Stuff you just bought

[Moosewing]

Took a gamble on a Monterey K103 last week and it just arrived today. Was expecting white Alps but hoping for Omron Alps-styles, ended up with blue Alps. Never expected to get blues for less than $200, especially not in such a nice board. Good build quality, doubleshot keycaps, 2u backspace, deliciously thick arrow key legends; couldn't ask for much more. The keycaps are filthy but the switches are surprisingly not bad. Shouldn't take more than some air duster to make them feel close to perfect. Unfortunately my phone's camera is broken so I can't get any pics of it aside from the ones in the ebay listing.

A few weeks ago I acquired the same Monterey board. Indeed, nice build quality and keycaps.
However, it doesn't work with my cheap no-name PS/2 - USB adapter. May I ask what DIN to USB adapter you are using.

I use a 5-pin DIN to USB Soarer's converter from Orihalcon. My Hasu PS/2 to USB converter works fine as well.

[cli]

Took a gamble on a Monterey K103 last week and it just arrived today. Was expecting white Alps but hoping for Omron Alps-styles, ended up with blue Alps. Never expected to get blues for less than $200, especially not in such a nice board. Good build quality, doubleshot keycaps, 2u backspace, deliciously thick arrow key legends; couldn't ask for much more. The keycaps are filthy but the switches are surprisingly not bad. Shouldn't take more than some air duster to make them feel close to perfect. Unfortunately my phone's camera is broken so I can't get any pics of it aside from the ones in the ebay listing.

A few weeks ago I acquired the same Monterey board. Indeed, nice build quality and keycaps.
However, it doesn't work with my cheap no-name PS/2 - USB adapter. May I ask what DIN to USB adapter you are using.

I use a 5-pin DIN to USB Soarer's converter form Orihalcon. My Hasu PS/2 to USB converter works fine as well.

Thanks! I will check the Soarer's converter from Orihalcon.

[Darkshado]

This:

2019-03-12 20.12.47.jpg (3.3 MiB) Viewed 10589 times

Cleaned up

2019-03-20 22.59.47.jpg (3.71 MiB) Viewed 10589 times

Works

2019-03-21 01.02.35.jpg (2.87 MiB) Viewed 10589 times

[PlacaFromHell]

My first M110 It's from Japan!

[Polecat]

Just found a Silitek SK-0002-1M at my favorite junk store. White Pine SKCM (1991, not the early ones), and immaculately clean inside. It was literally laying on the ground outside, but not a bit of yellowing. Multicolor Taiwanese (?) legends on printed caps. Serial number is 910100011, probably the 11th one built in the first week of 1991? I've seen these with a Liteon label, and I found one a year or so back that was sold as a Northgate, but this is the first time I've seen Silitek (the actual manufacturer) branding. The only damage besides a slightly crushed DIN plug is a bit of road rash on the three right side keys on the numpad from being stepped on. Should be the same as an AT101W, so no big deal.

[zslane]

iGK61 with Halo True switches and GMK Nautilus keycaps.

nautilus_igk61.jpeg (680.24 KiB) Viewed 11899 times

I decided to get one of these because I'd been on the lookout for a decent 60% hotswap board with a standard ANSI (i.e., Pok3r) layout, and after watching Chyros' video review I decided this was the one to go with. So far it is working quite nicely with my iPad.

[PlacaFromHell]

I got a model F122 for 500 ARS (about 12 USD) I'm super happy

[Darkshado]

Nice catch! Is it an Argentinian terminal layout?

[depletedvespene]

I'd like to see a better picture (but I'm willing to bet it's gonna be closer to a Spanish (Latin America) layout).

[PlacaFromHell]

Sorry, the listings just disappear when someone buys the product and I can't check the pictures again. I don't really know when I saw a model F for that price I got mad and bought it.

[depletedvespene]

Ok, show us the pics when it does show up at your door (let's hope it's indeed an F122 and not an M122).

[PlacaFromHell]

Dont' worry, I will. I can confirm it's a model F because of the metal backplate. and the rusty spots under the keycaps.

[wellbeing44]

Linjars, going into a build soon

[depletedvespene]

I have done it!!!!!! I have ordered my model M from ChewDrebby!!!! I bought it for 60 euros.
I hope it arrives fine!

Look at that mfg. date, squid. Have you hugged your keyboard already?

[PlacaFromHell]

I finally got it. I think the owner had alzheimer or something. Smells like dog but feels very good.

