IDENTIFY THE KEYBOARD thread

[Findecanor]

Is this a BTC keyboard? Does escape as the only extra-wide key on the board pretty much *always* signify BTC? Thanks.

BTC is the only manufacturer that I know of that did that. If ESC is 1.25, the slight S-curve of the case profile also increases the likelihood that a keyboard is BTC.

[Polecat]

BTC is the only manufacturer that I know of that did that. If ESC is 1.25, the slight S-curve of the case profile also increases the likelihood that a keyboard is BTC.

Focus also had the wide escape key on some models <FK-6000=attached> but I don't think this one is a Focus.

Focus FK-6000 (ebay image)

fk-6000.jpg (92.72 KiB) Viewed 7123 times

[Keybug]

I guess the exaggerated reverse slope of the bottom row keycaps is also a telltale sign for BTC?

[mcmaxmcmc]

my Monterey dome with slider board also came with a 1.25u Esc key... what a weird board

[Tigris Calvariam]

Hi, I'll try to keep this as short as possible.

I bought this keyboard off of Ebay, however the seller didn't have much info on it. There's no sticker on the back, and I haven't been inside it yet (if that even matters). Here's what I know so far...

1. White Alps SKCM ("pine" I think)
2. The connector cable is tiny (as seen in photo) making me think it's from a portable system.
3. AT/XT switch on the back.
4. The flip out feet have "I-80" molded on the underside.
5. The keycaps are doubleshots, but I don't know the type of plastic and there's no yellowing that I can see.
6. On the sides it has latches very similar to the Compaq Portable 1's keyboard.

Any information would be appreciated, thank you.

0.jpg (122.99 KiB) Viewed 7047 times

20190120_133059.jpg (2.3 MiB) Viewed 7047 times

20190120_133137.jpg (2.25 MiB) Viewed 7047 times

20190120_133249.jpg (2.18 MiB) Viewed 7047 times

[Muirium]

Quite likely a luggable portable PC’s keyboard. The macro key is quite interesting: it was programmable.

The caps are definitely ABS. Doubleshots always are. It’s still a good colour because it’s been kept in a box all these years, most likely.

[Polecat]

Hi, I'll try to keep this as short as possible.

I bought this keyboard off of Ebay, however the seller didn't have much info on it. There's no sticker on the back, and I haven't been inside it yet (if that even matters). Here's what I know so far...

1. White Alps SKCM ("pine" I think)
2. The connector cable is tiny (as seen in photo) making me think it's from a portable system.
3. AT/XT switch on the back.
4. The flip out feet have "I-80" molded on the underside.
5. The keycaps are doubleshots, but I don't know the type of plastic and there's no yellowing that I can see.
6. On the sides it has latches very similar to the Compaq Portable 1's keyboard.

Any information would be appreciated, thank you.

Neat, I haven't seen that version before. I have a similar keyboard with a different layout. <attached> Mine came with a generic luggable case (which I also have) that was sold with no motherboard. It wasn't part of a name-brand system.

DSCN0328.JPG (815.49 KiB) Viewed 7021 times

The only ID on mine is "IMP" followed by a serial number on a small paper label. Mine also has SKCM white Alps, but not double shot caps. This case was intended to take a 386 or 486 mini-AT (not ATX) motherboard, so mid-'90s.

[ZedTheMan]

Anyone have any idea of what this board is or what switches lie within? https://rover.ebay.com/rover/0/0/0?mpre ... 3342327453

[listofoptions]

its got microswitch RW switches, no idea about the make/model
I was actually trying to nab that one XD

[Slom]

its got microswitch RW switches, [...]

Close ... its Micro Switch magnetic reed
wiki/Micro_Switch_magnetic_reed

[Noobmaen]

...which is micro switch RW.

[Slom]

Hmm, I read that as SW

[ZedTheMan]

its got microswitch RW switches, no idea about the make/model
I was actually trying to nab that one XD

Well don't worry, I was just more curious than anything! I wish you luck!

[Red_October]

Anyone have any idea of what this board is or what switches lie within? https://rover.ebay.com/rover/0/0/0?mpre ... 3342327453

Yeah I'd recognize it anywhere, I own one. It's a Sanders Associates 720 Data Display Station keyboard that's been repurposed into something else. I think mine has, too, it's missing that diode-logic circuit card and the switches are directly wired to a DA-15 plug with hippy cable. Mine's still in full Sanders 720 livery, though.

[Aran.E99]

Top.jpg (225.49 KiB) Viewed 6753 times

Anyone know anything about this? It looks like an Alfaskop 3700 keyboard (or a similar model) but I can't find anything on it. The keyboard matrix is hand wired and has ribbon connectors soldered to it. Possibly someone's DIY keyboard? It apparently has Clare-Pendar switches but I cannot confirm until I get it.

[Gelly]

Hello! I was referred here by a friend who said you guys can help identify almost anything.

One of my friends in an enthusiast group for the game "The Talos Principle" pulled the textures out for the terminal, and we've been having a heck of a time trying to figure out what it's modeled after. Croteam is known for doing high-quality scans of real objects for textures, such as actually going to ruins in Albania and Egypt to get very accurate texture work, and so it's just a matter of curiosity to see what terminal they might have gotten this from.

Thanks much for your time!

