- 20200111_122655.jpg (1.75 MiB) Viewed 1687 times
Can anybody help me sort out which of these 10 pins correspond with Vcc, Ground, Data, and Clock?
Much thanks!
IBM Model F XT Controller Pinout?
-
JakeyPancakey
- Location: United States
- Main keyboard: Vortex Race3
- Main mouse: Corsair Scimitar Pro
- Favorite switch: Buckling spring
I recently purchased an IBM Model F XT on eBay without a working cable. I'm attempting a Soarer's XT to USB conversion but I'm unable to find any pinouts for this 10-pin connector on the board's controller.
Can anybody help me sort out which of these 10 pins correspond with Vcc, Ground, Data, and Clock?
Much thanks!
Can anybody help me sort out which of these 10 pins correspond with Vcc, Ground, Data, and Clock?
Much thanks!
-
anthonymak
- Location: Hong Kong
- Main keyboard: IBM Model F101
- Main mouse: Microsoft arc
- Favorite switch: Buckling Spring
- DT Pro Member: -
here is a photo which shows wiring to a teensy2.0
from top to bottom, only 1, 3, 4 and 5 are used and they belongs to the lower row of pin on the blue socket.
hope this help.
from top to bottom, only 1, 3, 4 and 5 are used and they belongs to the lower row of pin on the blue socket.
hope this help.
- Attachments
-
- IMG_9130.jpg (330.5 KiB) Viewed 1660 times
-
JakeyPancakey
- Location: United States
- Main keyboard: Vortex Race3
- Main mouse: Corsair Scimitar Pro
- Favorite switch: Buckling spring
Thank you for the quick response and helpful picture! That was the last bit of information that I needed to get my Soarer's converter up and runninganthonymak wrote: ↑20 Jan 2020, 04:18here is a photo which shows wiring to a teensy2.0
from top to bottom, only 1, 3, 4 and 5 are used and they belongs to the lower row of pin on the blue socket.
hope this help.
I'm now typing on my Model F!