[CL4P-TP]

I don't know if it works but I'm super happy

[Findecanor]

Linjars, going into a build soon

Linjära

[Menuhin]

Linjars, going into a build soon

Linjära

Seems like a modern super linear according to video reviews:
- so little wobble like filmed retooled blacks
- so smooth every unlubed more than the retooled blacks
- sounds like the Cherry blacks with these housings

Looking forward to someone with a build with these fully lubed

[TheInverseKey]

Linjars, going into a build soon

Linjära

Seems like a modern super linear according to video reviews:
- so little wobble like filmed retooled blacks
- so smooth every unlubed more than the retooled blacks
- sounds like the Cherry blacks with these housings

Looking forward to someone with a build with these fully lubed

Just like IKEA you have to assemble them yourself.

[JP!]

Just scored this beauty to go along with my smaller Burroughs keyboard.

burroughs.jpg (178.66 KiB) Viewed 11315 times

[Peter_Cantrope]

Hi everybody.
I've recently got the "Clicker" board, GOGAPC-21 by Tai-Hao, Type I.
wiki/Tai-Hao_APC_semi-mechanical_keyboa ... eyboard.29
The board is not sturdy, and when you shake it the keys rattle so much that it can be used as a tambourine. BUT: the keys feel so incredibly good, it is just unbelievable. I have a Chicony board with sky blue "Monterey" switches and a Model M, and I must admit that these "semi-mechanical" Tai-Hao APC switches just feel better. They also feel better than White Alps, Cherry MX Blue and all other Alps clones I have ever tried. I mean, a single key press on a Model M probably feels more satisfying than with these Tai-Hao, and "Montereys" are great in every aspect, they definitely sound better, but when it comes to actually typing large bodies of text (which is what I do at work) these Tai-Hao switches exceed the rest. Travel distance, tactility, feedback, weighting, profile and just about everything that's important for typing is amazing.

And the board hasn't been cleaned yet, the switches haven't been lubed. Can't imagine how it will feel when it's all nice and clean.

[abrahamstechnology]

I just got two of the FlagK boards that Chyros reviewed recently (with the linear white switches). I'm click modding one with leaves from CS switches and will probably sell the other. The linear switches are actually pretty good but I like super tactile and clicky.

[Polecat]

Chicony KB-5160C. It's absolutely immaculate, which I was not expecting. Futaba MA switches (MX mount) that are like new, and extremely consistent in sound and feel, with no wear at all on the caps. This version isn't in the Wiki, but I can take some photos if anyone wants to include it there. I bought this as a donor for another project, but now I'm not sure I can kill it off.

[CL4P-TP]

I've just bought two Filco Zero keyboards from Japan, black and white

[Slom]

I haven't bought a keyboard in a while, but smaller parts show up at my doorstep from time to time:

• micro switch PB with unknown mount
• linear (!) micro switch SC with mount for SD/SW key caps (!!)
• a numpad worth of micro switch KS with mount that fits the older SD/SW caps, a plate and some key caps to complete the set
• carbon cadet and novelties
• a sweatshirt because somebody decided that snow in may is the new German weather

DSC02480.JPG (814.49 KiB) Viewed 11080 times

DSC02481.JPG (767.79 KiB) Viewed 11080 times

Does anyone know that the connector on the rightmost switch is? Are these supposed to be soldered?

[pansku]

I think those are called turret terminals. The details on soldering and such can be found on the IPC-A-610 standard But yeah, you wrap a wire around it min.180° and solder it.

Screenshot_20190507_110259_com.google.android.apps.docs.jpg (426.55 KiB) Viewed 11029 times

Screenshot_20190507_110340_com.google.android.apps.docs.jpg (362.34 KiB) Viewed 11029 times

Screenshot_20190507_110359_com.google.android.apps.docs.jpg (434.54 KiB) Viewed 11029 times

[xicanoink]

My wife was Goodwilling and found this 32 year old beauty!

battle1.jpeg (2.47 MiB) Viewed 10991 times

battle2.jpeg (3.01 MiB) Viewed 10991 times

Great condition, hardly any dirt to clean off, looks barely used.

[Lbibass]

My wife was Goodwilling and found this 32 year old beauty!
battle1.jpeg
battle2.jpeg

Great condition, hardly any dirt to clean off, looks barely used.

Boy I wish I could find M122's at Goodwill. Nice find!

[Slom]

[...] wrap a wire around it min.180° and solder it.[...]

Thank you

[Prelim]

Seems like a modern super linear according to video reviews:
- so little wobble like filmed retooled blacks
- so smooth every unlubed more than the retooled blacks
- sounds like the Cherry blacks with these housings

Looking forward to someone with a build with these fully lubed