[Aran.E99]

Update - Pulled the spacebar and there is a sticker underneath confirming it is a Datasaab keyboard (Type E00101 0100). Switches are Clare-Pendar SF 5101 (magnetic reed). After seeing it in person, I am confident somebody took an old Datasaab keyboard, desoldered the switches, put them in a strange layout and hand wired them. Still would like to know which machine this originally came from though. (Apologies about the big images )

Comparison with an SMK 2nd Gen. Notice the bent spring - it's missing the magnet too :c

switch disassembled.jpg (2.24 MiB) Viewed 6619 times

switch open.jpg (1.13 MiB) Viewed 6619 times

keycaps.jpg (1.52 MiB) Viewed 6619 times

thicc doubleshot.jpg (2.25 MiB) Viewed 6619 times

datasaab.jpg (1.41 MiB) Viewed 6619 times

[Muirium]

@Aran:

What was the hand wiring hooked up to: a Teensy or something vintage? Seems a strange layout to try to use today, given the lack of alpha block keys. You'd need to memorise some pretty weird combos just to type brackets and commas!


@Gelly:

Nice piece of work. When I first saw the image, I thought of this!


https://rockybergen.com/papercraft/

Naturally, similar modelling work goes on inside games. Whoever put that together, I'm impressed. Can't say I recognise the hardware, however. For what little my knowledge is worth, it looks to be an AT or ATX era system, judging by the standard looking power supply on the back. That single populated card slot has some oddball ports on it. Could be a spot of creative licence all round. Got some pics of it as it appears in game?

If anyone knows what those graphical legends are about on the keyboard, meanwhile…

[Aran.E99]

@Muirium - nope, no controller. Appears to be wired as a 5x8 matrix.

wiring.jpg (1.95 MiB) Viewed 6561 times

looks like an old PYE PCB edge connector someone snapped.

connector.jpg (1.58 MiB) Viewed 6561 times

Coolest part is this old masking tape where someone has written what looks like a diagram for the PF keys!

diagram.jpg (1.67 MiB) Viewed 6561 times

I really wish I could source the missing keycaps - would make a cool restoration project.

[ghostdawg187]

I have not found anything about a Cherry G80-1800HPMDE. Can you please provide some information like what kind of keycaps and switches?

[Chyros]

H = doubleshot ABS
P = MX black (or clear if Reuters)
M = winkey
DE = German layout

wiki/Cherry_article_numbers

[kbdfr]

wiki/File:G80-1800_HPMDE_top.jpg

[ghostdawg187]

wiki/Cherry_article_numbers

Awesome! Now I am able decode any Cherry model number. Thank you very much and all the people contributing to the deskthority-wiki.

PS: Shame on me! I should have been able to get this information on my own. But I was in a hurry, so please bear with me!

[OleVoip]

After seeing it in person, I am confident somebody took an old Datasaab keyboard, desoldered the switches, put them in a strange layout and hand wired them. Still would like to know which machine this originally came from though.
datasaab.jpg

This keyboard came from an Alfaskop 3500 series terminal, which were sold from 1974 on until the end of the 1970ies, when they were succeeded by system 37 aka the 3700 series with reddish brown keys, not blue ones. There were several models in the 3500 series, also custom-made systems, but this one definitely has been tinkered with. That's sad, but, on the other hand, it probably wouldn't have survived otherwise.

[artlogic]

I have a 3rd party mechanical numeric keypad designed for an Apple II and I'm wondering if anyone can tell me information about the switches. Are they any good? Is this worth reverse engineering?

IMG_20190131_140918_1.jpg (3.58 MiB) Viewed 6385 times

IMG_20190131_131321.jpg (2.84 MiB) Viewed 6385 times

IMG_20190128_144836.jpg (3.37 MiB) Viewed 6385 times

The switches have four contacts (I think they're double pole?). I haven't been able to find much about the keyboard or any markings on the switches.

Any help is appreciated.

[matt3o]

I have a 3rd party mechanical numeric keypad designed for an Apple II and I'm wondering if anyone can tell me information about the switches. Are they any good? Is this worth reverse engineering?

that is an adorable piece. I would totally reverse engineer the hell out of it I don't know much about it sorry, I can't help

[Aran.E99]

After seeing it in person, I am confident somebody took an old Datasaab keyboard, desoldered the switches, put them in a strange layout and hand wired them. Still would like to know which machine this originally came from though.
datasaab.jpg

This keyboard came from an Alfaskop 3500 series terminal, which were sold from 1974 on until the end of the 1970ies, when they were succeeded by system 37 aka the 3700 series with reddish brown keys, not blue ones. There were several models in the 3500 series, also custom-made systems, but this one definitely has been tinkered with. That's sad, but, on the other hand, it probably wouldn't have survived otherwise.

Thanks, I figured as much but thought it was an Alfaskop 3700 since theres little info on google . Although not ideal, I'm considering rewiring it using a Teensy so at least it's its usable

[Muirium]

Ha, what a wiring job! I see whole switches with nothing connected. Definitely fair game to do your own Teensy refit.

You may well be right that particular keyboard only survived because someone chose to do this. Such old gear always has a story.

[Felima]

Does anyone know what keyboard could this be?
Model name is Typ 263.12
Thank you

[davkol]

263.12, obviously, from Metra Blansko

The keycaps are dyesub PBT with the apparent bleed.