not for sale. Wish I could have been there!
- XMIT
- [ XMIT ]
- Location: Austin, TX area
- Main keyboard: XMIT Hall Effect
- Main mouse: CST L-Trac Trackball
- Favorite switch: XMIT 60g Tactile Hall Effect
- DT Pro Member: 0093
What happened to that Atex Terminal? I was thinking of picking it up. Also what happened to that Epson board? What switches did the Epson board have?
I brought home the Micro Switch board (it's really a word processor) and a bunch of Model Ms. Photos if and when the kids give me a break...
I do have some thoughts on how to improve efficiency for next time:
- Get a dumpster. Ideally a few dumpsters: one for e-waste, one for cardboard and paper recycling, and one for trash.
- Get Gaylord boxes on pallets and a pallet jack. Use these for sorting.
- Aim to only move or touch things once. The fact that we pulled everything out, and then put it all back in, was a real productivity killer. Better would have been to move things once into a box, and then move that box with a pallet jack.
- Set up a video camera and have it record the whole time. It will record too much video, but, it's easier than stopping to take lots of photos.
- Everyone should have gloves, a headlamp, and good boots!
I discovered, and made sure to give away, the Model F XT that we found, and the two Apple IIc's with Taxicab yellows. They're, IMO, nicer than Blue Alps.
You find all sorts of things in hunts like this. I personally brought home a bunch of stuff for the kids: old Xbox 360 games, some stuffed animals, a toy robot, some science kits, and a few other knick knacks. I may go back sometime.
Thanks to all who were there yesterday!
I brought home the Micro Switch board (it's really a word processor) and a bunch of Model Ms. Photos if and when the kids give me a break...
I do have some thoughts on how to improve efficiency for next time:
- Get a dumpster. Ideally a few dumpsters: one for e-waste, one for cardboard and paper recycling, and one for trash.
- Get Gaylord boxes on pallets and a pallet jack. Use these for sorting.
- Aim to only move or touch things once. The fact that we pulled everything out, and then put it all back in, was a real productivity killer. Better would have been to move things once into a box, and then move that box with a pallet jack.
- Set up a video camera and have it record the whole time. It will record too much video, but, it's easier than stopping to take lots of photos.
- Everyone should have gloves, a headlamp, and good boots!
I discovered, and made sure to give away, the Model F XT that we found, and the two Apple IIc's with Taxicab yellows. They're, IMO, nicer than Blue Alps.
You find all sorts of things in hunts like this. I personally brought home a bunch of stuff for the kids: old Xbox 360 games, some stuffed animals, a toy robot, some science kits, and a few other knick knacks. I may go back sometime.
Thanks to all who were there yesterday!
- abrahamstechnology
- Location: United States
- Main keyboard: Laser with SMK Cherry mount
- Main mouse: Mitsumi ECM-S3902
- Favorite switch: Alps and Alps clones
- DT Pro Member: 0212
Save some of the old PCs! I know I'm very bogged down in projects and schoolwork but I'd take one!
- JP!
- Location: United States
- Main keyboard: Currently a Model M
- Main mouse: Steel Series Sensei
- Favorite switch: Beam Spring
- DT Pro Member: 0194
- Contact:
Thanks for the pro tips. It's doubtful I will do anything like this in the near future but I've thought the same before and this ended up being a spur of the moment opportunity. If I do come across something to this scale I'll try and do some things a bit differently but maybe cases like these are best suited to the professionals.
The Epson has linear Fujitsu leaf springs and the Atex terminal display and keyboard are still in the unit. Also that other Apple IIc I left behind.
The Epson has linear Fujitsu leaf springs and the Atex terminal display and keyboard are still in the unit. Also that other Apple IIc I left behind.
- abrahamstechnology
- Location: United States
- Main keyboard: Laser with SMK Cherry mount
- Main mouse: Mitsumi ECM-S3902
- Favorite switch: Alps and Alps clones
- DT Pro Member: 0212
- abrahamstechnology
- Location: United States
- Main keyboard: Laser with SMK Cherry mount
- Main mouse: Mitsumi ECM-S3902
- Favorite switch: Alps and Alps clones
- DT Pro Member: 0212
What's that Hewlett Packard near the IBMs?
-
- Main keyboard: M0115 w/ Orange Alps/Corsair K70
- Favorite switch: Orange Alps
- DT Pro Member: -
If anybody is looking to sell anything they got I'd be interested PM me! Good Haul!
- XMIT
- [ XMIT ]
- Location: Austin, TX area
- Main keyboard: XMIT Hall Effect
- Main mouse: CST L-Trac Trackball
- Favorite switch: XMIT 60g Tactile Hall Effect
- DT Pro Member: 0093
JP!, after this, you /are/ one of the professionals.
abrahamstechnology, there were a bunch of PS/1, PC XT, 286 and 386 systems of various generations. I may go back some time soon.
abrahamstechnology, there were a bunch of PS/1, PC XT, 286 and 386 systems of various generations. I may go back some time soon.
- abrahamstechnology
- Location: United States
- Main keyboard: Laser with SMK Cherry mount
- Main mouse: Mitsumi ECM-S3902
- Favorite switch: Alps and Alps clones
- DT Pro Member: 0212
- ZedTheMan
- Location: Central US
- Main keyboard: IModel F77/IBM 3101/Omnikey 102/96Kee
- Main mouse: Logitech G430/Logitech M570/Kensington Expert
- Favorite switch: Beamsprings. Alps SKCM Blue, Capacitive Buckling S
- DT Pro Member: 0219
If someone could please get that Apple IIc board left in the unit I really would like it. We can talk about a price as well as shipping via PM, I'd really like to try Amber Alps.
Edit: assuming it is attached to the original machine and it is in working or repairable condition, I do promise to replace the switches so that the unit is not left unusable, and to restore for personal use or for another collector.
Edit: assuming it is attached to the original machine and it is in working or repairable condition, I do promise to replace the switches so that the unit is not left unusable, and to restore for personal use or for another collector.
Last edited by ZedTheMan on 21 Jan 2019, 05:57, edited 1 time in total.
- mcmaxmcmc
- Location: United States
- Main keyboard: Boring Box
- Main mouse: Endgame Gear XM1
- Favorite switch: Hirose Clears
- DT Pro Member: -
Hey, I'll take 1 of those Ms if you have too much
I'm also interested in 1 of those systems (most notably the XT), but I'll have to take shipping price into account.
Last edited by mcmaxmcmc on 21 Jan 2019, 05:17, edited 1 time in total.
- mcmaxmcmc
- Location: United States
- Main keyboard: Boring Box
- Main mouse: Endgame Gear XM1
- Favorite switch: Hirose Clears
- DT Pro Member: -
Hey, I'll take 1 of those Ms if you have too much
I'm also interested in 1 of those systems (most notably the XT), but I'll have to take shipping price into account.