New model F62 with solenoid

hypkx · 05 Apr 2020, 14:28

I was in a rush (because I was so excited to use it) so dont have any pictures from the inside

, but the build is really simple. It was hard for me to find a fitting solenoid on ebay, so used a old one I had laying around.
The one on the left.

This kind of solenoid was for a limited time available on ebay.
I removed the metal piece around it, because the foot piece was to big for fitting in the case. I think all original ibm solenoids will fit without chopping in the case (right side). Of course now the hammer will have no "cage", so I placed the solenoid directly infront of the right side of the keyboard case. The solenoid will now hammer direct at case (damped with a piece of foam tape).
Here a drawing

: DSC038421.jpg (294.83 KiB) Viewed 8237 times

The case has a really tight fit, the solenoid is taped down to the top and down with double-sided tape. The driver board is in a plastic bag stuffed inside the case.

Typing example:

More pictures from the keyboard in general. The keycaps are from an typewriter and a model M, also some relegendables.

Spoiler:

JP! · 05 Apr 2020, 19:18

Beautiful!

browncow · 05 Apr 2020, 19:46

i'm not a big fan of small boards like this but that's just absolutely damn awesome. i always wonder how would it feel with a solenoid if you could make it smack about under the pcb, so you could feel it bumping up your fingers when typing in this way

dcopellino · 05 Apr 2020, 20:04

Wow, was it purchase option? Pardon my ignorance....

hypkx · 05 Apr 2020, 21:31

You need a solenoid driver board and a solenoid, the additional pins on the f62 xwhatsit controller are already there.

ramnes · 05 Apr 2020, 22:19

Very nice! How do you like it in comparison to your FSSK (if you still have it)?

ddrfraser1 · 08 Apr 2020, 20:33

Awesome! Is this one of the new model f's from Joe or an original?

kmnov2017 · 11 Apr 2020, 16:21

These are the new model Fs, it says so right on the thread title.

hypkx · 11 Apr 2020, 17:07

ramnes wrote: ↑
05 Apr 2020, 22:19
Very nice! How do you like it in comparison to your FSSK (if you still have it)?

I sold my SSK because I never used it and needed money. I really like that every key feels and sounds very uniform on the new model F62. The size is almost the same I think.

Starbag · 09 Jun 2020, 15:25

What is the operating voltage of the solenoid, if I may ask?
thank you.